How to open the trunk on a Nissan Juke: step-by-step instructions for all generations

Nissan Juke is a compact crossover with a unique design, but its trunk sometimes baffles owners. Especially when it comes to models with electric drive or after replacing the battery. In this article we will look at all possible ways to open the trunk, including emergency ones, as well as typical problems and their solutions.

Regardless of whether you are faced with jammed lock, low battery, or just don't know where the hidden button is - here you will find the answer. We have analyzed the instructions for Juke F15 (2010–2019) and Juke F16 (2019–present), and also took into account the nuances of configurations with with a blank key and keyless entry.

1. Standard methods of opening the trunk

Let's start with the basic methods that work 90% of the time. They can be divided into three categories: using the key, a button on the remote control and a lever in the cabin.

Method 1: Button on the remote control. On most versions Nissan Juke The trunk opens by long pressing (2–3 seconds) on the button with the image of the trunk. On some remotes (for example, for models 2010–2014), this button is combined with the door unlock button - you need to press it twice with an interval of less than 1 second.

• 🔑 For keys with retractable blade: Press the trunk button while holding the remote with the blade facing up.
• 📶 For keyless entry (Intelligent Key): Bring the remote control to the back of the car (within a 1 meter radius) and press the button.
• ⚡ If it doesn't work: Check the battery in the remote control (type CR2032) or reboot the system by removing the fuse F37 (10A) for 10 seconds.

Method 2: Lever in the cabin. Next to the driver's seat, to the left of the pedals, there is a mechanical trunk release lever. On Juke F16 (2019+) it can be hidden by a plastic plug - you need to pry it off with a screwdriver. The lever only operates when ignition on or in position ACC.

Method 3: Dummy key. In versions without electric drive (for example, basic version Visia) the trunk can only be opened mechanically. Insert the key into the lock on the trunk door (located under the handle) and turn it counterclockwise. If the key does not turn, spray the lock WD-40 and try again in 5 minutes.

2. Emergency trunk opening

If standard methods do not work, you will have to use backup options. They will come in handy when the battery is low, the electric drive is broken, or the key is lost.

Method 1: Through the interior (seats folded). Fold back the rear row of seats (the levers are located at the base of the backrests) and crawl into the trunk. Under the trim on the right you will find emergency rope red or orange - pull it down. On Juke F15 the cable can be hidden under a plastic panel - it needs to be removed by snapping 4 clips.

Method 2: Through the fuel filler flap. This method is suitable for models with mechanical trunk lock. Remove the gas tank cap, stick your hand into the niche and feel for the emergency release cable (usually it is attached to a metal bracket). Pull it towards you with force.

⚠️ Attention: Do not use this method if the trunk is blocked due to activated alarm - this may trigger an alarm. First disable it through the menu on the dashboard (Settings → Security → Alarm).

• 🔧 For Juke with electric drive: If the trunk does not open after replacing the battery, reset the error via the diagnostic connector OBD-II (need a scanner type ELM327).
• 🚗 If the lock is jammed: Try opening the trunk by simultaneously pressing the button on the remote control and pulling the handle up and down.

3. Features of opening the trunk on different generations of Juke

The design of the trunk differs depending on the year of manufacture and configuration. Let's look at the key nuances for each generation.

Model	Lock type	Opening methods	Typical problems
Juke F15 (2010–2014)	Mechanical + electric drive (optional)	Key, button on the remote control, lever in the cabin	Oxidation of contacts in the lock, wear of the cable
Juke F15 (2015–2019)	Electric drive (standard)	Remote control, interior button, emergency cable	Failures after replacing the battery, motor jamming
Juke F16 (2019–2022)	Electric drive + keyless entry	Remote control, touch button on the door, lever in the cabin	Problems with the closing sensor, error B210E
Juke F16 (2023+)	Electric drive + function Easy Fill	Remote control, voice command (with NissanConnect), lever	Synchronization failures with the remote control, lock freezing

On Juke F16 with the system ProPILOT The trunk can be opened with a voice command: say "Open the trunk" after activating the voice assistant (button on the steering wheel). The function only works when the ignition is on and the smartphone is connected via NissanConnect.

On 2020+ models, if the battery is discharged, the emergency cable may be blocked by the solenoid - in this case, you will need to apply power to the trunk terminals (12V) or use an external source.

How to reset the electric trunk error?

If the indicator lights up after opening the trunk Check Baggage Door, perform a reset: 1) Close the trunk manually; 2) Turn on the ignition; 3) Press the open button on the remote control 5 times in a row with an interval of 1 second; 4) Turn off the ignition. The error should disappear.

4. Common problems and their solutions

Owners Nissan Juke often encounter typical trunk malfunctions. Here are the most common of them and how to eliminate them:

• 🔋 Trunk won't open after replacing battery: Reset the electronics by disconnecting the terminals for 15 minutes. If that doesn't help, re-register the keys using the diagnostic scanner.
• ❄️ Castle frozen in winter: Heat the key with a lighter (do not overheat!) and insert it into the lock. An alternative is to use a lock defroster (LIQUI MOLY).
• 🔌 The button on the remote control does not work: Check the fuse F22 (15A) in the block under the hood. If it is working, reprogram the remote control (instructions in section 5).
• 🚪 The trunk opens spontaneously: The culprit is usually a closing sensor or a worn latch. Replace the microswitch (Nissan 28510-4M00A).

