Crossover owners Nissan Qashqai often face the need to increase the volume of the cargo compartment. The standard cabin configuration allows you to carry only small items, which can be inconvenient when transporting large cargo such as furniture or building materials. In such situations, the question arises of how to quickly and safely free up space without resorting to the services of a car service.
The process of removing the rear seats does not require special tools or deep technical knowledge, however, it has its own characteristics, depending on the year of manufacture of the car and the configuration. Owners Nissan Qashqai the first generation (J10) and the second generation (J11), it is necessary to take into account the differences in the fixation mechanisms of the pillows and backrests. Incorrect actions can lead to damage to the upholstery or fastenings, so it is important to act consistently and carefully.
In this article we will analyze in detail the algorithm of actions for various modifications, consider the types of fastenings and give practical advice that will help you avoid common mistakes. Proper dismantling will allow you to quickly transform the interior and vice versa, maintaining the aesthetic appearance of the interior and the serviceability of all components.
Interior preparation and necessary tools
Before starting any manipulations with the interior of the car, it is necessary to prepare the workspace. Make sure the rear doors are open and the trunk floor is clear and free of objects that could scratch the seat upholstery or become lodged under the locking mechanisms. To work, you will need a minimum set of tools, which every car enthusiast usually has.
The main tool for removing seat cushions is often a flat-head screwdriver or a special plastic removal wrench, which prevents damage to the plastic when prying the fasteners. In some trim levels Nissan Qashqai 10 or 12 mm sockets may be required to unscrew the mounting bolts if the car has been tuned or has non-standard underbody protection. A flashlight will also be useful to see the hidden fasteners under the upholstery.
- π§ Flat blade screwdriver or plastic spatula for removing latches
- π¦ Flashlight for illuminating hard-to-reach places under seats
- 𧀠Fabric gloves to protect hands from dirt and sharp metal edges
- π Tape measure or ruler to check the dimensions of free space
It is important to check the condition of the locks and latches before starting work. If the mechanism jams, do not use excessive force as this may cause the plastic to break. It is better to pre-treat the mechanism with penetrating lubricant and give it time to work.
Removing rear sofa cushions
The first step is always to remove the lower part of the seats, the so-called cushions. Mounting design in Nissan Qashqai J10 and J11 have their own characteristics, but the general principle remains similar. The pillow is fixed using two types of fastenings: front suspension and rear latches.
First you need to lift the rear edge of the seat cushion. In most cases, it is enough to pull the front part of the upholstery up with enough force to overcome the elasticity of the clamps. You will feel a characteristic click when the latches disengage from the body. Be careful not to tear the upholstery fabric if it becomes worn.
After releasing the rear clamps, it is necessary to detach the front part, which is attached to the metal body beam. A system of metal hooks is often used here, which must be carefully removed from the grooves. If the seat does not budge, check for additional bolts under the trim caps or floor mats.
- π Pull the front edge of the pillow up to release the rear latches
- βοΈ Carefully remove the front hooks from the metal grooves on the floor
- π¦ Immediately put the removed cushion in a safe place so as not to scratch the interior
If your vehicle has an Isofix system, the removal process may be a little more difficult due to the presence of metal brackets. In this case, it may be necessary to unscrew the bracket bolts, which will require the use of a socket. However, in standard configurations Nissan Qashqai The cushions can often be removed without unscrewing the bolts.
β οΈ Warning: Do not try to forcefully tear out the pillow if it does not give way. Check if the mechanism is blocked by the lock button or if it is caught by the mat. Violent use may cause deformation of the metal seat frame.
- J10 (first generation)
- J11 (second generation)
- J11 Facelift
- J12 (new generation)
Removing the rear seat backs
After removing the cushions, access to the backrest fastening mechanisms becomes free. The backs of the rear sofa in Nissan Qashqai usually divided into three parts: two side and central, which often serves as an armrest. Each part has its own locking mechanism, which may differ depending on the year of manufacture and level of equipment.
To remove the side backrests, you need to find the release levers or buttons located at the top of the seat or at the end of the backrest. Pressing the lever releases the upper lock, after which the backrest can be tilted forward. In some cases, a little force is required to disengage the lower hinges from the body.
The central part of the sofa, if it is a separate section, is removed in the same way. However, it often has additional fastenings in the form of bolts or studs hidden under plastic caps. Be sure to remove these plugs before unscrewing to avoid damaging them with a screwdriver. The bolts are usually 10 or 12 mm wrench size.
- π Press the release lever at the top of the backrest to release the lock
- π§ Unscrew the bolts securing the lower part of the backrest, if they are provided for in the design
- π Gently tilt the backrest forward and remove the lower loops from the grooves
Be extremely careful when disconnecting connectors.