Eleaf iStick Pico Plus 75W is an updated version of the legendary line of compact box mods, which combines the power of up to 75 W, battery support 18650 and convenient form factor. The model became a response to the requests of vapers who lacked the power of previous versions (iStick Pico 25W And 40W), but compact size and ease of use are important. In this guide, we will take the device apart: from technical characteristics to operating nuances, compare it with competitors and give recommendations on the choice of components.

Why Pico Plus 75W deserves attention? Firstly, this is one of the few box mods in its class that supports TC mode (temperature control) for nickel, titanium and stainless steel. Secondly, it is implemented here protection against overheating, short circuit and deep discharge — safety-critical functions. Finally, the device is compatible with resistance atomizers from 0.1 Ohm, which opens up wide opportunities for experiments with vaping.

The article will be useful for both beginners who are choosing their first box mod and experienced vapers looking for a backup device. We will not praise or scold the model - only facts, tests and practical advice. Let's start with the technical specifications!

Technical specifications of Eleaf iStick Pico Plus 75W

Let's look at the "filling" of the device point by point. Pico Plus 75W is positioned as a universal box mod for everyday use, and its parameters confirm this:

  • 🔋 Battery: 1 × 18650 (not included, models with discharge current from 20A)
  • ⚡ Power: 1–75 W (in increments of adjustment 0.1 W)
  • 🌡️ Vaping modes: VW (variable power), TC (Ni/Ti/SS), TCR (manual temperature coefficient adjustment)
  • 📏 Dimensions: 70 × 45 × 25 mm (weight - 120 g without battery)
  • 🔌 Connector: 510 pin with spring contact (supports atomizers up to diameter 24 mm without overhang)
  • 📱 Display: OLED screen 0.91" with display of basic parameters (resistance, voltage, power, battery charge)

Deserves special attention chipset, which Eleaf developed specifically for this model. Unlike budget analogues, it implements smooth power adjustment without "steps" and delays. The chip also supports firmware update via USB port (official versions are posted on the manufacturer’s website).

It is important to note that despite the compact size, Pico Plus 75W is able to work with subohm atomizers due to the low minimum resistance (0.1 Ohm). This makes it a versatile vaping tool for both standard clearomizers and drippers.

💡

If you plan to use a device with atomizers with lower resistance 0.2 Ohm, choose a battery with a discharge current of at least 25A (For example, Sony VTC5A or Samsung 25R).

Contents and appearance: what's in the box?

Standard equipment Eleaf iStick Pico Plus 75W includes:

  • 📦 The box mod itself (black, silver, rainbow or camouflage version)
  • 🔌 USB cable Micro-USB for charging and firmware update
  • 📄 Instructions in several languages (including Russian)
  • 🔧 Screwdriver for adjusting the 510th pin (if adjustment to the atomizer is required)
  • 🔋 Attention: battery 18650 not included!

The design of the device is made in a minimalist style: glossy or matte finish (depending on color), rounded shapes and a single button Fire with backlight. On the front panel there are:

  • 🔄 Power adjustment buttons (+/−)
  • 📺 OLED display with information about current settings
  • 🔌 Port Micro-USB (for charging and software updates)

One of the advantages is ergonomics: the device fits comfortably in the hand, button Fire positioned so that it is easy to press with your thumb. However, the glossy finish quickly becomes covered with fingerprints, so many users have to buy an additional case or skin.

📊 Which color of Eleaf iStick Pico Plus 75W do you like best?
  • Matte black
  • Silver
  • Rainbow
  • Camouflage
  • Other

How to use Eleaf iStick Pico Plus 75W: step by step instructions

If you're new to vaping, your first steps with a new device can be daunting. Let's look at the basic operations:

  1. Battery Installation:

    Unscrew the bottom cover (counterclockwise), insert the battery 18650 positive contact up. Make sure the contacts are not dirty or deformed. Using damaged batteries may cause a short circuit!

  2. Turn on/off:

    Quickly press the button Fire 5 times in a row. When turned on, the Eleaf logo will appear on the screen, followed by the current settings.

