Nissan Murano Z51 (2015–2022) - a crossover that combines stylish design and advanced technology. Headlights of this generation have become one of the most discussed topics among owners: from problems with original halogens to issues of legal tuning for LED or xenon. In this article we will look at everything you need to know about headlights. Murano Z51 - from article numbers and compatibility to step-by-step replacement and legal nuances.

Optics feature Z51 - complex design with adaptive light (on top versions) and integrated DRL (running lights). Many owners are faced with cloudy glass, burnt-out lamps, or a desire to improve the luminous flux. We analyzed the experience of service centers, reviews from owners and technical documentation to collect up-to-date information without fluff and templates.

Original Nissan Murano Z51 headlights: part numbers and features

Headlights for Murano Z51 are divided into two types: for versions with halogen And LED light sources. Original spare parts are produced by the company Stanley Electric (Japan) and supplied under the brand Nissan. Important: left and right headlights are not interchangeable!

Main articles:

  • 🔦 Halogen headlight (left): 26060-4M00A (until 2018), 26060-4M01A (after 2018)
  • 🔦 Halogen headlight (right): 26061-4M00A / 26061-4M01A
  • 💡 LED headlight (left, for top versions): 26060-4M20A
  • 💡 LED headlight (right): 26061-4M20A

Please note: market lights USA/Canada (articles with the suffix USA) and Europe/Russia They differ in connection connectors and the shape of the light beam. Installing "American" on European Murano will lead to failure to pass a technical inspection due to an incorrect cut-off line.

📊 What headlights are on your Murano Z51?
  • Halogen (standard)
  • LED (top version)
  • Tuning already installed
  • I don't know

Analogs and non-original options: what to choose?

Original headlights Nissan for Murano Z51 cost from 40,000 to 80,000 rubles per pair. Alternative options can save money, but it's important to consider quality and compatibility. The best analogues in terms of price/quality ratio:

Brand Article (left/right) Lamp type Price (per pair), ₽ Features
TYC 20-9151-00-1 / 20-9152-00-1 Halogen 22 000–25 000 Good quality glass, but the plastic of the case is thinner than the original
DEPO 335-19032L / 335-19032R Halogen 18 000–20 000 Budget option, possible problems with tightness
MORIMOTO MM-MUR-Z51-L / MM-MUR-Z51-R Halogen/LED-ready 35 000–40 000 Improved optics for tuning, compatible with Morimoto XB LED

⚠️ Attention: When purchasing analogues, check for a certificate ECE R112 (for halogen) or ECE R113 (for LED). Without these markings, headlights will not pass technical inspection in Russia and the EU.

For owners planning to switch to LED, we recommend paying attention to the headlights MORIMOTO with already installed projection modules. They are certified and do not require modifications, unlike the Chinese “no-name” options.

Step-by-step instructions for replacing headlights on Murano Z51

Replacing the headlight with Murano Z51 takes about 1–1.5 hours per side. You will need:

  • 🔧 Socket wrench on 10 mm
  • 🔧 Screwdriver with Phillips bit PH2
  • 🧤 Gloves (to avoid leaving fingerprints on the glass)
  • 🔋 Multimeter for checking contacts

Algorithm of actions:

  1. Disconnect the negative terminal of the battery (required!).
  2. Remove the front bumper: unscrew the 4 bolts from below (10 mm) and 6 screws on the sides (PH2).
  3. Disconnect the headlight power connector by pressing the latch.
  4. Unscrew the 3 bolts securing the headlight to the body (10 mm).
  5. Carefully remove the headlight by pulling it towards you.

Battery terminal disconnected

Removed plastic bumper clips

Checked the connector contacts with a multimeter

New O-ring prepared (if required)

-->

⚠️ Attention: When installing a new headlight, do not touch the glass with bare hands - grease marks will lead to clouding. Use alcohol wipes for cleaning.

After replacement, be sure to perform light adjustment at the stand. Even original headlights may require adjustments due to differences in body position.

Headlight tuning: LED, xenon and legal nuances

Optics modernization Murano Z51 - a popular direction, but with legal restrictions. Let's look at the main options:

1. Installing LED lamps in halogen headlights

Technically possible, but illegal in Russia and the EU. Problems:

  • 🚨 Blinds oncoming drivers due to the wrong light beam
  • 📜 Does not pass technical inspection (no certificate ECE R113)
  • 🔥 Reflector overheating (risk of melting)

If you still decide to install, choose lamps with built-in driver and a radiator, for example:

  • 💡 Philips X-tremeUltinon (12972BWX2)
  • 💡 Osram LEDriving HL (64210CWX2)

2. Complete replacement with certified LED headlights

The legal option is to buy headlights with markings ECE R113, for example:

  • 🔦 MORIMOTO XB LED (article MM-MUR-Z51-LED)
  • 🔦 Spec-D Tuning (article SD-MUR-Z51-LED)

Cost: from 60,000 to 120,000 rubles per pair. Re-flashing required BCM (body control unit) for correct operation DRL.

What happens if you install uncertified LED headlights?

When stopped by the traffic police, you face a fine Part 3 Art. 12.5 Code of Administrative Offenses of the Russian Federation (5000 ₽) for non-conformity of lighting devices. In addition, the insurance company may refuse to pay in case of an accident if the examination reveals non-standard optics. In Europe, fines reach 200–300 € + mandatory replacement of headlights.

3. Xenon (HID)

Installing xenon in Murano Z51 only possible with headlights with a lens (projection module). For halogen headlights this is prohibited — the light beam will be scattered and blind oncoming traffic.

