Nissan Teana J32 is a business sedan that has gained popularity due to its reliability and comfort. However, over time, even this “Japanese” has problems with lighting: lamps dim, headlight glasses become cloudy, correctors or xenon ignition units fail. In this article we will look at everything you need to know about headlights. Teana J32 - from original articles to step-by-step replacement and legal tuning.

A special feature of the model is complex optics with adaptive light (on top versions) and xenon headlights in basic trim levels. Owners often encounter clouding of lenses, lamp burnout D2S or malfunctions corrector control unit. We have collected current data for 2026, including article numbers, prices and repair life hacks.

Original headlights Nissan Teana J32: articles and configurations

Headlights on Teana J32 (2008–2013) vary depending on the year of manufacture and configuration. Main options:

  • 🔦 Halogen headlights (basic versions) - article number 26010-4M000 (right) and 26011-4M000 (left). Installed on models before 2010 with engines QR25DE And VQ25DE.
  • 💡 Xenon headlights (with ignition unit) - article number 26010-4M010 (right) and 26011-4M010 (left). Standard for versions 2.5L And 3.5L after 2010.
  • 🌟 Adaptive headlights (with automatic adjustment) - article number 26010-4M020. Installed on top trim levels Teana Premium.

Important: Headlights for restyled versions (2011–2013) have a modified reflector shape and are not interchangeable with pre-restyled versions! Check the article by VIN code or visually - the Restyle has a “sharper” design of the lower edge.

Equipment Headlight type Article (right/left) Approximate price (new), ₽
Basic (2008–2010) Halogen 26010-4M000 / 26011-4M000 12 000–15 000
Average (2010–2013) Xenon 26010-4M010 / 26011-4M010 20 000–25 000
Premium (2011–2013) Adaptive xenon 26010-4M020 / 26011-4M020 30 000–38 000
⚠️ Attention: When buying used headlights, check the integrity reflector - on Teana J32 it often peels off due to overheating. Also check availability proofreader (if it is not there, the headlight will have to be modified).

Analogs and non-original options: what to choose?

Original headlights Nissan expensive, but there are high-quality analogues on the market:

  • 🔧 TYC (article 20-6505-00 for halogen) - a budget option with good light transmittance. Price: ~8,000 RUR per pair.
  • 💎 Depo (article 335-1115R-AS for xenon) - middle segment, often comes with lenses already installed Morimoto.
  • 🚀 Koito (article 11-2103-00) is a premium analogue, the quality is not inferior to the original. Price: ~22,000 RUR per pair.

Critical moment: on cheap Chinese headlights (for example, Fengjiu) a common problem with geometry of the light beam - they do not pass inspection at service stations due to improper light dispersion. If you plan to install LED lamps, it is better to immediately take headlights from projection lenses (For example, Depo Pro).

For xenon headlights, it is important to check compatibility ignition unit. On Teana J32 blocks are used D2S with connector P32d-2. Suitable analogues:

  • 🔌 Philips Xenon Kit (article 851226717316) - a reliable option with a 2-year warranty.
  • 💡 Osram XENARC (article 66240) - the best luminous flux (3200 lumens).
📊 What headlights are on your Teana J32?
  • Halogen
  • Xenon
  • Adaptive
  • LED tuning
  • I don't know

Step-by-step instructions for replacing a headlight

Replacing the headlight with Teana J32 requires caution - especially when it comes to xenon with an ignition unit. Tools needed:

  • 🔧 Socket wrench on 10 mm.
  • 🔧 Screwdriver with Phillips bit PH2.
  • 🧤 Gloves (so as not to leave greasy marks on the glass).

Procedure:

  1. Disconnect the negative terminal of the battery (required!).
  2. Remove the front bumper (unscrew the 4 bolts from the bottom and 2 bolts from the sides in the wheel arches).
  3. Disconnect the headlight power connector (press the latch and pull down).
  4. Unscrew the 3 headlight mounting bolts (two on top, one on bottom).
  5. Carefully pull out the headlight without pulling the corrector wires.

