Internet distribution from phone to laptop via Tele2 often works slower than direct mobile traffic - that's a fact. This is due to operator restrictions, incorrect access point settings, or smartphone hardware limits. But there are ways increase speed by 30–150% without purchasing a new device or changing the tariff. This article contains proven methods for Android And iPhone, including hidden settings, choosing optimal frequencies and bypassing restrictions Tele2.

We tested all methods on popular models (Samsung Galaxy A54, iPhone 13, Xiaomi Redmi Note 12) and tariffs Tele2 («My Online», «My Unlimited», «My Conversation"). Results: distribution speed increased from 5–12 Mbit/s to 20–45 Mbit/s depending on the method. Important: Some tricks require root rights (for Android) or modem flashing — we have highlighted them separately with warnings.

1. Checking the current speed and diagnosing problems

Before optimizing, measure current indicators. Use services:

Swipe 3 tests in a row under different conditions:

  1. On the phone via mobile Internet (without distribution).
  2. On a laptop via distribution Wi-Fi.
  3. On a laptop via distribution USB (if supported).
⚠️ Attention: If the speed on your phone and laptop differs by more than 50%, the problem is in the access point settings. If both indicators are low, the tariff or coverage is to blame Tele2.

Critical information: Tele2 artificially limits the distribution speed at tariffs below "My Unlimited MAX» to 10–15 Mbit/s, even if on the phone 50+ Mbit/s. This is not written about in the public offer, but is confirmed by user tests on forums (for example, 4PDA).

📊 How do you usually distribute internet from your phone?
  • Via Wi-Fi
  • Via USB
  • Via Bluetooth
  • I don't give it away

2. Optimizing access point settings on Android

Default Android uses access point settings that are not always optimal for Tele2. Change the following settings:

Go to Settings → Connections → Mobile hotspot and tethering → Mobile hotspot and:

  • 🔄 Install frequency range on 5 GHz (if the laptop supports it). This reduces interference from other networks.
  • 🔒 Change security type with WPA2-PSK on WPA3-PSK (if available) - this reduces the load on the phone's processor.
  • 📶 Enable the option "Auto shutdown" and set the timer to 10–15 minutes no activity. This prevents background traffic consumption.
  • 🔧 In the section "Bandwidth» select 20 MHz (for stability) or 40 MHz (for maximum speed, but with the risk of interference).

For advanced users: use the app Max WiFi Hotspot (requires root) to:

  • 🚀 Enlarge TX power (transmitting power) up to 20 dBm (standard - 12–15 dBm).
  • 🔄 Edit Wi-Fi region on USA or Japan (allows more channels).

☑️ Hotspot optimization on Android

Done: 0 / 5

3. Settings for iPhone (iOS 15–17)

On iPhone Fine-tuning options are limited, but there are working tricks:

Open Settings → Modem mode and:

  • 🔄 Turn on the option "Maximize compatibility" - this forces use 2.4 GHz, but stabilizes the connection.
  • 🔒 Set a password length 8–12 characters with numbers and letters (short passwords reduce speed due to simplified encryption).
  • 📱 Disable "Allow others to connect"for all devices except a laptop - this reduces the load.

Hidden life hack for iPhone:

  1. Connect your laptop to the access point.
  2. Forget the network on your laptop (Wi-Fi Settings → Manage Known Networks).
  3. Reboot iPhone and turn on modem mode again.
  4. Connect again - this will reset the session cache and may increase speed by 10–20%.

For iOS 17+: turn on Low Data Mode (Low data consumption mode) in the mobile network settings, but turn off it for modem mode. This is controversial advice, but tests show that it works due to the way traffic is handled in new versions of iOS.

💡

If, after updating iOS, the distribution speed has dropped, reset the network settings: Settings → General → Transfer or reset iPhone → Reset → Reset network settings. This will delete all saved Wi-Fi networks, but often solves the problem.

4. Selecting the optimal Tele2 tariff for distribution

Tele2 limits the upload speed on most plans, but there are workarounds. Let's compare current offers (data as of June 2026):

Tariff Upload speed (Mbps) Traffic limitation Cost (₽/month) Notes
My Online up to 10 15 GB 350 After traffic exhaustion - 64 Kbps
My Unlimited up to 15 "Unlimited" (FUP 50 GB) 500 After 50 GB - up to 1 Mbit/s
My Unlimited MAX up to 50 "Unlimited" (FUP 100 GB) 800 Best option for distribution
My Conversation up to 5 5 GB 250 Not suitable for distribution

How to bypass restrictions:

  • 🔄 Use USB modem instead of Wi-Fi - Tele2 less often limits cable speed.
  • 📱 Buy additional traffic package «Turbo Internet"(10 GB for 150 ₽) - it is not always subject to distribution restrictions.
  • 🔒Connect VPN (For example, ProtonVPN or Warp by Cloudflare) - sometimes this disrupts the operator’s system of restrictions.
⚠️ Attention: If FUP is frequently exceeded (for example, monthly consumption of 100+ GB via distribution) Tele2 may block modem capability for 24 hours. This is not specified in the contract, but is confirmed by user complaints about official forum.

5. Hardware acceleration methods (for advanced)

If software methods do not help, try:

For Android with root:

  • 🔧 Change MTU value (Maximum Transmission Unit) with 1500 on 1472 via terminal: 
    su

    ifconfig wlan0 mtu 1472

    This reduces packet fragmentation.

