trunk Nissan Juke is one of those details that seems simple until it stops revealing itself at the most inopportune moment. Owners of this compact crossover often encounter problems: either the button on the key fob does not work, the lock gets stuck after washing, or the electronics malfunction due to a dead battery. In this article we will look at all possible ways to open the trunk - from standard to emergency, and we’ll also tell you how to fix typical problems without contacting service.

The material will be useful for both beginners who have just mastered their Juke, as well as experienced drivers who encounter unexpected failures. We took into account the features first (F15, 2010–2019) and second (F16, from 2019) generations, as well as hybrid versions. If your trunk refuses to open, don’t panic: in 90% of cases, the problem can be solved on your own in 5–15 minutes.

1. Standard methods of opening the trunk

Let's start with the basic methods that should work normally. There are three of them, and each has its own nuances depending on the configuration and year of manufacture Nissan Juke.

Method 1: Button on the key fob. On most versions (especially after 2014), the trunk opening button is placed on a separate key on the key fob - usually it is indicated by a trunk icon or inscription TRUNK. Press it once and the lock should click. If there is no reaction:

  • 🔋 Check the battery charge in the key fob - even when discharged, it can open the doors, but not the trunk.
  • 📶 Make sure you are within range of the signal (usually up to 5-10 meters from the car).
  • 🔄 Try pressing the button twice with an interval of 1 second - sometimes it works when the signal is weak.

Method 2: Button on the tailgate. On Juke first generation (2010–2019) there is a hidden button under the trunk handle - you need to press it simultaneously with pressing the handle itself. On the second generation (from 2019), the button can be touch or mechanical, depending on the configuration. If the button does not respond:

  • 🧼 Clean it of dirt - often contacts oxidize after winter use.
  • 💧 Check if moisture has gotten under the seal (relevant after washing).
  • 🔧 If the button is recessed too deep, try pressing it with a pencil or key.

Method 3: Lever from the interior. Next to the driver's seat (usually on the left under the steering wheel or on the floor on the door side) there is a mechanical lever with a trunk icon. Pull it towards you and the lock will open. If the lever does not work:

  • 🔗 Check if the drive cable is broken (a common problem after 100,000 km).
  • 🛠️ Lubricate the cable with silicone grease if it is tight.
📊 Which method of opening the trunk do you use more often?
  • Button on key fob
  • Button on the trunk door
  • Lever from interior
  • Another way

2. Emergency trunk opening without a key

Situations when the trunk needs to be opened urgently, and standard methods do not work, happen less frequently, but they are the most stressful. For example, the battery is dead, the key fob is broken, or the lock is jammed after an accident. Here three reliable ways for such cases.

Method 1: Through the back seat. In the majority Nissan Juke (except for versions with a panoramic roof) the rear seat folds down to provide access to the trunk. Algorithm:

  1. Open the front door (if the battery is dead, use the mechanical key).
  2. Fold down the rear seatback - the levers are usually located on the sides under the cushions.
  3. Get into the trunk and manually press the inside release button (it's on the lock).

Method 2: Through the fuel filler flap. This method is suitable for Juke first generation. Under the fuel filler flap there is access to the trunk emergency release cable. You will need:

  • 🔧 Screwdriver with a flat tip.
  • 🕳️ Flashlight (to see the cable).

Remove the hatch cover, pry up the plastic protection and pull the orange cable (it is usually attached to the trunk lock).

Method 3: Disassembling the door trim. A last resort if other methods have not helped. You will need:

  1. Remove the plastic trim on the trunk door (it is secured with clips).
  2. Find the lock mechanism and manually move the latch with a screwdriver.
💡

If the trunk opens but the lock continues to malfunction, lubricate it WD-40 or graphite lubricant. Don't use oil - it collects dust!

3. Common problems and their solutions

trunk Nissan Juke may fail for many reasons - from a banal battery discharge to a breakdown of the electric drive. We have collected TOP-5 faults and ways to eliminate them.

Problem Possible reason Solution
The key fob doesn't open the trunk, but it does open the doors. Weak signal, low battery, synchronization failure Replace the battery, reprogram the key fob (instructions in the manual)
The trunk button does not press The mechanism is jammed and dirt has entered Clean the button, lubricate the mechanism with silicone grease
The electric lock buzzes but doesn't open. Worn gears, broken cable Replace the drive or cable (part no. 28510-4M00A for F15)
The trunk opens but does not close Problems with the microswitch, the latch is stuck Adjust latch position or replace microswitch
Trunk won't open after washing Water has entered the electrical wiring or lock Dry with a hairdryer, lubricate the contacts CRC

If the problem is related to electrician (for example, the button on the key fob does not work, but the lever from the passenger compartment works), check the fuse F37 (10A) in the block under the steering wheel. He is responsible for the trunk lock chain. Also inspect the wires running from the trunk to the body - they often fray in the corrugation.

What should I do if the trunk has opened, but does not lock in the open position?

This is a sign of wear on the gas struts (shock absorbers). Replace them with a pair - art. 58501-4M000 for left and 58502-4M000 for the right (for F15).

