How to correctly set the clock on a Nissan Qashqai: instructions for all generations

Time on the on-board computer Nissan Qashqai - these are not just numbers on the display, but an important element of the system that affects the operation automatic lighting, travel log and even diagnostic functions. An incorrectly set clock can lead to failures in event recording (for example, engine errors) or incorrect operation of the heating timer. The problem is especially acute after replacing the battery or resetting the BC settings, when the time is reset to factory values.

In this article we will look at all ways to set the time for Qashqai J10 (2006–2013), J11 (2013–2021) and restyled versions, including models with NissanConnect. You'll learn how to synchronize your watch automatically via GPS or manually, and what to do if the time gets lost on its own. The instructions are suitable for petrol and diesel versions, including versions with 1.2 DIG-T, 1.6 dCi And 2.0 MR20DD.

Preparing to Set the Time: What You Need to Know

Before you start changing the time, make sure that:

• 🔋 The battery is charged (voltage is not lower than 12.4 V), otherwise the settings may not be saved.
• 📡 If you plan to use automatic synchronization, check the GPS signal (navigation must be active).
• 🔑 The ignition key is in the ACC or ON (it is not necessary to start the engine).
• 📄 The operating instructions for your modification are at hand (sections Clock Settings or Display).

On Qashqai J10 (dorestayl) and J11 (after 2017) the setting algorithm is different. For example, in older versions, to enter the watch menu you need to hold down the button MODE, and in new ones - use the touch screen or joystick NissanConnect. It is also important to consider time display format: 12-hour (AM/PM) or 24-hour. In Russia, the 24-hour format is used by default, but after purchasing a used car from Europe or Asia, it can be changed.

⚠️ Attention: If after replacing the battery the time is lost every 2-3 days, the problem may lie in a faulty generator or fuse box (fuse F30 is responsible for powering the clock in some modifications). Check the voltage at the terminals with a multimeter.

Method 1: Manually setting the time on Qashqai J10 (2006–2013)

In the first generation Qashqai The clock is set via buttons on the steering wheel switch or the climate control panel (depending on equipment). Here is a step-by-step algorithm:

1. Turn the ignition to position ACC (or ON).
2. Find the button MODE on the steering switch (right) and hold it 3–5 secondsuntil the time flashes on the display.
3. Short presses on MODE switch between fields (hours/minutes).
4. Use the buttons to change values + And – on the same switch.
5. After setting, hold MODE again to save the changes.

Available with Bose or Tekna there may be a separate button CLOCK on the climate control panel. In this case:

1. Press and hold CLOCK until the clock blinks.
2. Adjust time using buttons ↑/↓ on the same panel.
3. Press to exit CLOCK one more time.

Is the hour/minute field flashing?|Is the correct format selected (24/12 hours)?|Are the settings saved after turning off the ignition?|Has the display been checked on all screens (on-board computer, multimedia)?

-->

Important: On Qashqai J10 with the system Carwings (Japanese versions) time can be synchronized automatically via satellite, but only with an active connection to the service. In Russia, this function does not work - manual configuration is required.

Method 2: Setup via NissanConnect (Qashqai J11 2013–2026)

In the second generation Qashqai (especially after restyling in 2017) the clock is configured through the multimedia system NissanConnect. The interface may differ depending on the firmware version, but the general algorithm is as follows:

1. Turn on the ignition or start the engine.
2. On the home screen NissanConnect click Settings (gear in the lower right corner).
3. Select System → Date and time.
4. Disable the option Auto-sync (if it is active).
5. Click on the time field and manually set the hours/minutes using the virtual keyboard.
6. Save changes with the button OK.

If your package includes navigation, you can enable automatic GPS synchronization:

• 📡 On the menu Settings → Date and time activate GPS synchronization.
• 🚗 Drive 2–3 km for the system to receive a signal from the satellite (synchronization does not work in tunnels or underground parking lots).
• ⏱️ Check the time accuracy after 5-10 minutes.

⚠️ Attention: On Qashqai J11 With firmware before 2019, there is a bug when, after automatic synchronization, the time is lost by 1–2 hours. The solution is to update the software via Nissan Service or manually roll back the clock setting 1 hour ago (if Moscow time is used).

How to update NissanConnect firmware to fix timing bugs?

