Cabin filter for Nissan Almera Classic B10: full part numbers and replacement guide

Ensuring clean indoor air is not just a matter of comfort, but also a critical aspect of the health of the driver and passengers. For the owner Nissan Almera Classic B10, which is often operated in conditions of urban dust and rural dust, timely replacement of the cabin filter becomes a regular necessity. Ignoring this element leads to fogging of the glass, the appearance of an unpleasant odor and a decrease in the efficiency of the air conditioning system.

Many motorists are faced with the problem of finding the right article number filter, since markings may vary depending on the year of manufacture and the market for which the car was intended. In this article we will analyze in detail all the available options, original spare part numbers and high-quality analogues, so that you can choose the ideal element for your Nissan Almera without wasting extra time.

Why filter replacement is critical for the B10

Ventilation system Nissan Almera Classic B10 is designed in such a way that all air entering the cabin passes through a special filter element. Over time, this element becomes clogged with fine dust, fluff, soot and other contaminants. If you do not replace it on time, the performance of the fan drops, and the stove motor begins to work with increased load, which can lead to its burnout.

In addition, a clogged filter stops trapping allergens and toxic gases that can enter the cabin from the outside air. This is especially true in traffic jams when you are breathing the exhaust fumes of other cars. Using quality carbon filter allows not only to trap dust particles, but also to neutralize odors, creating a healthy microclimate inside the car.

⚠️ Attention: Operating a vehicle with a completely clogged filter can lead to icing of the air conditioner evaporator and costly repairs to the climate control system.

Owners Almera Classic The role of this consumable is often underestimated, considering it a trifle. However, it is the condition of the filter that directly affects the speed of windshield blowing, which is critical for safety in bad weather. Regular inspection and replacement is the simplest preventative measure that saves money on fan and evaporator repairs.

Original articles and catalog numbers

When ordering original spare parts for Nissan Almera Classic (platform B10) you need to know the exact catalog numbers. The manufacturer uses several variants of numbers, which may occur depending on the region of delivery and the year of production of the car. The most common and current original cabin filter number is 27277-AX000 or its equivalent 27277-AX00A.

Sometimes in catalogs you can find the number 27277-AX010, which is also original and completely suitable for installation. It is important to understand that all of these numbers are interchangeable and correspond to the same physical filter size and characteristics. If you see any of these numbers in a store, you can safely purchase it for your car.

• 🔹 27277-AX000 - the main original number, most often found in catalogs.
• 🔹 27277-AX00A — an updated version of the original filter.
• 🔹 27277-AX010 — an alternative article, identical in size.

When ordering through online stores, always check your vehicle's VIN, as in rare cases there may be differences in the ventilation system configuration for different markets. However, for most Almera Classic B10 manufactured before 2013, the above numbers apply without exception.

⚠️ Attention: Genuine Nissan filters are often supplied in cardboard packaging without a housing, only a filter element. Make sure you buy exactly what you need.

Popular analogues and manufacturers

If you don’t want to overpay for the Nissan brand, there are many high-quality analogues on the market from leading auto component manufacturers. These filters often surpass the original in the quality of the filter material or have additional features such as a carbon layer to protect against odors. Choosing an analogue is a smart step to save your budget without losing quality.

Among the most reliable manufacturers are German Corteco, Japanese Knecht and Korean Sakura. Each of these brands offers products that are equal in performance and sometimes even superior to standard parts. It is important to pay attention to the type of filter: regular paper or carbon.

• 🔸 Corteco 80000455 - German quality, an excellent option for those who value durability.
• 🔸 Knecht/LAK 110 - a premium analogue with a high degree of filtration.
• 🔸 Sakura C-1550 - a budget option, popular in the CIS countries.
• 🔸 Filtron KPE 234 - a reliable Polish manufacturer, widely available in stores.

It is also worth paying attention to the brand's products Mahle (often labeled as Knecht), which is a supplier to the assembly lines of many auto giants. Their filters are characterized by a high density of the filter layer and excellent throughput. Replacing with an analogue from Mahle or Corteco often gives a noticeable improvement in air draft from the deflectors.

Filter characteristics comparison table

For ease of choice, we have prepared a comparative table of the main parameters of the original filter and popular analogues. This will help you quickly navigate the offers and choose the best option for your needs. Pay attention to the presence of a carbon layer, as this significantly affects odor protection.

Manufacturer	Article	Type	Dimensions (mm)	Features
Nissan (Original)	27277-AX000	Paper	225 x 170 x 20	Basic filtering
Corteco	80000455	Paper	225 x 170 x 20	Reinforced frame
Sakura	C-1550A	Coal	225 x 170 x 20	Odor protection
Knecht	LAK 110	Coal	225 x 170 x 20	Premium quality
Filtron	KPE 234	Paper	225 x 170 x 20	Optimal ratio

As can be seen from the table, the sizes for all manufacturers are identical, which simplifies replacement. However, the type of filter may differ: paper filters only solid particles, while carbon additionally absorbs gases and odors. For residents of megacities with heavy traffic, it is strongly recommended to choose coal options.

What is a carbon filter and how does it work?

The carbon filter contains a layer of activated carbon between layers of filter material. This layer adsorbs molecules of harmful gases, exhaust fumes and unpleasant odors, while allowing clean air to pass through. A regular paper filter does not retain such gases.

Step-by-step replacement instructions

The process of replacing the cabin filter Nissan Almera Classic The B10 is quite simple and does not require special tools or a lift. The whole job takes no more than 15-20 minutes if you know where the filter housing is and how to open it. All you need is a Phillips screwdriver and maybe a flashlight if the glove compartment is dark.

