Disassembling a laptop is a task that scares many users. Especially when it comes to dismantling the keyboard: fear of damaging the cable, breaking the latches or disrupting operation touchpad often stops you from doing your own repairs. However, in the case of network laptops DNS (brands Prestigio, Digma, Dexp, Irbis and others) the process of removing the keyboard is often simpler than that of premium models ASUS or Lenovo. The main thing is to know the nuances of the design and avoid common mistakes.

In this article we will figure out how to properly remove the keyboard on a laptop from a line DNSwithout damaging it or losing small parts. You will learn what tools you will need, how to determine the type of fastening (latches or screws), and what to do if the keyboard stops working after dismantling it. And also - unique tips for working with models where the cable is hidden under the battery or glued to the body.

Preparing for dismantling: tools and safety precautions

Before you start disassembling, make sure you have everything you need. For most laptops DNS The minimum set is enough, but some models (for example, Prestigio Gracebook or Digma EVE>) may require specific screwdrivers.

Here's what you'll definitely need:

  • 🔧 Plastic spatula (or mediator) - for separating latches without scratches.
  • ⚒️ Phillips screwdriver (usually PH0 or PH1) - for screws on the bottom cover.
  • 📏 Thin flathead screwdriver — for prying off the keys (if individual buttons need to be replaced).
  • 🧲 Magnetic mat or a container - so as not to lose screws and latches.
  • 🔍 Magnifying glass or flashlight — trains and small parts are often difficult to see.

Pay special attention static electricity. Touch the metal parts of the laptop case before use to remove the charge. If you are replacing the keyboard with a new one, do not remove the protective film from the cable until connected - it prevents oxidation of the contacts.

⚠️ Attention: If your laptop DNS It is under warranty; repairing it yourself will void it. In models Dexp Atlas And Irbis NB Seals on screws are often used - their damage will be noticeable at the service center.
📊 What tool do you already have for repairs?
  • Plastic spatula
  • Phillips screwdriver
  • Thin flathead screwdriver
  • Magnetic mat
  • None of the above

Determining the type of keyboard mount

Laptops DNS There are two main types of keyboard mounting:

  1. On latches (most budget models, for example, Prestigio Smartbook or Digma Linx).
  2. On screws (found in more expensive lines, such as Dexp Ursus or Irbis NB15).

To understand what type your model is, follow these steps:

  1. Turn the laptop over and inspect the bottom cover. If you see screws marked KB (keyboard) - they need to be unscrewed.
  2. Try to carefully pry the keyboard from the top edge (from the screen side) with a plastic spatula. If it gives in, fastening with latches.
  3. In models with backlit keyboard (For example, Digma EVE 15) both types of fastening are often combined.

If you're not sure, in 90% of cases, DNS laptops produced before 2022 have a latched keyboard, and new models (2023–2026) have screws under the bottom cover. The exception is ultrabooks Prestigio Gracebook, where the keyboard is glued to the case.

How to check laptop model DNS?

The model is usually indicated on a sticker under the battery or on the bottom cover. You can also look in the BIOS (while booting, hold F2 or Del) or in the system: Start → Settings → System → About.

Step-by-step instructions: remove the keyboard with latches

This method works for most laptops DNS budget and mid-range segment. The main rule is to act slowly and without sudden movements.

☑️ Preparing to remove the keyboard

Done: 0 / 5

Algorithm of actions:

  1. Turn off the power. Remove the battery (if removable) or disconnect the power plug and hold the power button for 10 seconds to discharge the capacitors.
  2. Pry up the keyboard. Start from the top edge (screen side). Insert a plastic spatula into the gap between the keyboard and the case and carefully move it left and right, releasing the latches. You will hear characteristic clicks.
  3. Lift up the keyboard. When all the latches along the top edge are released, lift the keyboard 30–45 degrees. Do not pull it towards you - the cable is still connected!
  4. Disconnect the cable. It is located under the keyboard, usually closer to the center. Gently pull the black plastic connector latch (up or to the side, depending on the model) and pull out the cable.

If the keyboard does not budge, do not force it. You may have missed a hidden latch or screw. In models Dexp Atlas 15 Sometimes there is an additional screw under the rubber feet - check them.

⚠️ Attention: In laptops Irbis NB14 And Irbis NB15 The keyboard cable runs under the metal touchpad screen. If you do not disconnect the touchpad first, you may break the cable when you lift the keyboard.

Features of removing the keyboard with screws

If your model requires screws to be removed (for example, Digma EVE 17 or Prestigio Gracebook 14), the process will be longer, but more reliable. The main difficulty is not to mix up the screws during reassembly.

Follow this order:

  1. Remove the bottom cover. Remove all screws (usually 8-12) and carefully pry the cover off with a plastic spatula, starting from the corner. In some models, the lid is held in place by additional latches - do not use force.
  2. Disconnect the battery. Even if it is non-removable, disconnect its cable from the motherboard. This will prevent short circuit.
  3. Locate the keyboard screws. They can be designated KB, KBD or just different in size. B Dexp Ursus The keyboard screws are shorter than the others.
  4. Unscrew the screws and remove the keyboard. After this, carefully lift it and disconnect the cable as described above.

The table below shows typical screw locations for popular models. DNS:

Laptop model Number of keyboard screws Location Features
Dexp Atlas 15 4 Under the bottom cover, marked KB One screw is hidden under the rubber foot
Prestigio Gracebook 14 6 5 under the cover, 1 under the battery The keyboard is glued around the perimeter
Digma EVE 17 5 Everything under the bottom cover The cable is secured with a metal latch
Irbis NB15 3 2 under the cover, 1 under the touchpad You need to remove the touchpad in front of the keyboard
💡

If the screws do not come out, do not apply force - they may have reverse threads (found in Chinese models). Try twisting the other way or use WD-40.

