Headlights on Nissan Primera P11 (1996–2002) - one of the key elements of the safety and appearance of the car. Over time, optics become dull, cloudy, or fail, requiring replacement or repair. In this article we will look at everything the owner needs to know. Primera P11: from choosing original and non-original headlights to step-by-step instructions for replacing them, tuning with LEDs or xenon, as well as the nuances of restoring reflectors.

We will pay special attention to typical problems - for example, oxidation of contacts, glass fogging or lamp burnout, which are often found among owners of this model. We will also consider the legal aspects of optics tuning in 2026 and give recommendations on choosing reliable suppliers of spare parts.

Original and similar headlights for Nissan Primera P11: articles and prices

Original headlights for Primera P11 are produced under the brand Nissan and have article numbers depending on the side and type of optics:

  • 🔹 Left headlight (low/high beam): 26010-4M000 or 26010-4M001 (with corrector)
  • 🔹 Right headlight: 26020-4M000 or 26020-4M001
  • 🔹 Fog lights (PTF): 26510-4M000 (left), 26520-4M000 (right)

The cost of new original headlights varies from 8,000 to 15,000 rubles per piece (depending on the supplier and the availability of a proofreader). However, there are high-quality analogues from manufacturers on the market TYC, Depo, Hella And Bosch, which will cost less - from 3,500 to 7,000 rubles.

Manufacturer Article number (left headlight) Price, rub. Features
Nissan (original) 26010-4M001 12 000–15 000 With corrector, full compatibility
TYC 1-1502-00-9 4 500–5 500 Good glass quality, but may have problems with sealing
Depo 335-1101L-AS 3 800–4 800 Budget option, often requires modification of fastenings
Hella 1FV 008 102-001 7 000–9 000 Premium quality, long service life

Important: when purchasing analogues, check compatibility with your modification Primera P11 (for example, for restyled versions 1999–2002, other articles may be required). Also pay attention to ECE certification — without it, the headlights will not pass inspection.

📊 Which headlights do you prefer for Nissan Primera P11?
  • Original (Nissan)
  • Analogs (TYC, Depo)
  • Used from disassembly
  • Tuned (LED/xenon)

Typical headlight faults Primera P11 and their reasons

Headlights on Nissan Primera P11 suffer from several “diseases” characteristic of cars of this age:

  1. Fogging - the most common problem. Reasons: depressurization of seams, cracks in the glass or clogged ventilation valves.
  2. Oxidation of contacts in the power connector, which leads to flickering or complete failure of the lamps.
  3. Cloudy glass due to micro-scratches and exposure to UV rays (especially important for plastic headlights).
  4. Reflector burnout — over time, it loses its mirror coating, which reduces the brightness of the light by 30–50%.

Another common malfunction is headlight range control not working (if it is included in the package). Usually a burnt out motor or broken wiring is to blame. Check its operation by turning the control on the dashboard - if the light does not change angle, repair will be required.

⚠️ Attention: If the headlight fogs up from the inside, do not ignore the problem! Moisture accelerates corrosion of the reflector and can cause a short circuit in the lamp. A temporary solution is to dry the headlights with a hairdryer (temperature no higher than 60°C), but a complete repair will require sealing.
How to check the tightness of the headlight?

Place the headlights in warm water (no higher than 40°C) for 1-2 minutes. If air bubbles appear, there is a crack or depressurization of the seam. This method helps to find the problem area before repairing.

Step-by-step instructions for replacing a headlight with Nissan Primera P11

Replacing the headlight with Primera P11 does not require special tools, but will require accuracy. Working time is about 30–40 minutes per side.

Required tools:

  • 🔧 Phillips screwdriver (PH2)
  • 🔧 10 mm socket wrench
  • 🔧 Plastic puller (or flat screwdriver)
  • 🔧 Gloves (to avoid leaving fingerprints on the glass)

Procedure:

  1. Disconnect the negative terminal of the battery (to avoid short circuit).
  2. Remove the front bumper (unscrew the 4 bolts on the bottom and 2 on the sides, then carefully pull it towards you).
  3. Disconnect the power connector from the headlight by pressing the latch.
  4. Unscrew the 3 headlight mounting bolts (two on top and one on bottom).
  5. Carefully pull out the headlights without pulling on the wires.
  6. Install the new headlight in reverse order, making sure the rubber seal lies flat.

☑️ Preparing to replace headlights

Done: 0 / 5
⚠️ Attention: When installing a new headlight, do not touch the glass with bare hands - grease marks will lead to clouding. Use alcohol wipes for cleaning.

If the light is not directed correctly after replacement, adjust it using corrector screws (located on the back of the headlight). To do this, place the car on a flat surface 5 meters from the wall and mark the center of the light spot - it should be 2-3 cm below the level of the headlights.

💡

Before purchasing a new headlight, check it for cracks and the integrity of the reflector. Even a small defect can lead to fogging within a month.

Headlight tuning: LED, xenon and reflector restoration

Many owners Primera P11 upgrade optics to improve the appearance and brightness of light. Let's consider three popular tuning options:

1. Installation of LED lamps

LED lamps (for example, Philips X-tremeUltinon or Osram LEDriving) give bright white light (up to 6000K) and consume less energy. However for Primera P11 it is important to choose models with correct base:

  • 💡 Low/high beam: H4 (double strand)
  • 💡 Fog lights: H3 or H11 (depending on year of manufacture)

Important: LED lamps in standard headlight reflectors Primera P11 are not always legal - according to GOST R 51709-2001, they must have a certificate of conformity for a specific car model. Without it, you can be fined 500 rubles (Article 12.5 of the Administrative Code).