4. Features of opening the trunk on Nissan Juke second generation (F16)

Models from 2019 have received an updated lock mechanism and an electronic control system. There are a few key differences here:

1. Keyless entry. On versions with Nissan Intelligent Key the trunk can be opened by simply sliding your foot under the rear bumper (function Easy Fill Alert). If the sensor does not work:

  • 📱 Check if the function is enabled in the menu Settings → Access → Contactless trunk opening.
  • 🔄 Reboot the system by removing the key from the operating area for 30 seconds.

2. Electronic lock. On Juke F16 The trunk can be locked automatically at speeds above 5 km/h. If it does not open after stopping:

  • 🚗 Make sure the car is in neutral or park (automatic).
  • 🔋 Check the voltage of the on-board network - if it drops below 11.5V, the electronics become faulty.

3. Touch button. On some trim levels the trunk release button is touch sensitive. If she doesn't respond:

  • 🧴 Wipe it with alcohol - greasy marks interfere with operation.
  • ⚡ Reset the button settings via the diagnostic connector (scanner required Consult-III).

☑️ Diagnosis of trunk faults on Juke F16

Done: 0 / 4

5. How to prevent trunk lock problems

Most lock failures Nissan Juke can be prevented with simple preventive measures. Here 5 rules, which will prolong the life of the mechanism:

1. Regular lubrication. Every 6 months (or before winter) lubricate:

  • 🔑 Lock and latch - with silicone grease.
  • 🔗 Drive cable with graphite lubricant.
  • 🔧 Trunk hinges - Litolom-24.

2. Moisture protection. After washing:

  • 🚿 Dry the lock with compressed air (for example, a wheel compressor).
  • 🛡️ Apply to seals tar or wax for protection against corrosion.

3. Careful operation:

  • 🚫 Do not slam the trunk - this will deform the latch.
  • 🛑 Do not load the trunk lid (do not sit on it, do not place heavy objects).

4. Electronics check:

  • 🔋 Check the battery voltage once a year - drawdowns are destructive for the electric drive.
  • 🔌 Inspect the wiring connectors for oxidation (especially in the corrugation between the trunk and the body).

5. Diagnostics at the first sign of a malfunction:

  • 🔊 If the lock starts to creak or is difficult to open, lubricate it without waiting for a breakdown.
  • ⚡ If the electronics malfunction (for example, the trunk opens spontaneously), check BCM block (Body Control Module).
💡

The most common cause of trunk lock failure on a Juke is lack of prevention. Regular lubrication and moisture protection prevent 80% of malfunctions.

6. When you can’t do without a service

Some breakdowns require professional intervention. Contact the service if:

1. The electric lock drive is broken. If you hear the motor whirring, but the trunk does not open, the gears are most likely worn out or the drive motor is burnt out. Replacing it yourself without experience can damage the wiring..

2. Problems with the BCM. If the trunk opens chaotically or does not respond to commands, a malfunction may be to blame. Body Control Module. For diagnostics you need a scanner Consult-III or Launch X431.

3. The emergency opening cable is damaged. If the cable is torn or jammed, replacing it requires disassembling the trunk trim. Without experience, you can damage the plastic clips.

4. Latch or hinges are deformed. After an accident or careless operation, it may be necessary to straighten or replace body parts.

⚠️ Attention: If the trunk opens but does not lock in the closed position, do not operate the vehicle! This may damage the trunk lid while driving.

7. Frequently asked questions (FAQ)

Is it possible to open the trunk Nissan Juke without a key if the battery is dead?

Yes. Use the mechanical key to open the driver's door, then fold down the rear seat and access the trunk latch from inside. An alternative is an emergency cable through the fuel filler flap (F15 only).

Why does the trunk open by itself?

The reasons may be different:

  • 🔋 Voltage drop in the on-board network (check the battery).
  • 🤖 Failure in the BCM unit (reflashing required).
  • 🔑 Faulty key fob or proximity sensor (on F16).

Start by checking the battery and fuse F37.

How to lubricate the trunk lock without removing the trim?

Use silicone lubricant in a bottle with a straw. Insert the tube into the keyhole and spray the product while opening/closing the lock with the key. For the drive cable, lubricate its entry point into the trunk (it is visible when the lid is open).

What to do if the trunk is jammed after washing?

Most likely, water got into the electric drive or contacts. Proceed like this:

  1. Dry the lock with a hairdryer (not hot air!).
  2. Spray into the mechanism WD-40 or CRC to displace moisture.
  3. If this does not help, remove the casing and dry the wiring.
Is the trunk lock suitable for Nissan Qashqai on Juke?

No, the locks are not interchangeable. U Juke first generation (F15) original art. castle - 80910-4M000, for the second (F16) - 80910-4M100. Castles from Qashqai or Micra The mounts and connectors will not fit.

⚠️ Attention: When replacing the trunk lock with Juke F16 It may need to be programmed via a diagnostic scanner. Without this, the contactless opening function will not work.