Nissan Murano Z51 - a crossover that, even after years, remains in demand due to its stylish design and reliability. But over time, even the best quality headlights lose brightness, become cloudy or fail. If you notice that the lights are dim and the plastic has yellowed, it's time to consider a replacement or upgrade. In this article we will look at everything you need to know about headlights. Murano Z51: from the choice of original and non-original options to step-by-step installation instructions and legal nuances of tuning.

Feature optics Z51 — in its design: separate blocks are used here for low/high beam and dimensions, and in top versions there are bi-xenon headlights with automatic adjustment. Moreover, even basic halogen options can be upgraded if you know the subtleties. We analyzed reviews from owners, tests by independent experts and regulatory documents to collect up-to-date information without water and general phrases.

Original headlights for Murano Z51: articles and features

Factory headlights for Nissan Murano Z51 (2008–2014) were produced in several modifications depending on the configuration and sales market. Main articles:

  • 🔦 26010-4M000 — right headlight (halogen, basic version)
  • 🔦 26010-4M001 — right headlight (halogen, with corrector)
  • 🔦 26010-4M010 - right headlight (xenon, for versions with AFS)
  • 🔦 26060-4M000 — left headlight (halogen, basic)

Original headlights are produced by the company Stanley Electric (Japan) and are distinguished by high quality plastic and tightness. However, their cost on the secondary market starts from 25,000–40,000 rubles per pair, which forces many owners to consider analogues. An important nuance: xenon versions use adaptive lighting system (AFS), which requires additional configuration after replacement.

When purchasing used original headlights, pay attention to:

  • 🔍 Condition reflector - it should not be worn or oxidized.
  • 🔍 Integrity glass — microcracks lead to moisture ingress.
  • 🔍 Performance proofreader (if any) - check the movement of the lamp when adjusting.
📊 What headlights are installed on your Murano Z51?
  • Halogen
  • Xenon
  • LED (tuning)
  • I don't know

Analogs and non-original options: what to choose?

If original headlights are too expensive, you can consider high-quality analogues. The main thing is to avoid cheap Chinese replicas with AliExpress, which often leak and have poor light transmission. The table below shows proven manufacturers and their features:

Brand Model/Article Lamp type Average price (pair) Pros Cons
TYC 20-6507-00 / 20-6508-00 Halogen 12 000–15 000 ₽ Good sealing, close to the original light Plastic is less durable
Depo 335-1135R / 335-1135L Halogen 9 000–12 000 ₽ Budget option, easy to find on sale Frequent complaints about condensation
Koito N/A (to order) Xenon/AFS 30 000–35 000 ₽ High quality, full compatibility Long wait for delivery

Important: When choosing analogues, check compatibility with your configuration. For example, headlights from Murano Z52 (restyling) not suitable for Z51 due to the changed shape of the fastenings. Also note certification according to GOST R 41.48-2004 — without it, the headlights may not pass inspection.

⚠️ Attention: Some sellers position headlights as “universal” for Murano And Pathfinder R51. In fact, despite the external similarity, the mounts and connectors for these models are different. Please check with before purchasing VIN code or catalog numbers.

Step-by-step instructions for replacing headlights with Murano Z51

Replacing headlights with Murano Z51 does not require special tools, but will require accuracy. On average the process takes 1.5–2 hours for one side. You will need:

  • 🔧 Socket wrench on 10 mm
  • 🔧 Screwdriver with Phillips bit
  • 🔧 Plastic spatulas for removing clips
  • 🔧 Sealant for headlights (for example, ABRO WS-904)

Procedure:

  1. Disconnect the negative terminal of the battery (to avoid short circuit).
  2. Remove the front bumper (unscrew the 4 bolts on the bottom and 2 on the sides, then carefully unclip the clips).
  3. Disconnect the power connector from the headlight by pressing the latch.
  4. Unscrew the 3 headlight mounting bolts (two on top, one on bottom).
  5. Remove the headlight by pulling it towards you.

Disconnect battery

Remove the bumper (or bend part of it)

Check the new headlight for integrity

Prepare sealant for sealing

Check lamp operation before installation-->

When installing a new headlight, be sure to check connection polarity — an incorrect connection can damage the ignition unit (in xenon versions) or the fuse. After installation, adjust the light using adjusting screws (they are located on the top and side of the headlight).

What should I do if the headlight does not work after replacement?

1. Check the fuse F35 (10A) in the block under the hood.

2. Make sure the connector is connected until it clicks.

3. In xenon versions, check the ignition unit (ballast) - it can fail during power surges.

4. If the problem persists, check the ground on the body (often oxidizes at the headlight mounting location).

Headlight tuning: LED, xenon and polishing

Many owners Murano Z51 want to improve lighting, especially if the standard halogen lamps (H7 for your neighbor and HB3 for distant ones) can no longer cope. Let's consider popular tuning options:

1. Installation of LED lamps

LED lamps provide bright white light (5000–6000K) and consume less energy. However, not all models are suitable for Murano Z51 due to the characteristics of the reflector. Best options:

  • 💡 Philips X-tremeUltinon (article 12972BWX2) - optimal price/quality ratio.
  • 💡 Osram LEDriving HL — good light output, but requires modification of the mounting.

Important: LED lamps in halogen headlights without lenses can blind oncoming drivers, which can result in a fine under Art. 12.5 Code of Administrative Offenses (500 ₽).

