Crossover owners Nissan Qashqai first generation (J10 body), released between 2007 and 2013, often face the problem of interior and body elements becoming loose. Over time, the plastic clips that hold moldings, sills, door trims and dashboard panels in place lose their elasticity or break when removed.
Without quality auto clip It is impossible to ensure a tight fit of the parts, which leads to the appearance of extraneous sounds while moving and even to elements falling out during an unsuccessful wash. Replacing these seemingly small things is a fundamental part of the repair, affecting the perception of the quality of the car as a whole.
Types of fastenings and their classification on Nissan Qashqai J10
To select the correct spare parts, you need to understand that several types are used on one car. plastic clips. They differ in the shape of the stem, the diameter of the cap and the opening mechanism inside the hole. An error in choosing the type can lead to the fact that the clip simply does not fit into the standard seat.
The most common on Nissan Qashqai are mushroom clips (spacer type) and clips with antennae that unclench when pressed. There are also special fasteners for carbon inserts and decorative stickers that have a unique shape.
- 🚗 Mushroom clips - the most popular type for attaching roof moldings and plastic trims on doors.
- 🔩 Spacer clips — used for fastening thresholds and suspension elements, where high reliability is required.
- 🔧 Clamping clamps - used in the area of the dashboard and center console to hold soft plastic.
Original parts versus analogues: what to choose?
The question of choosing between original parts Nissan and high-quality analogues are very expensive. Original spare parts articles guarantee perfect fit to the size and quality of the plastic, which does not crumble from frost. However, their cost and availability in warehouses can become a problem for many car owners.
Analogs from trusted brands often offer better value for money, using softer or, conversely, harder plastic, depending on the task. It is important to carefully study the packaging, as low-quality copies may burst during installation.
A comparison of the characteristics of original and analogue products is presented in the table below so that you can make an informed decision before purchasing.
| Parameter | Original (OEM) | High-quality analogue | Cheap analogue |
|---|---|---|---|
| Material | High density polypropylene | Polymer mixture | Broken plastic |
| Unit price | High | Average | Low |
| Service life | More than 10 years | 5-7 years | 1-2 seasons |
| Availability | Often made to order | In stock | Everywhere |
⚠️ Attention: Never skimp on clips holding suspension or bumper elements, as their loss can lead to an accident or damage to the paintwork.
Article numbers and sizes of popular mounts
For those who are used to searching for spare parts by numbers, it is important to know the basic OEM codes, which are used on Nissan Qashqai J10. Often the same number can fit different generations of cars, but the stem diameter can vary by a millimeter, which is critical for a tight fit.
The most popular numbers are for attaching front and rear moldings, as well as threshold clamps. It's a good idea to always have a caliper handy to check the diameter of the hole and the clip leg before purchasing, especially if you're ordering parts online.
- 📐 Cap diameter - usually varies from 10 mm to 22 mm depending on the body element.
- 📏 Leg height - a critical parameter that determines the thickness of the material that needs to be fixed.
- 🛠️ Leg type - can be smooth, grooved or with tendrils, which affects the holding power.
- Original Nissan
- Chinese analogues
- All-in-one kits
- I don't know, I need advice
Tools and preparation for replacement
Replacement process plastic clips requires not only spare parts, but also special tools. Using screwdrivers or knives often damages the decorative panel or the clip itself, making it impossible to reinstall. The right tool will save you time and stress.
You will need a set of plastic spatulas to carefully pry the elements, as well as a special clip remover if they are stuck deep in the hole. It would also be a good idea to have fine-nosed pliers to remove the remnants of old broken legs.
⚠️ Attention: If you use a metal tool, be sure to wrap it with electrical tape or use soft pads to avoid scratching the plastic when dismantling.
☑️ Preparing to replace clips
Step-by-step instructions for replacing clips
Replacement fastenings on Nissan Qashqai - a process that requires accuracy and consistency. First, you need to dismantle the element on which the lock has broken, carefully inspecting all attachment points so as not to damage other parts.
After removing the part, remove the old clips. If the leg remains inside the hole, use a thin drill bit or a special drift to carefully knock out the remaining plastic without widening the hole. Clean the seat from dust and debris so that the new clip fits tightly.
New car clip insert into the hole until you hear a characteristic click, making sure that it is flush with the surface. Only after this can you screw or snap the part into place, checking the reliability of the fixation.