1. Download the latest firmware from the official Nissan website (section Support → Software Updates).

2. Copy the file to a flash drive (FAT32, no more than 32 GB).

3. Insert the flash drive into the media's USB port and follow the on-screen instructions.

4. After updating, perform a factory reset (Settings → Reset → Reset time).

Method 3: Setting via on-board computer (BCM)

On some modifications Qashqai (especially diesel ones or with a package Safety Shield) time is duplicated in on-board computer (BCM). To sync it with the main clock:

1. Click the button INFO on the steering wheel switch (or button BC on the instrument panel).
2. Use the joystick to select the menu Time/Date.
3. Hold the center joystick button to activate edit mode.
4. Rotate the joystick left/right to select hours/minutes, up/down to change values.
5. Press the joystick again to save.

If the time in BCM and the media do not match, the settings take precedence NissanConnect. To sync them:

1. Go to Settings → System → Data synchronization.
2. Select Synchronize with BCM.
3. Confirm the action.

Model	Setting method	Features
Qashqai J10 (2006–2013)	Buttons on the steering wheel/climate control	No automatic synchronization, only manual
Qashqai J11 (2013–2017)	NissanConnect or BCM	GPS synchronization support, bugs are possible
Qashqai J11 Restyle (2017–2026)	Touch screen or voice commands	Automatic update when connected to Nissan Server
Qashqai with Carwings (Japanese versions)	Via the service menu	Requires active subscription to NissanConnect Services

Common problems and their solutions

Even after correct settings, the time Nissan Qashqai may behave incorrectly. Let's look at typical situations and ways to eliminate them:

1. Time gets lost after turning off the ignition

Reasons:

• 🔋 Battery is discharged (voltage is lower 12.2 V).
• 🔌 The generator or charging relay is faulty.
• 🔧 BCM memory is damaged (re-flashing required).

Solution: Check the battery with a tester, measure the leakage current (the norm is up to 50 mA). If the problem is in the BCM, contact the service for diagnostics. CONSULT-III.

2. Automatic sync doesn't work

Reasons:

• 📡 There is no GPS signal (for example, in a garage).
• 🌍 The time zone is set incorrectly.
• 🔄 Outdated NissanConnect firmware.

Solution: Update the firmware, check the time zone settings (Settings → Date and time → Time zone). If the GPS module is faulty, it will need to be replaced (part number for Qashqai J11 — 285A0-JM00A).

3. The clock shows the wrong format (AM/PM)

This problem is typical for imported versions Qashqai. To switch to 24-hour format:

1. Go to Settings → Date and time.
2. Select Time format.
3. Install 24 hours.

Additional time-related features

On Nissan Qashqai Time is used not only for display, but also for the operation of other systems:

• ⏰ Warm-up timer: In models with Webasto or standard heating, the time is determined by the scheduled start. Setting: Climate control → Timer → Set time.
• 📊 Trip log: B NissanConnect The start/end time of the trip, fuel consumption and average speed are recorded. If the time is wrong, the data will be incorrect.
• 🚨 Emergency Alert System (eCall): In the event of an accident, the time of the accident is transmitted to the rescue service. If the settings are incorrect, this can make prompt assistance difficult.

Also on some versions Qashqai function available "Automatic headlights" by time. For example, you can program the lights to turn on from 18:00 to 6:00. Setting:

1. Go to Settings → Lighting.
2. Select Autolight by time.
3. Set the operating interval.

FAQ: Answers to frequently asked questions

Is it possible to set the time on a Qashqai without the ignition?

No, changing time requires at least position ACC (dashboard power supply). The exception is models with NissanConnect and backup power (can be configured within 10 minutes after turning off the ignition).

Why does the time reset to 00:00 after replacing the battery?

This is standard behavior - when power is removed, the BCM memory is reset. To avoid the problem, use a backup power source (such as CTEK) when replacing the battery.

How to synchronize the time on Qashqai with your phone via Bluetooth?

This feature is only available on models with NissanConnect Services (subscription required). Connect your phone, then go to the menu Settings → Synchronization select Synchronize with smartphone.

What should I do if the MODE button does not respond when setting the time?

Check the steering column switches for mechanical damage. If the button works in other menus (for example, when switching tracks), the problem may be in the BCM firmware - diagnostics are required.

Is it possible to set the time on a Qashqai via an OBD scanner?

Yes, using diagnostic devices (Launch X431, Autel) you can change the time via the BCM. However, this requires knowledge of memory addresses and is not recommended for beginners.