Error B210E (trunk drive malfunction) appears on Juke F16 if the wiring is broken or the motor fails. For diagnostics:

1. Connect the scanner to the connector OBD-II.
2. Check the voltage at the contacts 12 (blue) And 13 (red) drive connector (must be 12V).
3. If there is voltage, but the trunk does not open, replace the motor (Nissan 28500-JK00A).

⚠️ Attention: If the trunk opens but does not close, do not try to close it by force - this may break the guides. Turn off the fuse instead F37 and close the door manually, then reset the error through the menu Settings → Diagnostics.

5. Programming the remote control and resetting settings

If the trunk release button on the remote control has stopped working, the connection with the car may have been reset. To reprogram the remote:

1. Close all doors and trunk.
2. Insert the key into the ignition and turn to position ON (don't start the car).
3. Within 5 seconds, press the trunk release button on the remote control 6 times.
4. Turn off the ignition and remove the key. The remote control should synchronize (the LED will flash).

For Juke F16 with the system Intelligent Key the procedure is different:

1. Get into the car and close all the doors.
2. Click the button LOCK on the remote control 3 times in a row.
3. Insert the key into the ignition and turn to ON, then back to OFF (repeat 6 times in 10 seconds).
4. Press any button on the remote control and an alarm should sound.

If programming fails, check:

• 🔋 The battery in the remote control is charged (replace with a new one) CR2032).
• 📡 Presence of interference from other electronic devices (for example, contactless tags).
• 🔧 Integrity of the receiver antenna (located under the trunk trim).

6. Modernization and tuning of the trunk lock

Many owners Nissan Juke are faced with the inconvenience of a standard trunk lock. Let's look at popular improvements:

• 🔄 Electric drive installation: For mechanical versions, a kit can be installed Nissan 28500-JK00A (about 15,000 ₽). You will need to run wires from the door control unit and set up synchronization with the alarm.
• 🔑 Keyless entry: Module Keyless Go (For example, StarLine B94) allows you to open the trunk by approaching your foot to the bumper (function Kick-to-Open). Installation cost - from 20,000 ₽.
• 📱 Smartphone control: Using module NissanConnect or third party solutions (Pandora DXL 4700) the trunk can be opened via the application. Requires connection to CAN bus.

Before upgrading, please note:

• 🔧 Any interference with the electrical system can lead to loss of warranty (if the car is under warranty).
• ⚡ Poor installation often becomes the reason short circuit or malfunctions of standard electronics.
• 📋 To legalize changes in the traffic police you will need declaration of amendments.

The most budget tuning — Installation of an additional trunk opening button in the cabin. For example, you can connect a button from Toyota (84810-30010) to the wires of the standard lever. Connection diagram:

Кнопка (контакт 1) → Провод "Открытие" (синий с чёрной полосой)
Кнопка (контакт 2) → Масса (чёрный провод)

7. Tips for care and prevention

To avoid trunk problems Nissan Juke, follow these simple guidelines:

• 🧴 Lock lubrication: Once every six months, treat the lock mechanism with silicone grease (CRC 5-56). Do not use graphite lubricant - it attracts dust.
• 🔋 Battery: When replacing the battery, disconnect it for no more than 30 minutes, otherwise the electronics settings will be reset. Use batteries with a capacity of at least 60 Ah (recommendation Nissan).
• 🚿 Washing: Avoid getting water under the trunk seals. After washing, dry the lock with compressed air.
• ❄️ Winter operation: Before frost, treat the seals with glycerin and the lock with a defroster. Do not use hot water for defrosting!

If the trunk begins to open with a delay or makes squeaking noises, check:

• 🔩 Loops: Tighten the mounting bolts (M8) and lubricate the hinges with lithium grease.
• 🔗 Emergency opening cable: Make sure it is not pinched or worn. Replacing the cable will cost 1,500–2,000 rubles.
• 📶 Remote control antenna: It is located in the rear bumper. Check its integrity with a multimeter (resistance should be 50–70 Ohms).

FAQ: Frequently asked questions

Is it possible to open the trunk if the battery is dead?

Yes, but the method depends on the model:

• On Juke F15 with a mechanical lock - use a key.
• On Juke F16 with electric drive - connect the external battery to the terminals in the engine compartment (red on +, black on –) and press the button on the remote control.

If the battery is completely discharged, you will have to use the emergency cable through the passenger compartment.

Why does the trunk open by itself?

Reasons:

1. The microswitch in the lock is faulty (Nissan 28510-4M00A).
2. Problems with the door control unit (BCM).
3. Interference from other electronic devices (such as proximity tags).

Solution: Use a scanner to check for errors. B210E or B210F. If there are no errors, check the wiring from the lock to BCM.

How to open the trunk if the key is lost?

Options:

• Use a spare key (if available).
• Contact service Nissan to make a duplicate (a PTS is required).
• If there is no key, you will have to open the trunk through the passenger compartment (folding the seats) or the fuel filler flap.

The cost of making a new key with a chip is from 8,000 to 15,000 rubles.

What should I do if the trunk opens but does not close?

Procedure:

1. Check if there is a foreign object (such as a bag or wires) in the way.
2. Close the trunk manually and hold the handle closed for 5 seconds.
3. If that doesn't help, turn off the fuse. F37 (10A) for 10 seconds, then try again.

If the problem persists, the microswitch or drive motor needs to be replaced.

Is it possible to install a power trunk on a manual version?

Yes, but you will need:

• Electric drive kit (Nissan 28500-JK00A).
• Wires for connecting to the control unit (BCM).
• Setting via diagnostic scanner (for example, Launch X431).

The cost of service work is from 10,000 ₽. Self-installation is possible, but requires skills in working with auto electricians.