Legal kits:

  • 🔦 Philips Xenon HID (85122+) + ignition unit Philips Xenon Ballast
  • 🔦 Osram Xenarc Cool Blue Intense (66240CBI)
💡

Before purchasing a tuning kit, check it on the website Eurasian Economic Commission by certificate number. Legal kits always have documentation in Russian.

Common problems with Murano Z51 headlights and their solutions

Owners Murano Z51 We often encounter the following problems:

Problem Reason Solution
Cloudy headlight glass Oxidation of the inner coating due to moisture Polishing + sealing (silicone sealant Dow Corning 7091)
The low beam lamp is flashing Poor contact in the connector or burnt out spiral Cleaning the contacts + replacing the lamp (we recommend Osram Night Breaker)
Doesn't work DRL (running lights) Resistor burnt out or problem in the unit BCM Diagnostics CONSULT-III+ + replacement of resistor (article 28515-4M00A)
Condensation inside the headlight Ventilation valve clogged Drying the hair dryer + cleaning the valve (located in the lower part of the body)

⚠️ Attention: If an error appears after replacing a lamp or headlight Check Headlight System on the dashboard, errors must be reset via a diagnostic scanner. The error will not go away on its own!

To polish headlight glass, we recommend using a set 3M Headlight Restoration Kit (39045). It includes abrasive pastes and a protective coating that extends the effect up to 2 years.

How to improve headlights without tuning: practical tips

It is not always necessary to replace headlights or install LEDs. Here are proven ways to improve your light legally:

  1. Replacing lamps with brighter halogen ones:
    • 🔦 Osram Night Breaker Laser (+150% light, article number 64193NBL)
    • 🔦 Philips RacingVision GT200 (+200% light, article number 12972RVS2)

The service life of such lamps is less than standard ones (about 300 hours), but the luminous flux is much better.

  • Tilt angle adjustment:

    Use the adjustment screws on the back of the headlight (marked with arrows). Optimal angle: 1.2–1.5% (can be checked on a bench or using a laser level).

  • Cleaning the reflector:

    Over time, the reflector fades. To restore use chrome plating spray (For example, Plasti Dip Chrome), but only after completely disassembling the headlight.

    • 💡

    Replacing lamps with more powerful ones (for example, from 55W to 100W) is prohibited by traffic regulations and leads to melting of the wiring. Use only certified standard wattage lamps.

    To check the effectiveness of the light after modifications, use lux meter (smartphone apps, e.g. Lux Light Meter, give an error of up to 30%, but allow you to compare “before” and “after”).

    Where to buy headlights and components for Murano Z51

    When choosing a place of purchase, focus on:

    • 🛒 Official dealers Nissan - guarantee of original spare parts, but high price.
    • 🌍 Foreign online stores:
      • Amazon (delivery 2-4 weeks, duties may apply)
      • eBay (risk of running into a fake, check the seller's rating)
      • JapanParts (specializes in Japanese cars, original articles)
    • 🏬 Russian stores:
      • Exist.ru (wide range of analogues)
      • Autodoc.ru (convenient selection by VIN)
      • Zapchasti.ru (there are often promotions on headlights TYC And DEPO)

    Tip: when ordering from Amazon or eBay check with the seller whether the headlight is suitable for left-hand traffic (for Russia). Many American headlights have an asymmetrical light beam that does not match GOST R 51709-2001.

    To check the originality of the spare part, ask the seller for a photo:

    • 🏷️ Labels with article number and production date
    • 🔍 Logo Stanley Electric on the inside of the case
    • 📄 Certificate of Conformity (for LED headlights)

    FAQ: Frequently asked questions about Nissan Murano Z51 headlights

    Can headlights from a Murano Z52 be installed on a Z51?

    No, headlights Murano Z52 (2023+) are not compatible with Z51 due to modified mounting and connection connectors. In addition, Z52 uses all-LED optics with a different control system.

    What lamp color temperature is best for halogen headlights?

    Optimal range - 4000–4300K (white light with a slight yellow tint). Lamps with temperature 5000K+ They give a cold bluish light, which is less able to penetrate fog and rain. For Murano Z51 we recommend:

    • 🔦 Osram Cool Blue Intense (4200K)
    • 🔦 Philips WhiteVision (4000K)
    Do I need to remove the bumper to replace the low beam bulb?

    No, to replace a bulb in a halogen headlight Murano Z51 There is no need to remove the bumper. Enough:

    1. Open the hood.
    2. Remove the rubber plug on the back of the headlight.
    3. Disconnect the power connector.
    4. Turn the lamp counterclockwise and remove it.

    ⚠️ Do not touch the bulb of the new lamp - use gloves or a napkin.

    What should I do if the turn signal does not work after replacing the headlight?

    The problem is most often associated with:

    1. Incorrect connector connection (check polarity).
    2. Blown fuse F37 (10A) in the block under the hood.
    3. Damage to the wire in the corrugation between the headlight and the body.

    For diagnostics, use a multimeter in dial mode. If the problem is not resolved, a block check is required BCM at the service station.

    Is it possible to polish the Murano Z51 headlights without disassembling them?

    Yes, but the effect will be temporary (3-6 months). For long-term results:

    1. Remove the headlight from the car.
    2. Disassemble it (heat the body with a hairdryer to separate the glass from the sealant).
    3. Polish the glass and reflector.
    4. Apply a protective coating (eg 3M Clear Bra).
    5. Reassemble the headlight with new sealant.

    Use the kit without disassembly Sylvania Headlight Restoration Kit, but the procedure will have to be repeated every 4–5 months.