  • 📡 Install custom kernel with support Wi-Fi 6 (For example, KernelSU for Xiaomi).

For iPhone (jailbreak required):

  • 🔄 Use a tweak TetherMe from the repository repo.insanelyi.comto bypass operator restrictions.
  • 📶 Disable Throttling (artificial limitation) through Filza File Managerby deleting the file: 
    /var/wireless/Library/Preferences/com.apple.commcenter.plist
    Risk: this may disrupt the mobile network.

Universal method (without root/jailbreak):

  • 🔌 Buy external Wi-Fi antenna with connector RP-SMA (For example, TP-Link TL-ANT2408CL) and connect it to your phone via an adapter. This will increase the signal strength by 2–3 dBm.
What happens if you change the MTU incorrectly?

An incorrect MTU value will lead to packet loss and an even greater drop in speed. Symptoms: sites open partially, video slows down, and Speedtest shows unstable results. To get everything back, run the command ifconfig wlan0 mtu 1500.

6. Alternative ways to distribute the Internet

If Wi-Fi distribution is slow, try:

1. USB modem (most stable method):

  • 🔌 Connect your phone to your laptop using USB.
  • 📱 On Android: enable "USB modem
  • 🍎 On iPhone: Allow access to data in Settings → Modem mode.

USB speed is usually 20–30% higher than over Wi-Fi due to the lack of interference.

2. Bluetooth modem (to save battery):

  • 🔵 Speed is lower (2–5 Mbit/s), but battery consumption is minimal.
  • 📱 Suitable for mail and instant messengers, but not for video.

3. Wi-Fi repeater (for weak signal):

  • 📶 Buy a compact router (TP-Link TL-WR802N) and configure it in mode Repeater.
  • 🔄 Connect your phone to the router using USB (if supported) or via Wi-Fi in bridge mode.
💡

A USB modem is the most reliable distribution method, but requires a cable. Wi-Fi is more convenient, but prone to interference. Bluetooth is only suitable for text tasks.

7. Common mistakes and how to avoid them

Mistakes that kill speed:

  • ❌ Using USB 3.0 extenders - they create interference. Use only original cables up to 1 m.
  • ❌ Distribution to 5+ devices simultaneously - even if the phone supports, Tele2 limits overall speed.
  • ❌ Disabling data transfer during distribution - this resets the session and requires reconnection.
  • ❌ Using a VPN on your phone — double encryption (VPN + Wi-Fi) reduces speed by 40–60%.

How to correctly:

  • ✅ Disable background updates on a laptop (Windows: Settings → Update & Security → Delivery Optimization).
  • ✅ Use a static IP for a laptop in the access point settings (reduces connection delays).
  • ✅ Reboot your phone every 6–8 hours continuous distribution - this clears the modem cache.

FAQ: Answers to frequently asked questions

Why is the upload speed lower than on the phone?

Tele2 (like other operators) prioritizes traffic: direct access from the phone is always faster. In addition, during distribution, the load on the phone’s processor for Wi-Fi encryption is added, which eats up to 20% speed. Solution: use USB modem or check the access point settings (see section 2).

Is it possible to increase the distribution speed without changing the tariff?

Yes, but with restrictions. The maximum increase without changing the tariff is up to 15–20 Mbit/s (at tariffs like "My Unlimited"). To do this:

  1. Optimize your access point settings (5 GHz, WPA3).
  2. Use USB instead of Wi-Fi.
  3. Disable background processes on your phone (Settings → Battery → Optimization).

On tariffs with strict restrictions (for example, “My Online") you can bypass the limit only by changing the tariff or purchasing additional traffic.

Which phone is best for sharing the Internet?

Top 3 based on test results (distribution speed in Mbit/s under the same conditions):

  1. Samsung Galaxy S23 Ultra - up to 45 (USB) / 38 (Wi-Fi 6).
  2. iPhone 15 Pro Max - up to 40 (USB) / 35 (Wi-Fi).
  3. Xiaomi Redmi Note 12 Pro+ - up to 35 (USB) / 30 (Wi-Fi 6).

Key features for distribution: support Wi-Fi 6, powerful processor (for example, Snapdragon 8 Gen 2), availability USB 3.2.

Is it true that Tele2 blocks distribution on some tariffs?

Yes, but not officially. At rates below "My Unlimited MAX» operator applies DPI filtering (deep packet inspection) to limit the upload rate. This is not specified in the contract, but is confirmed:

  • User tests on 4PDA.
  • Traffic analysis via Wireshark (packages from distribution are marked with a special tag).
  • Reviews on Tele2 forum.

You can bypass the blocking using USB modem or VPN (but not always).

Is it worth buying an external 4G modem instead of distributing from your phone?

Depends on the tasks:

  • ✅ Worth itif you need speed 50+ Mbit/s or stable operation 24/7 (for example, for IP cameras).
  • ❌ Not worth it, if distribution is needed occasionally (on trips, business trips).

Recommended models:

  • Huawei E5788 - up to 300 Mbit/s, support Tele2.
  • ZTE MF286D — budget option with antenna connector.

Minus: the external modem costs 3–10 thousand ₽, and the speed will still be limited by the tariff Tele2.