Nissan Bluebird Sylphy headlights: how to choose, replace and improve lighting

Nissan Bluebird Sylphy is a popular sedan that is valued for its reliability and comfort. However, over time, even the best quality cars wear out lighting elements. Headlights not only provide security on the road, but also shape the appearance of the car. In this article we will look at everything you need to know about headlights. Sylphy: from choosing original and non-original options to step-by-step replacement and tuning.

Feature of the model - different generations have different types of headlights. For example, B17 (2012–2019) was equipped with halogen headlights with separate turn signals, and the restyled version B18 (2020+) received an updated design with the ability to install LED optics. We'll look at each modification in detail so you can make an informed choice.

Types of headlights on Nissan Bluebird Sylphy: halogen, xenon or LED?

The choice of lighting type depends on the generation of the car, budget and driver preferences. Let's look at the pros and cons of each option:

• 🔦 Halogen headlights - standard solution for most Sylphy. They are cheap to replace, but have poor light transmission (especially in the rain) and a short service life (1–2 years). Suitable for budget renovations.
• ⚡ Xenon headlights — brighter than halogen by 200–300%, but require the installation of ignition units. On B17 you can install xenon in standard reflectors (with a corrector), but for B18 will need some work.
• 💡 LED headlights — a modern solution with a long service life (up to 5 years) and minimal energy consumption. However, the original LED modules for Sylphy They are expensive, and non-original ones can blind oncoming drivers.

It is important to consider that starting in 2020 (model B18), Nissan officially offers LED optics in top trim levels. If your car is older, the wiring will need to be modified or the entire headlight replaced.

Headlight type	Service life	Brightness (lumens)	Cost (per set)	Difficulty of installation
Halogen (H7/H11)	1–2 years	1 000–1 500	1 500–4 000 ₽	Easy
Xenon (D2S/D2R)	3–4 years	3 000–3 500	8 000–15 000 ₽	Medium (needs a proofreader)
LED (original)	5+ years	4 000–5 000	20 000–40 000 ₽	Difficult (requires firmware)
LED (not original)	2–3 years	2 500–3 500	5 000–12 000 ₽	Average (errors are possible)

If you are planning on switching from halogen to xenon or LED, be sure to check compatibility with the on-board computer. On some Sylphy after 2018, when installing non-standard lamps, an error may light up Check Light System.

Original headlight articles for Nissan Bluebird Sylphy

When purchasing spare parts, it is important to know the exact part numbers to avoid mistakes. Below are the original numbers for different generations and lighting sides:

• 🔴 Right headlight (passenger side):
• B17 (2012–2019): 26010-4M00A (halogen)
• B18 (2020–present): 26010-4M01A (halogen) / 26010-4M02A (LED)
• 🔵 Left headlight (driver's side):
• B17 (2012–2019): 26060-4M00A (halogen)
• B18 (2020–present): 26060-4M01A (halogen) / 26060-4M02A (LED)

Please note: headlights for Sylphy with automatic corrector have other articles. For example, for B17 with the system AFS (adaptive lighting) the right headlight will have a number 26010-4M00B.

⚠️ Attention: When purchasing used headlights, check that all fasteners and connectors are present. Often at disassembly sites they sell optics without turn signals or with damaged latches, which will complicate installation.

If original headlights are too expensive, you can consider high-quality analogues from brands: TYC, Depo, Hella or Koito. For example, a headlight from TYC for B17 will cost 8,000–10,000 ₽ per pair, which is 2–3 times cheaper than the original.

Step-by-step instructions for replacing headlights on a Nissan Bluebird Sylphy

Replacing the headlight with Sylphy does not require special skills, but will require accuracy. Let's look at the process using an example B17 (2012–2019). For B18 The algorithm is similar, but the bumper mounting may differ.

