Owners Nissan Almera G15 generations are often faced with the need to dismantle the rear sofa. This may be required for transporting large cargo, carrying out noise insulation work, or replacing the upholstery. The removal process seems complicated due to hidden fasteners, but with the right approach and a minimum set of tools, the task can be solved quickly.
The design of the seats in this model has its own characteristics that differ from previous generations or competitors. Incorrect force may break the plastic clips or damage the upholstery. In this article we will analyze each stage so that you can safely and accurately dismantle interior elements.
Preparing tools and workspace
Before starting any work on disassembling the interior, it is necessary to prepare the workplace. Make sure the vehicle is on a level surface and the handbrake is firmly set. To dismantle you will need a standard set of tools, which is in the trunk of almost every car enthusiast.
The main tool will be a plastic clip remover or a flat-head screwdriver with a rounded edge. A set of sockets and a ratchet will also be useful, since some of the fasteners may be bolted. Don't forget to wear gloves to avoid injuring your hands on the metal frame elements or sharp plastic edges.
- 🛠️ Puller for plastic clips or flat screwdriver
- 🔧 Set of 10 and 12 mm sockets with ratchet
- 🧤 Work gloves (textile or leather)
- 📸 Smartphone for photographing the process
It is important to clear the interior floor of debris and small objects. Sand or small stones can scratch the floor when removing seats or get stuck in the mechanisms. If you plan to transport something heavy, it is better to remove the seats in advance to avoid lugging them back dirty.
⚠️ Attention: Use only soft-tipped screwdrivers when prying plastic panels to avoid scratches on decorative elements of the interior Nissan Almera.
Removing the bottom cushion of the rear sofa
The lower part of the seat (cushion) is attached to the body in two main ways: through the lower fastenings and through the upper fastenings. B Nissan Almera G15 The main holding mechanism is hooks hooked onto floor bolts and top latches. Disassembly should begin with the release of the lower part.
Stand to the side of the back seat and try to lift the front edge of the cushion. You need to find the point where the plastic clip disengages from the body. This is usually done with a sharp but controlled upward movement. If the pillow does not budge, do not use excessive force; check that the additional latches are not closed.
- 🚗 Lift the front edge of the pillow up sharply
- 🔓 Push the freed part forward towards you
- 🛑 Assess the condition of the lower fastenings
Once the lower hooks are released, you need to remove the upper latches. They are located under the back edge of the pillow, closer to the back. Gently press down on the latch or pull the cushion up until it is completely separated from the body. Be careful as the pillow is heavy and may fall.
The main feature of the G15 mount is the presence of hidden bolts under plastic plugs on the floor, which must be unscrewed before complete removal. If you immediately try to remove the cushion without unscrewing the bolts, you may damage the floor or the mechanism itself.
⚠️ Attention: When lifting the cushion, be careful not to get your fingers caught between the metal seat frame and the car body.
- 5-10 minutes
- 15-20 minutes
- 30 minutes or more
- Haven't tried it
Removing the backrest of the rear sofa
After removing the pillow, access to the backrest fastening mechanisms opens. Backrest in Nissan Almera Attached to the body using bolts and plastic latches. The process requires greater care, since the back has a large area and weight, which increases the risk of damage to the upholstery or glass of the door.
First you need to find the mounting bolts, which are usually hidden under plastic covers or located in the upper part of the backrest, near the ceiling. Unscrew them with a 10 or 12 mm socket. Do not lose the washers and bolts as they will be needed for reassembly. If the bolts are rusty, use a penetrating lubricant.
- 🔩 Unscrew the upper backrest mounting bolts
- 🔓 Release the side latches
- 🛡️ Cover the back with a soft cloth before removing
Next you need to unfasten the lower backrest latches. They are located at the base where the backrest connects to the floor. Pull the backrest towards you and up, releasing them. If the backrest does not give way, check whether the seat belt mechanisms are blocked. Sometimes it is necessary to slightly rock the backrest to align the clamps.
☑️ The process of removing the backrest
When all fastenings are released, tilt the backrest forward and carefully remove it from the passenger compartment. It is better to do this together so as not to scratch the doorways or sides of the cabin. If you are working alone, be sure to hold the backrest with one hand while you remove it with the other.
What to do if the backrest cannot be removed?
If the backrest does not move, check whether the folding mechanism is blocked. Sometimes the fasteners become stuck due to dust or dirt. Try gently rocking the backrest while pressing on the release mechanism.
