Portable acoustics in the “soundbar” format or powerful speakers with deep bass have become an integral part of modern leisure. Model Kicks Gorilla Bass E15 occupies a niche of budget, but extremely aggressive-sounding devices that can transform an ordinary party into a concert hall.
Owners are often faced with the question: how to get the most out of this device without overloading the amplifier? Kix Gorilla Bass E15 is not just a speaker, but a complex system that requires proper power supply and equalizer settings to unlock the potential of low frequencies.
In this article we will analyze the technical features, connection nuances and settings that are often missed in standard instructions. You'll learn how to avoid distortion at maximum volume and why power does not always equal sound quality.
Design features and housing design
The first thing the user notices when unpacking is the massive case, made of impact-resistant plastic with rubber inserts. This design is designed specifically to withstand active use on the street and in noisy companies. Moisture protection allows you to use the device in the rain, but do not immerse it in water.
On the front panel there is a huge woofer, covered with a metal mesh, which simultaneously serves as protection and a decorative element. On the back you will find the main connection ports: USB, AUX, TF card reader and power jack. Pay special attention to the quality of contacts, since the stability of signal transmission depends on this.
Many users note that the carrying handle is integrated into the body too deeply, which creates inconvenience when transporting with one hand. However, this decision is dictated by the need to maintain the balance of the device when moving.
Specifications and sound
The heart of the model Kicks Gorilla Bass E15 is a Class D amplifier that provides high efficiency with relatively low power consumption. The declared peak power can reach impressive values, but the real RMS indicator more important for assessing sound quality over long listening sessions.
Low frequencies in this model are highlighted separately thanks to a system of passive radiators located on the sides of the body. They create an effect air vibrations, which is felt physically and not just audibly. This makes the device ideal for hip-hop, electronic music and rock genres.
The high-frequency range may seem a little compressed compared to competitors at a higher price point, but for a street party this is not critical. The main thing here is bass saturation and the ability of the speaker to operate at maximum volumes without wheezing.
- 🔊 Bluetooth 5.0 codec support for stable communication
- 🔋 Built-in battery with a capacity of 4000 to 6000 mAh
- 🔌 Availability of an output for connecting a microphone with an echo effect
Instructions for first connection and setup
Before turning on for the first time, make sure the battery is charged at least 50%. This will prevent possible firmware failures when attempting to update or calibrate. Enter Power Mode by holding the Power button for 3 seconds until a beep sounds.
To connect your smartphone, use Bluetooth mode, which is activated automatically the first time you turn it on. If the device does not see the phone, go to Bluetooth settings on your gadget and select Kicks Gorilla Bass E15 from the list of available devices. A password is usually not required, or it is standard 0000.
It is important to adjust the equalizer immediately after turning it on. The default settings may be too bright, causing hearing fatigue. Use manual adjustment LF and HF to achieve a balanced sound with your music.
☑️ Initial speaker setup
If you connect the speaker to your computer via an AUX cable, make sure that the output power of the sound card matches the input parameters of the device. Excessively high signal levels can result in clipping and distortion, even at low speaker volumes.
⚠️ Attention: Do not leave the device connected to the charging network after the battery is fully charged. This may shorten the battery life due to overheating of the batteries.
- Pop
- Rock and Metal
- Hip Hop and Bass
- Classical and Jazz
Operating modes and additional functions
Model Kicks Gorilla Bass E15 equipped with a set of modes that are switched by a button on the body. The main mode is normal playback, but there is also a special mode Bass Boost, which extremely enhances low frequencies.
When activating the bass boost mode, you must carefully monitor the volume level. At high values, passive radiators can begin to vibrate so much that it causes mechanical noise or even damage to the housing.
There is also a TWS (True Wireless Stereo) function that allows you to combine two speakers into a stereo pair. This doubles the power and creates a surround sound effect, which is critical for large rooms or outdoor areas.
Some users note that when using karaoke mode via a microphone, the sound delay (latency) can be noticeable. This is due to signal processing algorithms and is not a defect, but it does require some getting used to when singing.
- 🎤 Microphone connection via 6.35 mm Jack
- 🎛️ Adjusting the pitch of the voice (Pitch Control)
- 🔄 Track repeat and random playback mode
Operation problems and ways to solve them
The most common problem is that the battery drains quickly when used at maximum volume. This is a physical law of battery operation, but you can optimize the process by turning off the backlight and reducing bass by 20-30%.
Sometimes there are problems with Bluetooth connection when the device sees the phone, but does not play sound. In this case, you need to reset the speaker settings to factory settings by holding down the button combination Power + Volume Down for 10 seconds.
If the speaker makes clicking or interrupting sounds, check the source of the signal. Often the problem lies not in the device, but in bad sectors on a flash card or a damaged audio file. Try downloading the track in the format WAV or FLAC instead of compressed MP3.
If the amplifier overheats, the protection system will work and the device will turn off. Allow the column to cool for 15-20 minutes before turning it on again. Forced cooling by fans is not required, since the case has a passive ventilation system.
Comparison with analogues on the market
In the segment of budget portable speakers Kicks Gorilla Bass E15 competes with models from JBL, Sony and Tronsmart. The main advantage of this model is the ratio of price and peak bass power. It often outperforms competitors in the 60-100 Hz range.
However, when comparing build quality and moisture protection, branded models can benefit from the use of more expensive materials and IPX7 certification. Kix Gorilla Bass E15 is aimed at users who care about aggressive sound picture.
The table below provides a comparison of key characteristics with popular analogues:
| Model | Power (RMS) | Opening hours | Protection | Price |
|---|---|---|---|---|
| Kicks Gorilla Bass E15 | 30 W | 6-8 hours | Splash protection | Average |
| JBL Flip 6 | 25 W | 12 o'clock | IP67 | High |
| Tronsmart T7 | 30 W | 15 hours | IPX6 | Average |
| Sony SRS-XB33 | 25 W | 24 hours | IP67 | High |
Choice in favor Kicks Gorilla Bass E15 Justified if you're looking for maximum volume and bass for minimal money. If autonomy and premium build quality are your priority, you should consider more expensive options.
⚠️ Attention: When purchasing, pay attention to the integrity of the packaging and the presence of a warranty card. Counterfeits often have cheaper power components, which reduces actual operating time.
FAQ: Frequently asked questions
Can the speaker be used in the rain?
Yes, the model has basic protection against splashes and rain, but it cannot be immersed in water. Avoid direct contact with pressurized water jets.
How to reset settings to factory settings?
Press the power and volume down buttons simultaneously for 10 seconds until you hear a reset beep. After this, the device will reboot.
Why does the speaker turn off at high volume?
This triggers protection against battery overload or amplifier overheating. Let the device cool down and lower the volume.
Does the device support TWS function?
Yes, you can combine two identical speakers to create a stereo pair by pressing the TWS button on one of them.
What cable is needed to connect to the phone?
For a wired connection, a standard cable with 3.5 mm connectors (AUX) is used. For wireless – Bluetooth 5.0.
The final choice depends on your priorities. If you need maximum bass for a minimum price, That Kicks Gorilla Bass E15 will be a great companion at any party. Proper use and compliance with charging recommendations will ensure a long life for the device.