2. Xenon lamps

Xenon (eg Morimoto Elite or Sylvania Xenarc) provides brightness up to 3200 lumens, but requires installation ignition unit. For Primera P11 sets with plinth are suitable H4, but definitely needed lenses (without them, xenon blinds oncoming drivers).

3. Restoration of reflectors

If the reflector has faded, it can be restored:

  1. Disassemble the headlights (heat the sealant with a hairdryer and separate the glass).
  2. Clean the reflector from the old coating with acetone.
  3. Apply a new coat of chrome paint (eg Spray Max 2K Chrome).
  4. Reassemble the headlights using new sealant (eg ABRO GS-808).
Tuning type Pros Cons Cost, rub.
LED lamps Bright light, low power consumption Can be blinding, not always legal 3 000–8 000
Xenon Maximum brightness, long service life Requires lenses, expensive installation 8 000–15 000
Restoration Restores factory appearance, cheaper than replacement Labor-intensive process, temporary effect 1 500–4 000
💡

Any optics tuning must comply with GOST. Before installing LED or xenon, check the legality with the local traffic police - in some regions there are strict restrictions.

Repairing foggy headlights: sealing and drying

If the headlights Primera P11 fog up, proceed according to the following algorithm:

  1. Diagnostics: Check the ventilation valves (they are located at the back of the headlight) - if they are clogged, clean them with a needle or compressed air.
  2. Drying: Remove the headlights and place them in a dry, warm place (for example, next to a heater) for 12–24 hours. Do not use a hair dryer - sudden heat may deform the plastic.
  3. Sealing: If fogging continues, apply new sealant (eg Permatex 81730) on the seams between the glass and the body.

For a temporary solution you can use silica gel bags — place them inside the headlight (for example, in a lamp socket). They will absorb moisture, but will not eliminate the cause of depressurization.

⚠️ Attention: If a lot of water has accumulated inside the headlight, check the drainage holes in the bumper - they may be clogged with leaves or dirt, causing moisture to enter the optics.
What to do if the headlight fogs up after washing?

This is normal - the moisture will evaporate after 1-2 hours with the light on. If fogging persists for longer, look for cracks or ventilation problems.

Where to buy headlights for Nissan Primera P11: verified suppliers

When purchasing headlights for Primera P11 It is important to choose a reliable seller to avoid counterfeits. We recommend the following options:

  • 🛒 Official dealers Nissan - guarantee of original spare parts, but high price.
  • 🛒 Online stores:
    • Exist.ru — wide range of analogues, fast delivery.
    • Autodoc.ru — convenient selection by VIN code.
    • Emex.ru - there are often discounts on TYC And Depo.
  • 🛒 Showdown: Used headlights can be found at Avito or Drom.ru, but check their condition (especially the reflector and glass).

When purchasing used headlights, be sure to check:

  • 🔍 Are there any cracks or chips on the glass.
  • 🔍 Does the corrector work (if provided).
  • 🔍 Are there any traces of repairs (for example, sealant on the seams).

Average price of used headlights in good condition - 2,000–4,000 rubles per piece. However, be prepared for additional expenses for restoration or replacement of lamps.

Frequently asked questions about headlights Nissan Primera P11

Is it possible to install bi-xenon lenses in standard headlights? Primera P11?

Technically yes, but this will require:

  1. Disassemble the headlights and remove the old reflectors.
  2. Install lenses (eg Morimoto Mini H1) and ignition unit.
  3. Adjust the lights so as not to blind oncoming drivers.

However, the legality of such tuning is questionable - without a GOST certificate you can be fined.

Why on Primera P11 Do low beam bulbs burn out often?

Main reasons:

  • 🔋 Poor contact in the connector (oxidation or burning).
  • 🔋 Voltage surges in the on-board network (check the generator).
  • 🔋 Using cheap low quality lamps.
  • 🔋 Vibrations (for example, due to worn shock absorbers).

Solution: clean the contacts, install a voltage stabilizer and use lamps with increased vibration resistance (for example, Philips LongLife EcoVision).

How to polish cloudy headlights Primera P11?

For polishing you will need:

  • 🧴 Abrasive paste (for example, 3M 39008).
  • 🧴 Polishing machine or drill with nozzle.
  • 🧴 Protective varnish (for example, Delta Kits Headlight Clear Coat).

Procedure:

  1. Cover the edges of the headlights with masking tape.
  2. Apply abrasive paste and polish in 2-3 stages (from coarse to fine grit).
  3. Coat the headlights with varnish to protect against UV rays.

The effect lasts for 1–2 years, after which the procedure must be repeated.

Which lamps are better to put in PTF Primera P11?

For fog lights (H3 or H11) we recommend:

  • 💡 Osram Night Breaker Laser — bright yellow light, good penetration into fog.
  • 💡 Philips WhiteVision — white light (4200K), stylish look.
  • 💡 Narva Range Power - a budget option with good light output.

Do not install xenon or LED in the PTF - this is prohibited by traffic regulations (fine 500 rubles).

What to do if after replacement the headlights shine crookedly?

The problem is the adjustment. To configure:

  1. Place the car on a flat area 5 meters from the wall.
  2. Place marks on the wall at the level of the center of the headlights.
  3. Rotate the adjusting screws (on the back of the headlight) until the light spot matches the marks.

If the adjustment does not help, check the headlights - they may be installed unevenly.