  3. Power adjustment:

    Buttons +/− set the desired value (from 1 W to 75 W). In TC mode, temperature setting is also available (range: 100–315°C).

  4. Changing the vaping mode:

    Press the button three times Fire — the screen will cycle cyclically: VW → TC-Ni → TC-Ti → TC-SS → TCR.

To reset the puff counter, hold down the buttons + And − simultaneously during 3 seconds. This is useful if you want to track the life of the coil in the atomizer.

☑️ Preparation for first use

Done: 0 / 4

Attention: If the device does not turn on after installing the battery, check:

  • 🔋 Correct installation of the battery (contacts must fit tightly).
  • 🔌 Clean the contacts on the mod and the battery (wipe with alcohol if necessary).
  • 📉 Battery charge level (if lower 3.2V, may not be enough to start).

Comparison with other models of the iStick Pico line

Than Pico Plus 75W different from previous versions? Let's compare the key parameters in the table:

Model Power Battery Modes Max. atomizer diameter Weight
iStick Pico 25W 1–25 W Built-in 1300 mAh VW, Bypass 22 mm 100 g
iStick Pico 40W 1–40 W Built-in 2300 mAh VW, TC-Ni 22 mm 110 g
iStick Pico 75W (original) 1–75 W 18650 (removable) VW, TC-Ni/Ti/SS 24 mm 120 g
iStick Pico Plus 75W 1–75 W 18650 (removable) VW, TC-Ni/Ti/SS, TCR 24 mm 120 g
iStick Pico 21700 1–100 W 21700 (removable) VW, TC-Ni/Ti/SS, TCR 25 mm 150 g

Main advantages Pico Plus 75W before iStick Pico 75W (first version):

  • ✅ Added TCR mode for fine-tuning temperature control.
  • ✅ Improved chipset with more accurate power stabilization.
  • ✅ Optimized menu with easy navigation.

However, if you need high power (up to 100 W), worth considering iStick Pico 21700 - it supports batteries of the format 21700 and has a more capacious battery.

💡

If you float on the resistances above 0.3 ohm, the differences between Pico Plus 75W And Pico 21700 you won't feel it. But for subohm vaping, it is better to choose a model with a power reserve.

What batteries are suitable for Eleaf iStick Pico Plus 75W?

The choice of battery determines not only the battery life, but also security devices. Pico Plus 75W Only compatible with format batteries 18650, but not all models will fit. Here are the key criteria:

  • 🔋 Capacity: optimal 2500–3500 mAh (For example, Samsung 30Q or LG HG2).
  • ⚡ Discharge current: no less 20A (for subohm vaping - 25A+).
  • 🔍 Protection: original batteries from trusted brands (Sony, Samsung, LG, Molicel).

Let's look at the popular options in the table:

Battery model Capacity Max. discharge current Recommendations for use
Samsung 25R 2500 mAh 20A Suitable for vaping up to 50 W at higher resistances 0.25 Ohm.
Sony VTC5A 2600 mAh 25A Optimal for subohm vaping (0.15–0.3 Ohm) at power up to 75 W.
LG HG2 3000 mAh 20A Good balance of capacity and current. Not recommended for resistances below 0.2 Ohm.
Molicel P26A 2600 mAh 35A Best choice for extreme vaping (high power, low resistance).

Attention: Never use batteries with a damaged casing or without a protective circuit! Also avoid cheap no-name batteries - they may not meet the declared characteristics and cause overheating or explosion.

What happens if you use a battery with insufficient discharge current?

If the permissible discharge current is exceeded, the battery overheats, which can lead to swelling or even fire. For example, if you are floating on 0.15 Ohm at 70 W, the discharge current reaches ~18A. Battery with limit 10A will not withstand such a load.

Common problems and their solutions

Even reliable devices sometimes fail. Here are the typical problems Eleaf iStick Pico Plus 75W and ways to eliminate them:

  • 🔥 "Check Atomizer" (atomizer error):

    Reasons: poor contact of the 510th pin, short circuit in the spiral or lower resistance 0.1 Ohm. Solution: check the tightness of the atomizer, clean the contacts, replace the coil.