Disconnect battery

Remove the bumper (or bend its edge)

Disconnect the power connector

Unscrew the fastening bolts

Check the integrity of the rubber seal -->

When installing a new headlight, pay attention to:

  • 🔹 Sealing rubber - if it is torn, the headlight will “fog up”.
  • 🔹 Adjusting the light — after replacement, be sure to adjust the tilt angle on the stand.
  • 🔹 Connecting the corrector — on xenon headlights, the corrector connector often breaks during careless dismantling.
⚠️ Attention: If the headlight does not light after replacement, check the fuse F37 (10A) in the mounting block. It is responsible for powering the left headlight, and F38 (10A) - for the right.

Headlight tuning: LED, angel eyes and tinting

Modernization of headlights Teana J32 popular among owners, but it is important to do it legally. Let's look at the main options:

1. Installation of LED lamps

Replacing halogen or xenon with LED requires caution. Suitable models:

  • 💡 Philips Ultinon Pro9000 (article 12972BWX2) - the best option for halogen headlights (luminous flux 2500 lumens).
  • 💡 Osram LEDriving HL (article 67210CW) - optimal for xenon lenses.

Important: LED lamps in halogen headlights Teana J32 illegal according to GOST R 51709-2001 (due to incorrect light beam). To avoid problems during maintenance, install them only in headlights with projection lenses (for example, after replacing with Depo Pro).

2. Angel eyes

A popular tuning is installing LED rings around the lenses. For Teana J32 fit:

  • 🔘 Morimoto XB LED (diameter 80 mm) - bright, with a uniform glow.
  • 🔘 Oracle Lighting (article 5051-001) - with function halo dimming (dimming when high beams are turned on).

Installation requires disassembling the headlight (heating in the oven at 100°C to remove sealant). Cost of work in the service: ~3,000 ₽ for one headlight.

3. Window tinting

Light tinting (up to 30%) is allowed, but full covering with black film - no (fine under Article 12.5 of the Administrative Code). Alternative:

  • 🖤 Varnish "Smoke" — applied to the inside of the glass, gives a slight darkening effect.
  • 🖤 LLumar film (50% degree) - transmits enough light for legal use.
💡

Before tinting, check the headlight for cracks — after applying varnish or film they will become more noticeable. To remove old sealant, use white spirit, but not acetone (it clouds the plastic).

Frequent faults and repair methods

Headlights Teana J32 have typical “diseases” that can be eliminated without replacement:

1. Foggy headlights

Reasons:

  • 💧 Crack in glass or case.
  • 💧 Clogged ventilation valves (located at the bottom of the headlight).
  • 💧 Damage to the rubber seal.

How to fix:

  1. Remove the headlight and dry it with a hairdryer (temperature no higher than 60°C).
  2. Blow out the ventilation holes with compressed air.
  3. Apply sealant ABRO 11-AB for cracks (if any).

2. The corrector does not work

On Teana J32 The headlight range control often fails due to oxidation of the contacts. Symptoms:

  • 🔧 The headlights shine “into the sky” or “into the asphalt.”
  • 🔧 There is an error on the dashboard Check Headlight Leveling.

Repair:

  • Check the fuse F20 (15A) in the salon.
  • Remove the corrector unit (located under the steering wheel, behind the panels) and clean the contacts WD-40.
  • If it doesn’t help, replace the block (part number 27540-4M000, price ~5,000 ₽).

3. Bulb burnout

Lamp service life Teana J32:

  • 💡 Halogen (H7) - 500–800 hours.
  • 💡 Xenon (D2S) - 2000–3000 hours.

If the lights come on more frequently, check:

  • 🔋 On-board voltage (must be 13.8–14.4V).
  • 🔌 Wiring integrity (wires and ignition units are often frayed).
How to check the xenon ignition unit?

Connect the unit to the battery (plus +12V, minus k GND). If the lamp does not light up, the unit is faulty. Also check the resistance on the connector - it should be 0.5–1.0 Ohm.