Required tools:

• 🔧 Phillips screwdriver (PH2)
• 🔧 10 mm socket wrench
• 🧤 Gloves (to avoid leaving fingerprints on the glass)
• 🔦 Flashlight for illuminating fastenings

Procedure:

1. Open the hood and disconnect the battery terminal (minus).
2. Remove the front bumper (unscrew the 4 bolts at the top and 2 at the bottom, then carefully pull it towards you).
3. Disconnect the power connector from the headlight by pressing the latch.
4. Unscrew the 3 headlight mounting bolts (two on top, one on bottom).
5. Carefully remove the headlight from the groove without pulling the wires.
6. Install the new headlight and reassemble everything in reverse order.

On B18 (2020+) additional may be required error reset via a diagnostic scanner (for example, Launch X431), if non-original LED modules are installed.

⚠️ Attention: When replacing a headlight with Sylphy with the system AFS (adaptive light) be sure to calibrate. Otherwise, the light beam will shine upward or sideways, blinding oncoming drivers.

Headlight tuning: tinting, angel eyes and LED modules

Many owners Nissan Bluebird Sylphy want to make their car stand out by improving the appearance of the headlights. Let's consider popular tuning options:

• 🎨 Window tinting - the most budgetary method (from 1,000 ₽). Use vinyl films with a light transmittance of at least 70%, otherwise the lighting will deteriorate.
• 👼 Angel eyes — LED rings around the lamps. For Sylphy kits fit on H7/H11 with size control.
• 🔥 LED modules in the reflector - a bright solution, but requires improvement. For example, modules Morimoto 2Stroke give clear light and shade, but may require BC firmware.
• 🔄 Black entrails — painting the reflectors matte black (only for unused headlights or under LED).

On B18 (2020+) models, installing non-standard LED modules in halogen headlights can lead to overheating and melting of the plastic. In this case, it is better to buy original LED optics or modify the cooling system.

Example of successful tuning: Installation of angel eyes + tinting 80% on B17 will cost 3,000–5,000 rubles. To do this you will need:

1. Buy LED rings at H7 (For example, Oracle Lighting).

2. Apply tint film 3M on the outer glass.

3. Connect the eyes to the dimensions via a relay.

What happens if you install cheap LED lamps in a halogen headlight?

Cheap LED lamps (for example, for 1,000 ₽) have an incorrect light beam, blind oncoming drivers and can cause an error CanBus>. In addition, due to poor cooling, they quickly degrade, losing up to 50% of their brightness per year.

Common problems with headlights on Nissan Bluebird Sylphy and their solutions

Even high-quality optics fail over time. Let's look at typical faults and how to fix them:

Problem	Reason	Solution	Repair cost
The headlight doesn't light up	The lamp has burned out or the contacts have oxidized	Replace the lamp, clean the connector	500–2 000 ₽
The light is dim, yellowish	Cloudy glass or reflector degradation	Polishing or replacing headlights	1 500–10 000 ₽
Error Check Light System	Incompatible lamp or open circuit	Install a canbus adapter or original lamp	300–1 500 ₽
Water inside the headlight	Crack in glass or leakage of seal	Replacing headlights or sealing with silicone	3 000–15 000 ₽

If the icon on the dashboard lights up ! in the yellow triangle, this may indicate malfunction in the lighting circuit. In this case, check:

• Integrity of fuses (F35 And F36 in the block under the hood).
• Light relay status (R12).
• Presence of voltage at the headlight connector (should be 12–14 V).

On B18 (2020+) lighting errors are often associated with incorrect operation of the light sensor (located on the windshield). Replacing it will cost 2,000–4,000 rubles.

💡

If after replacing the lamp the headlight still does not work, check the ground on the body. On Sylphy it often oxidizes near the left pillar.

Comparison of headlights for different generations of Nissan Bluebird Sylphy

Nissan Bluebird Sylphy was produced in two main generations - B17 (2012–2019) and B18 (2020–present), which have fundamental differences in optics. Let's look at them in more detail:

B17 (2012–2019):

• 🔹 Halogen headlights with lamps H7 (near) and H1 (distant).
• 🔹 Separate turn signals with lamps PY21W.
• 🔹 It is possible to install xenon in standard reflectors (a corrector is required).
• 🔹 The headlight glass often becomes cloudy after 3-4 years of operation.