Before starting work, you need to prepare the car: open the hood and disconnect the battery terminal (this is optional, but recommended for the safety of the electronics). Open the glove box (glove compartment) and empty it of unnecessary items. You will need to remove the opening limiter and unscrew the clamps holding the filter housing cover in place.

• 🛠️ Open the glove box all the way.
• 🛠️ Remove the stoppers on both sides by gently pressing them out with a screwdriver.
• 🛠️ Unscrew the screws holding the plastic filter cover.
• 🛠️ Remove the old filter and insert the new one, observing the direction of air flow.

Pay attention to the arrow on the filter housing, which indicates the direction of air flow. Typically it should be pointing down or to the side, depending on the design of the case. If you install the filter incorrectly, it will clog faster and filter the air worse. After installing the new part, assemble all the elements in reverse order.

⚠️ Warning: Do not forcefully insert the filter if it does not fit. Check the direction of the arrow and the integrity of the sealing rubber. Incorrect installation may result in unusual sounds when the fan operates.

Common mistakes when choosing and replacing

Despite the simplicity of the procedure, many owners Almera Classic make typical mistakes that reduce the efficiency of the filter. One of the most common problems is purchasing the wrong size filter. Cheap analogues from unknown brands may have errors in geometry, due to which they do not fit tightly to the body, and air begins to bypass the filter.

Another mistake is ignoring the condition of the filter housing. If it has accumulated moisture, leaves or debris, installing a new filter will not solve the odor problem. Moisture can lead to mold and mildew that will spread throughout the interior. Be sure to inspect the inside of the case every time you replace it.

• ❌ Buying a filter without checking the article by VIN code.
• ❌ Installing a filter without observing the direction of the arrow.
• ❌ Ignoring cleaning the case before installing a new element.
• ❌ Using too cheap filters with low material density.

It is also worth noting that some owners try to extend the life of the filter by washing it with water or a vacuum cleaner. This is categorically unacceptable, since the structure of the filter material is destroyed and it loses its properties. Cabin filter - This is a consumable item that can only be replaced with a new one.

Nuances of operation in different conditions

The region in which the vehicle is used significantly influences the frequency of filter replacement. If you live in a large city with high dust levels and heavy traffic, it is recommended to change the filter every 10-15 thousand kilometers or every six months. In rural areas, where there is a lot of dust and plant fluff, this interval may be even shorter.

In high humidity environments, such as coastal areas, there is an increased risk of mold forming inside the filter housing. In such cases, it is worth considering installing antibacterial filters or more frequent replacement of standard elements. In addition, in rainy weather, be sure to check the condition of the air conditioning drain pipes.

The winter period also has its own characteristics. A clogged filter makes it difficult to blow through the windshield, which is critical for safety when driving in snowfall. If you notice that the windows are fogging up faster than usual, first check the condition of the cabin filter. Timely replacement can prevent the need for costly evaporator repairs.

Where to buy and how to avoid counterfeits

Purchase spare parts for Nissan Almera Classic should only be done in trusted stores or authorized dealers. There are many fakes on the market, especially popular brands like Sakura or Corteco. A counterfeit filter may have low-quality material that quickly deteriorates, or the wrong size.

Pay attention to the packaging: for original and high-quality analogues, it always has clear printing, correct fonts and protective holograms. If the price seems suspiciously low, this is almost always a sign of a fake. Always request a receipt and product warranty upon purchase.

• ✅ Check the integrity of the packaging and the presence of protective elements.
• ✅ Compare the article on the package and on the filter itself.
• ✅ Buy from specialized auto parts stores.
• ✅ Avoid questionable sales points in markets.

If you doubt the authenticity of the product, ask the seller to show the certificate of conformity. For original Nissan parts, this is a mandatory procedure. Remember that saving on a filter can result in serious problems with the ventilation and air conditioning system, the repair of which will cost many times more.

How to distinguish an original from a fake?

The original Nissan filter comes in a thick cardboard packaging with a clear logo. The filter itself is rigid, with smooth edges and high-quality corrugation. Counterfeits often have soft packaging, blurry text, and low-quality filter material that breaks when touched.

Conclusion and final recommendations

Selecting and replacing the cabin filter for Nissan Almera Classic B10 is a simple but important procedure that directly affects the comfort and health of the driver. Knowing the right one article number and high-quality analogues, you can easily find a suitable part in any auto parts store. Don't forget to check the installation direction and condition of the filter housing.

We hope this information will help you make the right choice and keep your car's ventilation system in excellent condition. Regular replacement of consumables is the key to a long life of all components of the car and clean air in the cabin. Correct selection of a filter by VIN code guarantees 100% compatibility and system efficiency.

If you notice that the air from the deflectors has become weaker or an unpleasant odor has appeared, do not put off replacing the filter until later. This is a simple step that can save you a lot of problems in the future. Take care of your car, and it will reward you with reliable service.

What is the article number of the original cabin filter for Almera Classic B10?

The main original part number is 27277-AX000. There are also numbers 27277-AX00A and 27277-AX010, which are completely interchangeable.

Can I use a carbon filter instead of a paper filter?

Yes, the carbon filter is an improved version of the paper one. It better retains odors and harmful gases, while the dimensions and seats are identical.

How often should the cabin filter be changed?

It is recommended to change the filter every 15,000 km or once a year. In a big city or dusty area, it is better to reduce the interval to 10,000 km.

Where is the cabin filter on Almera Classic?

The filter is located behind the glove box (glove compartment). To access it, you need to remove the drawer opening limiters and unscrew the lid latches.

Which analogue is best suited for this model?

Some of the best analogues are Corteco 80000455, Knecht LAK 110 (carbon) and Sakura C-1550. They provide excellent filtration quality and durability.