  • 🔋 "Low Battery" when the battery is charged:

    The battery contacts may have oxidized or the battery has lost capacity. Try cleaning the contacts with alcohol or replacing the battery.

  • 🌡️ TC mode does not work:

    Make sure the coil is installed in a supported material (Ni/Ti/SS) and the temperature coefficient is set correctly (for stainless steel - 0.00092).

  • 📉 Spontaneous reduction in power:

    This may be due to the chipset overheating. Allow the device to cool down or reduce power.

If the device does not turn on after being dropped or exposed to liquid, do not try to disassemble it yourself — contact the service center. There are sensitive elements inside that can be easily damaged.

💡

To clean the contacts of the 510th pin, use a cotton swab dipped in isopropyl alcohol. Do not use abrasive materials (such as sandpaper) - this will damage the coating!

Alternatives to Eleaf iStick Pico Plus 75W: what to choose?

If Pico Plus 75W does not fully meet your requirements, consider analogues:

  • 🔥 VooPoo Drag Mini:

    Power up to 117 W, battery support 18650, chipset GENE.Fan with precise stabilization. Minus - larger dimensions.

  • 💎 GeekVape Aegis Mini:

    Impact-resistant housing (IP67), power up to 80 W, built-in battery 2200 mAh. Ideal for an active lifestyle.

  • ⚡ Smok RPM 80:

    Hybrid box mod and sub-system, power up to 80 W, built-in battery 3000 mAh. Suitable for beginners.

  • 🔋 Wismec Predator 228W:

    Two batteries 18650, power up to 228 W, but the dimensions and weight are much larger.

Let's compare the key parameters in the table:

Model Power Battery Features Price (approx.)
Eleaf iStick Pico Plus 75W 75 W 18650 (removable) Compact, TCR, TC support ~3500 rub.
VooPoo Drag Mini 117 W 18650 GENE.Fan chipset, bright design ~4500 rub.
GeekVape Aegis Mini 80 W Built-in 2200 mAh Impact resistance, dust and moisture protection ~4000 rub.

Conclusion: Pico Plus 75W outperforms competitors in terms of ratio compactness/power/price. If you need additional features (such as moisture protection or more power), take a look at Aegis Mini or Drag Mini.

FAQ: answers to popular questions

❓ Is it possible to charge the battery without removing it from the device?

Yes, Eleaf iStick Pico Plus 75W supports port charging Micro-USB. However, to extend battery life, it is recommended to use an external charger (such as Nitecore D2 or Xtar VC2). Charging through the mod is slower and can lead to overheating.

❓ Why does the device heat up when vaping?

Heating can be caused by:

  • Using power close to maximum (70–75 W).
  • Low spiral resistance (<0.2 ohm) at high power.
  • Poor contact between battery and mod.

Solution: Reduce power, check connections, or allow device to cool.

❓ How to update the firmware?

The firmware update is performed through the official Eleaf website:

  1. Download the latest firmware for iStick Pico Plus 75W.
  2. Connect your device to your PC via Micro-USB.
  3. Run the firmware file (usually with the extension .exe).
  4. Follow the instructions on the screen (do not disable the mod until the process is complete!).

Attention: Interrupting the update can lead to bricking of the device!

❓ Which atomizers are best suited for this model?

Recommended options:

  • 💨 Eleaf Melo 4 — universal clearomizer with adjustable air flow.
  • 🔥 GeekVape Zeus X - for lovers of rich taste (RTA).
  • ⚡ Wotofo Profile - for subohm vaping at power 60–75 W.
❓ How long does the charge last during active vaping?

Battery life depends on:

  • Battery capacity (for example, Samsung 30Q will last longer than LG HG2 with the same settings).
  • Power: at 30–40 W The battery will be discharged in 6–8 hours, if 70–75 W - in 3–4 hours.
  • Spiral resistance: the lower the resistance, the faster the battery drains.