Features of fastening seat belts
Seat belts play a critical role in seat design and removal. IN Nissan Almera G15 The straps are attached to the backrest and cushion and if removed incorrectly may damage the buckles or the strap itself. Before removing the seats, be sure to check the condition of the belt fastenings.
Sometimes for complete dismantling it is necessary to unfasten the belt from the fastener on the seat. This is done by pressing the red button on the lock. Do not try to force the belt out if it does not come out. Check to see if the mechanism is stuck in the groove. Some modifications require unscrewing the belt base bolt.
| element | Mounting type | Tool | Features |
|---|---|---|---|
| Seat cushion | Hooks + bolts | Clip remover | Hidden bolts under plugs |
| Seat back | Bolts + latches | 10/12 mm wrench | Ceiling mount |
| Seat belt | Locking mechanism | Hand | Press the button |
| Plastic plugs | Velcro/clip | Screwdriver | Easily broken by brute force |
Pay special attention to the brackets on which the belts are attached. They are often made of fragile plastic or thin metal. When removing seats, make sure the belt hangs freely and is not tight. This will make it easier to remove the seat and prevent the mechanism from jamming.
Before removing the seats, take a photo of the location of the seat belts and bolts with your phone so that during assembly you do not confuse the installation order.
Transportation and storage of removed elements
Once you've removed the seats, the next question is how to store or transport them safely. The backrest and cushion take up a lot of space and you can't just throw them in the trunk unless it's empty. It is recommended to use soft covers or thick fabric to protect the upholstery from dust and dirt.
If you plan to transport the seats in another vehicle, pack them in large bags or boxes. Metal frames can scratch the body of another car. Make sure sharp corners and bolts are covered. This is especially important if you are removing seats for sale or repair.
- 📦 Pack the seats in protective covers
- 🚫 Do not place heavy objects on the seats
- 🧼 Store in a dry place without direct sunlight
When installing the seats back, make sure they are securely fastened. Check to see if there are any tools or debris left in the interior. The sound of the locks being fastened should be clear and loud. If the seat is loose, it means the fasteners are not fully engaged.
Proper packing of removed seats prevents damage to the upholstery and body of the vehicle during transportation.
Common mistakes when dismantling seats
Many owners Nissan Almera make typical mistakes when removing seats, which lead to additional costs. The most common problem is the use of brute force. Plastic clips are very fragile and break easily if used with the wrong amount of force. This causes the seat to rattle or not stay securely in place.
Another mistake is ignoring the bolts under the plugs. If you don't unscrew them and just pull on the seat, you could rip out part of the floor or damage the wiring. Always check for hidden fasteners before applying force. This will save you time and money on repairs.
It is also worth remembering the safety of belts. If you do not unfasten the belt, it may get stuck in the mechanism when you put it back. This will result in the belt not working correctly or having to be replaced. Always check the operation of the belts after assembling the interior.
What to do if the plastic retainer breaks?
If the retainer is broken, it can be replaced with a similar one from the donor or use universal clips. A temporary solution is to secure the seat with zip ties or wire, but this is not safe. It is better to immediately buy a new retainer.
FAQ: Answers to popular questions
Do I need to disconnect the battery before removing the seats?
No, for mechanical removal of seats on Nissan Almera G15 There is no need to disconnect the battery. However, if you plan to work on the under-seat airbag sensor wiring, turning off the power is mandatory.
How long does it take to remove all the rear seats?
If you have experience and the right tools, the process takes from 10 to 20 minutes. Beginners may need 30-40 minutes to carefully find all the fasteners and not damage the interior elements.
Is it possible to remove only one part of the pillow?
B Nissan Almera G15 The rear sofa cushion usually consists of two parts (a sliding part and a fixed part). They can be removed separately, since their fastenings are independent. This is convenient if you need to free up space on only one side.
What to do if the mounting bolts are rusty?
Treat the bolts with a penetrating lubricant (such as WD-40) and wait 10-15 minutes. Try gently rocking the bolt so that the lubricant penetrates the threads. Do not use excessive force to avoid stripping the threads.
How can I check that the seats are installed correctly?
Once installed, pull the seat up and forward. It should not move or make any extraneous sounds. Check the operation of the seat belts and folding mechanisms. The sound of the latches clicking should be clear.