Nissan Almera N16 is a popular sedan that is still actively used on the roads of the CIS. One of the weak points of the model is the rear lights: over time, they become cloudy, crack, or stop working due to oxidation of the contacts. In this article, we will look at everything the owner needs to know: from choosing original and non-original spare parts to step-by-step replacement and repair.

Tail lights on Almera N16 (2000–2006) not only perform a signaling function, but also affect the appearance of the car. Problems with them can result in a fine from the traffic police or an accident due to an incorrect alarm. We have collected up-to-date information on article numbers, compatibility, typical malfunctions and methods for eliminating them - so that you can solve the problem yourself without overpaying for car service services.

Original and non-original taillights: articles and prices

Original tail lights for Nissan Almera N16 are produced under the brand Nissan and have article numbers depending on the installation side:

  • 🔴 Left light: 26400-4M000 (original), 26400-4M001 (restyled version after 2003)
  • 🟡 Right light: 26410-4M000 (original), 26410-4M001 (restyling)

The cost of original lanterns varies from 8,000 to 12,000 rubles per piece, which makes their purchase not always advisable. The market offers high-quality analogues from manufacturers:

  • 🔹 Depo (articles 316-1901-L And 316-1901-R) - a budget option (~3,500–4,500 rubles), but with less durable plastic.
  • 🔹 TYC (11-6208-00-1 And 11-6208-00-2) - middle price segment (~5,000–6,000 rubles), good build quality.
  • 🔹 Hella (1FH 008 109-041 And 1FH 008 108-041) is a premium analogue (~7,000–9,000 rubles), close to the original in terms of characteristics.
Manufacturer Article (left/right) Price, rub. Features
Nissan (original) 26400-4M000 / 26410-4M000 8 000–12 000 12 month warranty, precise fit
Depo 316-1901-L / 316-1901-R 3 500–4 500 Turns cloudy after 2–3 years, brittle plastic
TYC 11-6208-00-1 / 11-6208-00-2 5 000–6 000 Good sealing, average service life
Hella 1FH 008 109-041 / 1FH 008 108-041 7 000–9 000 UV resistant, durable

Important: the lights for the restyled version (after 2003) have a modified shape of the brake light reflector. Make sure the part number matches the year of your car!

📊 What lights do you have installed on your Almera N16?
  • Original Nissan
  • Depo's analogs
  • Analogs TYC
  • Hella's analogs
  • Others/Don't know

Typical rear light malfunctions and their causes

Tail lights on Almera N16 are subject to several characteristic problems. Let's look at them in more detail:

  • 💡 Lamp burnout - the most common malfunction. Brake light bulbs are particularly affected (P21/5W) and dimensions (W5W) due to vibrations and power surges.
  • 🌧️ Fogging - a sign of a leak. Most often, cracks in the housing or a worn seal are to blame.
  • 🔌 Oxidation of contacts — leads to flickering or complete failure of the flashlight. Typical for cars over 10 years old.
  • 🔥 Melting plastic — occurs when installing high-power lamps (for example, LED without resistors).

One of the most insidious problems is contact group corrosion inside the lantern. Owners often confuse it with a burnt-out lamp, although the real reason lies in the oxidized traces of the board. This can only be diagnosed after disassembling the flashlight.

⚠️ Attention: If after replacing the lamp the flashlight still does not work, do not rush to buy a new one! In 60% of cases, the problem is solved by cleaning the contacts on the board or replacing the socket.

Another common situation is only one function does not work (for example, brake light or turn signal). This is usually due to a broken track on the board or a burnt out resistor. In such cases, the flashlight can be repaired without buying a new one.

💡

Before purchasing a new flashlight, check the voltage at the connector using a multimeter. Often the problem lies in the wiring, and not in the unit itself!

Step-by-step instructions for replacing a tail light

Replacing the rear light with Nissan Almera N16 does not require special skills, but there are several nuances. You will need:

  • 🔧 Phillips screwdriver (size PH2)
  • 🔧 Plastic puller or flat screwdriver (for removing clips)
  • 🔧 New flashlight or lamps (if replacement is required)
  • 🔧 Silicone grease (for seal)

Step 1: Power off

Open the trunk and disconnect the negative terminal of the battery. This will prevent short circuits when working with the wiring. If you're just replacing the lamp, you can get by without turning it off, but be careful!