What should I do if the keyboard won't detach?

Sometimes even after all the latches are snapped off or the screws are unscrewed, the keyboard remains in place. The reasons may be different:

  • 🔌 Hidden latches. In models Digma Linx there are often additional latches on the sides, under the buttons F1–F12.
  • 🧴 Glue or double-sided tape. Found in ultrabooks Prestigio. Gently heat the edge of the keyboard with a hairdryer (not higher than 60°C) and pry it off with a spatula.
  • 🔧 Unscrewed screws. Check again - you may have missed a screw under the sticker or rubber foot.
  • 🖱️ The touchpad gets in the way. B Irbis NB The keyboard can be connected to the touchpad using a common cable - you need to disconnect both.

If the keyboard is stuck, use thread or guitar string for neat cutting of glue. Run it along the edge of the keyboard, pulling it lightly. After dismantling, remove any remaining adhesive with alcohol or acetone (do not use solvents - they will damage the plastic!).

⚠️ Attention: In laptops Dexp Ursus Pro The keyboard cable runs under the metal frame of the touchpad. If you don't remove the frame first, lifting the keyboard can tear the cable away from the motherboard.

Checking and connecting a new keyboard

After removing the old keyboard, inspect the cable and connector on the motherboard. If the contacts are oxidized or dirty, clean them eraser (for graphite contacts) or alcohol. Do not use metal objects - they will scratch the tracks.

When connecting a new keyboard:

  1. Carefully insert the cable into the connector until it stops. Make sure it is not twisted.
  2. Close the plastic latch (it should click).
  3. Lay the cable so that it does not bend or touch the fan or radiator.
  4. Secure the keyboard with latches or screws (depending on the model).

Before final assembly, turn on the laptop and test the keyboard operation. Press all keys including Fn, Win and function buttons (F1–F12). If some keys do not work, check:

  • The tightness of the cable in the connector.
  • Integrity of the cable (no kinks or breaks).
  • Correct connection (sometimes the cable is inserted upside down).
💡

If some keys do not work after replacing the keyboard, try updating the driver in Device Manager (section "Keyboards").

Common mistakes and how to avoid them

Even experienced users sometimes make mistakes when disassembling laptops DNS. Here are the most common:

  • 🔌 Damage to the cable. Do not pull on the cable - only grasp the plastic connector. In models Digma the trains are especially fragile.
  • 🔧 Lost screws. The screws are different lengths - if you mix them up, you can damage the motherboard. Store them in labeled containers.
  • 💥 Static electricity discharge. Touch the metal body of the laptop every 5-10 minutes of use.
  • 🔄 Incorrect assembly. Make sure all latches are latched and screws are tightened firmly but not overtightened.

If the laptop does not turn on after assembly, check:

  1. Connecting the battery (if disconnected).
  2. The tightness of the RAM and SSD (sometimes they come out of the slots during disassembly).
  3. The integrity of the keyboard cable - if it is damaged, the laptop may not start.

In models Prestigio Gracebook And Dexp Atlas Pro Sometimes the tamper protection works. If after assembly the laptop requires a BIOS password, contact a service center DNS - You won’t be able to reset it yourself.

FAQ: Frequently asked questions about removing the keyboard on DNS laptops

Is it possible to remove the keyboard without disconnecting the battery?

Technically yes, but it is highly discouraged. The battery can supply voltage to the motherboard even when turned off, which will lead to a short circuit when working with cables. The exception is models with a non-removable battery (for example, Digma EVE 15), where it is enough to disconnect the power plug and hold the power button for 15 seconds.

How to remove the keyboard Dexp Ursuswhat if the screws don't come out?

The screws in this model sometimes “stick” due to oxidation. Try:

  1. Drop onto the screw WD-40 or alcohol.
  2. Wait 5–10 minutes.
  3. Use a screwdriver with a magnetic tip.
  4. If that doesn’t help, gently heat the area around the screw with a hairdryer (no higher than 70°C).

Do not use force - the stripped screw may remain in the case and will be difficult to remove.

What should I do if the touchpad does not work after replacing the keyboard?

Most likely, you damaged or did not connect the touchpad cable. In models Irbis NB And Digma Linx The keyboard and touchpad often have a common cable. Disassemble the laptop again and check:

  • Connecting the touchpad cable to the motherboard.
  • Integrity of the cable (no kinks or breaks).
  • Correct installation of the touchpad - sometimes it is fixed with latches.

If the cable is damaged, it can be replaced (cost - from 300 to 800 rubles in service centers DNS).

How to clean the keyboard without removing it?

For surface cleaning:

  1. Turn off the laptop and disconnect the battery.
  2. Turn the laptop upside down at a 45° angle and gently tap the back cover to shake out any crumbs.
  3. Use compressed air cylinder (not a vacuum cleaner!) to blow out dust.
  4. Wipe the keys with a damp cloth with isopropyl alcohol (no more than 70%).

For deep cleaning (for example, from spilled liquid), removing the keyboard is necessary. If the liquid was recently introduced, immediately turn off the power and turn the laptop over to drain the liquid. Do not blow dry - it may melt the plastic!

Where to buy a replacement keyboard for a laptop DNS?

Purchase options:

  • Official service centers DNS. Guaranteed original part, but the price is higher than the market price.
  • AliExpress. Search by exact laptop model (for example, "Dexp Atlas 15 keyboard"). Price - from 800 to 2500 rubles, but delivery can take up to a month.
  • Local services. Many workshops sell used keyboards after repair (the price is 30–50% of a new one).
  • Avito/Yula. Check the seller's reviews and ask for a photo of the cable - it must be intact.

Before buying, compare a photo of the old keyboard with the new one - sometimes outwardly identical models have different cable connectors.