2. Switch to xenon

If your version Murano Z51 originally came with halogen, installation of xenon will require:

  • 🔧 Shopping bi-xenon lenses (For example, Morimoto Mini D2S).
  • 🔧 Ignition unit and headlight washer (required for legalization!).
  • 🔧Settings autocorrector (if it doesn’t exist, you’ll have to install it).

Cost of the full set (with installation) - from 35 000 ₽. Without a washer and corrector, xenon will not pass inspection!

3. Polishing and restoration of headlights

If the headlight plastic becomes cloudy, it can be polished. For this you will need:

  • 🧴 Polishing set (eg. 3M 39045).
  • 🧴 Protective varnish (Delta Kits FP-HK).
  • 🧴 Masking tape to protect the body.

The process takes about 3 hours for both headlights. The effect lasts 1.5–2 years, if you apply varnish.

💡

Before polishing, warm up the headlight with a hairdryer - this will help remove deep scratches. But don't overheat: temperatures above 60°C can warp the plastic.

Typical problems and their solutions

Owners Murano Z51 often encounter several common problems related to headlights. Let's look at them in detail:

1. Condensation inside the headlight

If moisture appears inside the headlight, this is a sign depressurization. Reasons:

  • 💧 Crack in glass or case.
  • 💧 Wear of the rubber seal.
  • 💧 Clogging breather (ventilation valve).

Solution:

  1. Remove the headlight and dry it with a hairdryer (temperature no higher than 50°C).
  2. Check the breather (it is located behind the headlight) - clean it with a needle.
  3. Apply sealant to the joints between the glass and the body.

2. Low/high beam does not work

Most often the problem lies in:

  • 🔌 Burnt out lamp (check H7 or HB3).
  • 🔌 Oxidized contacts in the connector.
  • 🔌 Faulty light relay (in the fuse box under the hood).
⚠️ Attention: If after replacement the lamps quickly burn out, check the voltage in the on-board network. On Murano Z51 it must be within 13.8–14.4 V. Exceeding this leads to premature failure of the lamps.

3. Xenon flashes or does not light up

The most common problems with xenon headlights are:

  • ⚡ Ignition block (ballast).
  • ⚡ Lamp (D2S or D2R).
  • ⚡ Wiring (especially at the crossing point over the wing).

For diagnostics, swap the ignition units from the left and right headlights. If the problem has moved, the block is to blame.

Legal aspects: what is allowed and what is not?

Any changes in car optics are regulated Technical Regulations of the Customs Union 018/2011 And GOST R 51709-2001. Here's what you need to know:

  • ⚖️ Prohibited:
    • Installing xenon in halogen headlights without lenses and washer.
    • Using LED bulbs that are not certified for your headlight model.
    • A glow color other than white, yellow or orange (for dimensions).
  • ✅ Allowed:
    • Replacing halogen lamps with brighter ones (but of the same power).
    • Installation of xenon, if it was provided by the factory (there are standard lenses and washer).
    • Polishing and tinting of headlights (while maintaining light transmittance of at least 70%).

When undergoing a technical inspection, the inspector will definitely check:

  • 🔦 Availability markings on the headlight (must match the data in the vehicle title).
  • 🔦 Performance proofreader And washer (for xenon).
  • 🔦 Color and intensity of light (there should be no glare).

The fine for illegal xenon or LED is 500 ₽ (Article 12.5 of the Administrative Code), but in the event of an accident due to poor lighting, the blame will fall entirely on the driver.

FAQ: Frequently asked questions about headlights Murano Z51

Can headlights from a Murano Z52 be installed on a Z51?

No, despite the external similarity, the mounts and shape of the reflector are different. Headlights from Z52 wider and have a different connection connector. Also in Z52 LED dimensions are used that are not compatible with electrics Z51.

Which low beam lamps are better to install instead of standard ones?

The best options for halogen headlights are:

  • Osram Night Breaker Laser (+150% brightness, but service life ~500 hours).
  • Philips RacingVision (+150%, but they heat up more than standard ones).
  • Narva Range Power White (cold light 4200K, close to xenon).

For LED only models with correct placement of diodes (For example, Philips Ultinon Pro9000).

How to adjust the headlights after replacement?

The adjustment is performed on a level surface with a load in the cabin (driver + 70 kg in the front seat). Algorithm:

  1. Drive the car close to the wall (distance 5 m).
  2. Apply markings on the wall in the center of the headlights and 10 cm below the low beam lamps.
  3. Rotate the adjustment screws (upper - vertically, side - horizontally) until the light beam coincides with the markings.

For xenon, adjustment must be carried out at a service station using adjustment stand.

What should I do if there is water left in the headlight after washing?

If the water has not evaporated after 2-3 hours, it means the headlight is depressurized. Actions:

  1. Remove the headlight and dry it (you can use silica gel).
  2. Check the integrity of the glass and seal.
  3. Apply sealant to the joints and replace the vent valve (breather).

If the problem recurs, the headlight will have to be replaced - constant moisture leads to oxidation of the contacts and failure of the reflector.

Is it possible to drive with one working headlight?

No, this is a violation clause 19.1 of traffic rules (“In the dark and in conditions of insufficient visibility, regardless of the road lighting, a moving vehicle must have high or low beam headlights on”). Fine - 500 ₽ (Article 12.20 of the Administrative Code). In addition, one headlight blinds oncoming drivers due to the asymmetrical light output.

💡

When choosing headlights for your Murano Z51, always check the part numbers with the vehicle's VIN. Even within the same model year, different versions of optics could be used (for example, with and without AFS).