Step 2: Removing the trunk trim

On the right or left side (depending on the light you are replacing), locate the plastic plug next to the light. Carefully pry it up with a flathead screwdriver and remove it. Under the plug you will see two screws that need to be removed.

Step 3. Disconnecting the connector

After removing the screws, pull the flashlight towards you - it should come out of the grooves. Don't try too hard! At the back of the flashlight there is a connector with wires. Press the latch and disconnect it.

Battery terminal removed|

Removed items from trunk|

New lamps/lantern prepared|

The integrity of the seal has been checked -->

Step 4. Installing a new light

If you are replacing the entire flashlight, connect the connector to the new block, insert it into the grooves and secure it with screws. If only the lamp, remove the old one (turn it counterclockwise), install a new one and check operation.

⚠️ Attention: When installing LED lamps The brake light or turn signal may trigger an error on the dashboard. To solve the problem you will need to install load resistors or stationery resistance blocks.
💡

Before final assembly, turn on the ignition and check all functions of the light: dimensions, brake light, turn signal and reverse. This will save time on re-disassembly!

Tail light repair: when is it possible?

You don't always need to buy a new flashlight - many problems can be fixed on your own. Let's look at the most common cases:

  • 🔧 Fogging - can be eliminated by sealing cracks with silicone sealant (ABRO or Permatex) and replacing the rubber seal.
  • 💥 Cracks on the body — minor damage can be repaired with epoxy resin or a soldering iron (for plastic). Large cracks are a reason for replacement.
  • 🔌 Oxidation of contacts — the flashlight board can be cleaned with alcohol or a special cleaner (Contact Cleaner), and then coat the contacts with protective varnish.
  • 🔥 Cartridge melting — requires replacement of the cartridge (article no. 26430-4M000) or the entire contact group.

One of the most difficult cases is broken tracks on the board. If you have experience with soldering, you can restore the connection with a thin wire. To do this:

  1. Remove the board from the flashlight (usually it is secured with latches).
  2. Clean the break area from oxides.
  3. Solder the jumper using rosin and solder.
  4. Coat the soldering area with varnish to protect against corrosion.

Critical information: if a resistor on the board burns out (a common occurrence when installing LEDs), its value should be 6.8 ohms for the brake light and 22 ohms for the turn signal. Using resistors of a different resistance will lead to incorrect operation of the alarm.

How to check the flashlight board for breaks?

Use the multimeter in dial mode. Connect the probes to the beginning and end of the track - if there is no sound signal, the circuit is broken. Pay special attention to the areas near the soldering of lamps and connectors.

Selecting lamps: which ones are best for Almera N16?

In the taillights Nissan Almera N16 The following types of lamps are used:

  • 🔴 Brake light/marker: P21/5W (double strand)
  • 🟡 Turn signal: PY21W (orange)
  • ⚪ Reverse: W16W
  • 🔴 Fog light: P21W (if installed)

When choosing lamps, pay attention to:

  • 🔹 Base type - must strictly correspond to the original.
  • 🔹 Power — an excess of more than 20% will lead to melting of the cartridge.
  • 🔹 Color temperature - for LED optimally 6000K (white light), for halogen - 3000K (warm).
Lamp type Recommended Brands Average price, rub. Notes
P21/5W (stop/clearance) Osram, Philips, Narva 150–400 LEDs require resistors
PY21W (turn signal) Bosch, GE, MTF Light 100–300 Orange LEDs may not flash
W16W (reverse) Koito, Tungsram 80–200 LED options require polarity

When installing LED lamps consider:

  • 🔹 They consume less energy, but can cause errors on the instrument panel.
  • 🔹 Polarity check required - if connected incorrectly, the lamps will not light up.
  • 🔹 Turn signals require lamps with a built-in resistor or external load resistors (50W 6.8 Ohm).

Modernization of taillights: tuning and improvements

Many owners Almera N16 strive to update the appearance of the car, starting with the rear lights. Here are some popular upgrade options:

  • 🔴 Tinting of lights — film or special varnish gives a more aggressive look. Important: tinting should not reduce light transmission by more than 30% (according to GOST).
  • 💡 Installation of LED modules — complete replacement of the interior of the flashlight with LED assemblies. Requires wiring improvements.
  • 🔄 European modification — replacement of lights with versions from Nissan Almera Tino (articles 26400-4M200 And 26410-4M200), which have a different design.
  • 🔥 Smokey lanterns - purchase of already tinted lights (for example, from Depo with markings Smoke).