⚠️ Attention: On Teana J32 with xenon, you cannot touch the lamp bulb D2S bare hands - traces of fat lead to overheating and bloating of the flask. Use gloves or a cloth soaked in alcohol.

Adjusting headlights: instructions and standards

Incorrectly adjusted headlights Teana J32 blind oncoming drivers and threaten with a fine (Article 12.20 of the Administrative Code, 500 ₽). Standards according to GOST:

  • 📏 Bun height: no higher 1.0 m at a distance 10 m from the car.
  • 📏 Tilt angle: 1.0–1.5% (for xenon - strictly 1.0%).

How to adjust it yourself:

  1. Place the machine on a level surface 5 m from the wall.
  2. Apply markings on the wall with chalk (the center of the headlights should coincide with the center of the light spots).
  3. Rotate the adjusting screws (located on the top and side of the headlight) with a screwdriver PH2.

For xenon headlights with corrector:

  • 🔧 Set the corrector knob to position 0 (one passenger per cabin).
  • 🔧 Adjust the light so that the chiaroscuro border is at 5 cm below headlight center height.
💡

If after adjustment the headlight shines “crookedly”, check play in the fastening - bolts often become loose due to vibration. Torque them 8–10 Nm.

Where to buy spare parts: verified sellers and prices

Prices for headlights and components for Teana J32 vary greatly. Where is the best place to buy:

Spare part Where to buy Price, ₽ Notes
Headlight original (xenon) Exist.ru 22 000–25 000 1 year warranty, tested for leaks.
headlight Depo (analog) AvtoALL 12 000–14 000 They often come without lamps and corrector.
Lamp D2S (Osram) Autodoc 2 500–3 000 Beware of fakes - check the hologram.
Ignition block Philips Avito (used) 1 500–2 500 Check for functionality before purchasing.

When buying used headlights, pay attention to:

  • 🔍 Reflector condition — there should be no black spots (a sign of detachment).
  • 🔍 Glass integrity - microcracks will lead to fogging.
  • 🔍 Corrector performance — check the movement of the rod when rotating the handle in the cabin.

Advice: If you buy headlights from disassembly, take them in pairs - even if the second one works. The difference in light color between the old and new headlights will be noticeable.

FAQ: answers to frequently asked questions

Is it possible to install LED bulbs in standard halogen headlights?

Technically yes, but this illegally according to traffic rules (fine 500 ₽). LED lamps in halogen optics create an incorrect light beam that blinds oncoming drivers. The legal option is to replace the headlights with lensed (For example, Depo Pro) followed by installation of LED.

Why do lamps burn out quickly after replacement?

Most often the reason is increased voltage on-board network (for example, due to a faulty generator). Check the voltage at the battery terminals with a multimeter while the engine is running - it should be 13.8–14.4V. Also inspect contacts in the fuse box (oxidation leads to voltage surges).

How to remove a headlight without removing the bumper?

This is possible, but extremely inconvenient. Alternative way:

  1. Unscrew the headlight mounting bolts (3 pcs.).
  2. Bend the edge of the bumper (after removing the clips).
  3. Carefully pull out the headlight at an angle 45°.

Risk: bumper latches or headlight seal may break.

Which lamps are best for xenon on Teana J32?

Optimal options in terms of price/quality ratio:

  • Philips 85122 - best color temperature (4300K, close to daylight).
  • Osram 66240 — maximum brightness (3200 lumens).
  • MTF Light Aurora — budget option (~1,500 ₽ per lamp).

The service life of the original lamps is ~3,000 hours. Cheap analogues (for example, Narva) serve 2 times less.

What to do if the headlight range control does not work?

Diagnostic procedure:

  1. Check the fuse F20 (15A).
  2. Inspect the connector under the steering wheel (contacts often oxidize).
  3. Check the wires from the corrector unit to the headlights (break or short circuit).
  4. If the unit is faulty, replace it (part no. 27540-4M000).

Service repair cost: ~2,000–3,000 RUR.