Car Nissan Note is a reliable compact hatchback that requires regular maintenance to maintain a comfortable climate in the cabin. One of the key procedures is replacement cabin filter, which is responsible for cleaning the incoming air from dust, pollen and exhaust gases. Many owners encounter difficulties trying to find this element, since the manufacturer does not always make it available for quick replacement without dismantling unnecessary parts.
The location of the filter element directly depends on the generation of the car and the year of manufacture. In older versions, access may be somewhat difficult, while in more recent versions, engineers have paid more attention to maintenance. Understanding that where is the cabin filter located, will allow you to save money on car service services and do the procedure yourself, simply following the logic of the front panel design.
Design features and filter location by generation
For owners Nissan Note first generation (E11 body), the situation with the location of the filter has its own nuances. In most trim levels, this element is hidden behind the glove box (glove compartment), but access to it is not always direct. It is often necessary to completely remove or loosen the storage compartment to gain a view of the heater housing.
In second-generation cars (E12 body), the location remained similar, but the design of the glove compartment mounting may have changed. Here the filter is located in a niche behind the right side of the dashboard. It is important to note that in some rare trim levels or for markets with special climatic conditions, access can be achieved through a cover on the left side, but this is rather an exception to the rule for this model.
It must be taken into account that cabin filter in Nissan Note often installed in a horizontal or inclined position inside a plastic casing. This means that you will have to follow the guides along which the element should slide during installation. If you can't see the filter right away, it may be covered with a protective cover that you simply need to snap off.
Tools and preparation for the replacement procedure
Before you start searching and extracting a filter, prepare a minimum set of tools. Typically, to access the filter on Nissan Note no complex tool arsenal is required; it is enough to have a Phillips screwdriver and, possibly, a plastic spatula on hand to carefully release the latches.
You will also need new supplies. When choosing, pay attention to the type of filter: carbon or regular paper. The coal version better retains odors and harmful gases, which is important when driving in city traffic. A regular filter does an excellent job of removing large particles of dust and pollen.
- 🛠️ Phillips screwdriver (PH2) for unscrewing the glove box mounting screws.
- 🧤 Clean gloves so as not to get your hands dirty from a dirty filter or dust in a niche.
- 🌬️ New filter to match your specifications Nissan Note.
- 💡 Flashlight, since the lighting in the niche behind the glove compartment is often insufficient.
Make sure the vehicle is on a level surface and the parking brake is set. This will prevent accidental movement of the machine during operation. It is also recommended to turn off the ignition to avoid accidentally turning on the heater fan, which could create discomfort or interfere with the removal of the old element.
⚠️ Attention! Do not use excessive force when removing the plastic panel components. Plastic on Nissan Note quite fragile in the places where the latches are attached, and if handled carelessly, they can break, which will lead to squeaks in the future.
- Charcoal (black)
- Regular (white/gray)
- Combined
- Never changed
Step-by-step instructions for accessing the filter
The process begins with freeing up space in front of the passenger seat. Open the glove box and remove all contents. This is not only for convenience, but also to prevent objects from falling into the engine compartment or under the panel if you accidentally drop a propeller.
Next you need to empty the glove compartment itself. On Nissan Note This is done by unscrewing several screws located around the perimeter of the internal opening of the compartment. Often the screws are hidden under decorative plugs or located at the bottom. Unscrew them and gently pull the glove compartment towards you until it comes out of the grooves.
After dismantling the box, you will see a plastic casing covering the ventilation duct. This housing is usually held in place by plastic clips or a single screw. Open the casing cover by pressing the latches. Inside you will find cabin filter, which can be contaminated to the point where it no longer allows air to pass through.
☑️ Preparation for replacement
Remove the old filter, remembering or photographing the direction in which it was installed (airflow arrow). This is critical for the proper operation of the ventilation system. If you install the new element backwards, the air flow may be blocked or the filter will quickly become unusable.
What to do if the glove compartment cannot be removed?
Sometimes the screws are hidden under decorative plugs that need to be pryed off with a thin screwdriver. Also check that the glove compartment is not blocked by the stopper on the right side, which must be moved to the side before removal.
⚠️ Attention! If the filter is installed too tightly, do not try to force it out. Use a flashlight to find the gap and carefully pry it open with a flathead screwdriver wrapped in cloth to avoid scratching the plastic of the case.
Technical characteristics and filter selection
When choosing an analogue for Nissan Note It is important to focus on the exact dimensions of the case. The standard dimensions of the filter element for most Nissan models are about 240x190 mm, but always check the markings on the old filter or in the spare parts catalog. Using the wrong size element will cause it to dangle or not fit into the grooves.