When tuning, consider legal aspects:

  • 📜 Tinting is prohibited brake lights and turn signals (fine 500 rubles under Article 12.5 of the Administrative Code).
  • 📜 LED lamps in clearance and brake lights are allowed if they are certified (marking E or DOT).
  • 📜 Changing the color of the signals (for example, blue feet) will result in the deprivation of rights for 6–12 months.

If you decide to install Euro-lanterns from Almera Tino, be prepared for modifications:

  • 🔧 Re-soldering of connectors will be required (pinout is different).
  • 🔧 The bumper may need to be trimmed for a perfect fit.
  • 🔧 It is necessary to reconfigure the headlight range control (if installed).
💡

Before tinting the lights, apply a special varnish to the inside Night Shade — it does not interfere with light transmission, but gives a darkening effect.

Where to buy spare parts: trusted sellers and advice

When purchasing tail lights or lamps for Almera N16 It is important to choose a reliable seller to avoid counterfeits. We recommend the following options:

  • 🛒 Official dealers Nissan - guarantee of original spare parts, but high price.
  • 🛒 Online stores:
    • Exist.ru — a wide range of analogues, convenient selection by VIN.
    • Autodoc.ru — frequent discounts, but sometimes long waits for delivery.
    • Emex.ru — optimal prices for Depo And TYC.
  • 🛒 Markets and showdowns — you can find used flashlights in good condition for 1,500–3,000 rubles.

When purchasing, pay attention to:

  • 🔹 Availability of certificate — original spare parts must have a hologram Nissan.
  • 🔹 Seal condition — if the rubber has hardened, the flashlight will quickly fog up.
  • 🔹 Complete set — the box should contain mounting screws and instructions.
⚠️ Attention: At disassembly sites they often sell lanterns with cracks covered with sealant. Check them for clarity - even minor damage will lead to fogging!

If you buy LED lamps, give preference to brands with a guarantee:

  • 🔹 Philips X-tremeVision LED — high brightness, but expensive (~2,000 rubles per set).
  • 🔹 Osram LEDriving — optimal price/quality ratio (~1,200 rubles).
  • 🔹 MTF Light Argentum - budget option (~600 rubles), but less resource.
💡

Before purchasing a flashlight, check whether it is suitable for your year of manufacture. Headlights before and after 2003 have different brake light reflector shapes!

FAQ: Frequently asked questions about taillights Nissan Almera N16

Is it possible to drive with one tail light not working?

Technically it is possible, but this is a violation of traffic rules (Article 12.5 of the Administrative Code). Fine - 500 rubles. In addition, it is dangerous: other drivers may not notice your signals, especially in the dark. If a brake light bulb burns out, the risk of an accident increases 3 times.

What sealant is best to use to repair cracks?

Optimal options:

  • ABRO WS-904 — universal sealant for plastic, withstands temperature changes.
  • Permatex 81730 — transparent, does not turn yellow over time.
  • 3M Scotch-Weld DP8005 - two-component, for serious damage.

Clean the surface before application isopropyl alcohol and degrease.

Why does the turn signal flash quickly after replacing the bulb with an LED one?

This is due to the fact that LED lamp consumes less current, and the turn signal relay perceives this as a burnt out lamp. Solutions:

  • Install resistor-load (6.8 Ohm, 50W) parallel to the lamp.
  • Replace the turn signal relay with contactless (For example, Hella 2RA 003 556-031).
  • Use LED lamps with built-in resistor (For example, Philips 12962BWX2).

How to remove the lamp if the screws are rusty?

If the screws do not come out:

  1. Process them WD-40 or liquid key and wait 10–15 minutes.
  2. Use impact screwdriver or a socket wrench with an extension for more force.
  3. If the screw is broken, drill it out with a drill 3–4 mm and cut a new thread.

After removing the light, clean the threads in the body and install new screws with anti-corrosion coating.

Is it possible to install lights from Nissan Almera Classic (B10) on N16?

No, this is impossible without serious modifications to the body. Lanterns Almera Classic have a different shape and fastenings. The only tuning option is to install lights from Almera Tino (see section on modernization).