B18 (2020–present):

• 🔹 Top trim levels include full LED headlights with adaptive light.
• 🔹 Low/high beam lamps - H11 And HB3 accordingly.
• 🔹 Turn signals are integrated into the headlight (lamp WY5W).
• 🔹 The headlight control unit is connected to BCM (body module).

If you are planning update optics on an old model, you can consider installing headlights from B18. However this will require:

1. Replacing the front bumper (mountings are different).
2. Modifications to the wiring for the new connector.
3. Firmware BCM for correct operation of lighting functions.

The cost of such an upgrade will be 40 000–60 000 ₽, but the result will live up to expectations - modern design and improved lighting.

Where to buy headlights for Nissan Bluebird Sylphy: original vs analogues

The choice of where to buy depends on your budget and quality requirements. Let's look at the main options:

• 🏢 Official dealer - guarantee of original spare parts, but prices are too high (a headlight costs 15,000–25,000 ₽). Suitable for new vehicles under warranty.
• 🛒 Online stores (For example, Exist.ru, Autodoc) - a wide selection of analogues at prices 30–50% lower than the original. Delivery time is 3–7 days.
• 🔄 Showdown — you can find used headlights in good condition for 5,000–10,000 ₽. There is a risk of running into broken optics or counterfeits.
• 🇨🇳 AliExpress/TaoBao - cheap Chinese analogues (from 3,000 ₽), but the quality is often poor. Suitable for temporary replacement.

When purchasing, pay attention to:

1. Availability of certificate (For example, ECE R112 for LED).
2. Guarantee (good stores give 1–2 years).
3. Complete set (the box must contain all fasteners and seals).

If you are looking budget but high quality analogue, pay attention to the brands: TYC (Japan) Depo (Taiwan) or Hella (Germany). Their headlights are almost as good as the originals, but cost 1.5–2 times less.

💡

Before purchasing a disassembled headlight, ask the seller to send a photo of the inside of the reflector. Often there are visible signs of repair or corrosion.

FAQ: Frequently asked questions about Nissan Bluebird Sylphy headlights

Is it possible to install xenon in Sylphy halogen headlights without modifications?

No, installing xenon in standard halogen headlights B17 requires:

• Installation of ignition blocks.
• Automatic corrector settings (mandatory according to GOST).
• Light beam settings on the stand.

Without a corrector, xenon will blind oncoming drivers, which can result in a fine (Article 12.5 of the Administrative Code - 500 ₽).

What low beam lamps are on the Sylphy B18 (2020+)?

On B18 halogen headlights use a bulb H11 (near/far). The LED version contains original modules Nissan with article number 26150-4M02A (right) and 26155-4M02A (left).

How to remove the headlight on Sylphy without removing the bumper?

Technically this is possible, but extremely inconvenient. You will need:

1. Unscrew the headlight mounting bolts from the engine compartment.
2. Bend the fender liner (with a 10 mm socket wrench).
3. Carefully pull the headlight out through the gap between the bumper and the fender.

Risk of damaging bumper clips or scratching paint. We recommend removing the bumper.

Why does the light blink after replacing the lamp?

This is a common problem when installing LED bulbs in halogen headlights. Reasons:

• Missing canbus adapter (needed to stabilize the current).
• Poor contact in the connector (oxidation or wire break).
• Poor quality lamp (for example, without stabilization driver).

Solution: install an adapter CanBus or return halogen lamps.

Is it possible to polish cloudy Sylphy headlights at home?

Yes, for this you will need:

1. Sandpaper P800 → P1200 → P2000.
2. Plastic polish (eg 3M 39008).
3. Protective varnish (to prolong the effect).

The process will take 1–2 hours. After polishing, the headlights will be as good as new, but the effect will last 6-12 months.