The table below shows popular articles and manufacturers that are suitable for E11 and E12 bodies. Please note that original spare parts are usually more expensive, but provide guaranteed filtration quality and a tight fit.
| Manufacturer | Article (example) | Filter type | Features |
|---|---|---|---|
| Nissan (Original) | 27277-3XJ0A | Coal | High degree of purification, original fit |
| MAHLE | LAK 520 | Coal | German quality standard, durability |
| MAN-FILTER | CUK 2700 | Coal | Excellent odor filtration, affordable price |
| KNECHT | LA 520 | Regular | Basic dust protection, economy option |
| SCT | SM 120 | Regular/Coal | Good value for money |
You should not save on your health by choosing the cheapest analogue of an unknown brand. Cheap filters often have poor-quality impregnation, which can begin to crumble and enter the cabin along with air. In addition, the thin cardboard of the case may not withstand the pressure difference and become deformed, allowing unfiltered air to bypass the material.
Installing a new element and checking operation
After you have removed the old filter, be sure to wipe the inside of the housing from dust and debris. Use a vacuum cleaner or just a crumpled rag. Dirt left inside can clog the new filter faster than it would in a clean housing and impair airflow.
Insert the new element strictly in the direction of air flow. Usually on the filter housing there is an arrow with the inscription AIR FLOW or UP, which must coincide with the direction of air movement in the ventilation system. For Nissan Note The arrow should most often point down or towards the engine shield, but it is better to double-check this visually.
Carefully push the filter into the slots until it stops. Make sure it fits snugly and does not protrude beyond the edges of the case. After this, close the protective cover and secure it with the latches. Reinstall the glove box, tighten the screws and close it.
Before complete assembly, turn on the ignition and check the operation of the fan at different speeds. If you hear a whistling or howling sound, the filter may be installed crookedly and blocking part of the flow.
Start the engine and check the operation of the heating and air conditioning system. The fan should operate silently, and the air flow from the deflectors should be strong and uniform. If you notice a decrease in performance, double-check that the filter is installed correctly and the seals are intact.
Correct installation of the filter along the air flow arrow is the key to efficient operation of the stove and the absence of extraneous noise in the ventilation system.
Frequent errors and operating tips
Many owners Nissan Note make the mistake of ignoring the regularity of filter replacement. In conditions of dusty roads or high concentrations of allergens (for example, in spring), the element needs to be changed every 10,000–15,000 km. If you operate a car in a metropolis with poor air quality, the interval should be reduced to 7,000–10,000 km.
Another common mistake is trying to wash and dry the old filter. This is unacceptable, since the structure of the material (especially coal) is irreversibly destroyed when wet. A washed filter loses its adsorption properties and turns into a breeding ground for bacteria and mold.
- ❌ It is prohibited to use compressed air to clean the filter - this will damage the fibers.
- ❌ Do not place the filter “back to front”, even if it physically fits.
- ❌ Avoid buying filters without packaging or with damaged labeling.
Timely replacement cabin filter is not only a matter of comfort, but also of safety. A clogged filter creates excess pressure in the system, which can lead to overheating of the stove fan and its failure. Repairing a stove motor is much more expensive than buying a new consumable.
⚠️ Attention! If after replacing the filter you still feel an unpleasant odor in the cabin, the problem may not be in the filter, but in the air conditioner evaporator, which requires professional dry cleaning.
FAQ: Answers to frequently asked questions
Do I need to remove the battery before replacing the filter?
No, in Nissan Note Replacing the cabin filter does not require disconnecting the battery. All work is carried out in the cabin, and the electrical system is not involved in the process of dismantling the glove compartment and filter.
How long does it take to replace a filter?
For a beginner, the procedure will take about 15-20 minutes, including preparation and cleanup. An experienced craftsman can do it in 5–10 minutes, as he knows the location of all the screws and latches.
Is it possible to install a larger filter?
No, using a larger filter is not possible due to the design of the housing. A smaller filter is also unacceptable, as this will create gaps through which untreated air will enter the cabin.
How do you know when it's time to change the filter?
The main signs: a decrease in the intensity of air flow from the deflectors, the appearance of foreign odors, fogging of the windows and the presence of dust on the instrument panel when the heater is on.
Where to buy an original filter for Nissan Note?
Original spare parts can be purchased from official dealers Nissan, in large online auto parts stores or in specialized Japanese car stores. Always check the item number before purchasing.