Crossover owners Nissan Murano second generation (Z51 body) are often faced with the problem of selecting effective windshield wipers. The original mounting configuration and specific geometry of the windshield require a special approach when choosing consumables. An incorrectly selected size or type of mount can result in wipers hitting the glass, leaving streaks, or not cleaning the entire usable area at all.
To ensure maximum driving safety in rain or snow, it is necessary to take into account the technical nuances of the car's design. In this article, we will look at the exact sizes of brushes, popular alternatives to original spare parts, and a step-by-step replacement algorithm that will help you do the job yourself without contacting service.
Exact dimensions and mounting features of Murano Z51 windshield wipers
The first thing you need to do before purchasing is to determine the correct dimensions for each side of the car. Constructors Nissan They provided for an asymmetrical arrangement of the levers, so the length of the brushes on the left and right is different. The Z51 comes standard with 26-inch (650 mm) front wipers on the driver's side and 19-inch (480 mm) on the passenger's side. The rear wiper is 14 inches (350 mm) long.
Particular attention should be paid to the type of fastening, as this is the most common source of errors when purchasing. In the model Murano Z51 a specific type of fastening is used, known as a "gachi" or side hook with an additional lock. Many universal brushes simply do not fit the shape, or require the use of adapters, which reduce the reliability of the design. If you choose an incompatible type, the brush may fly off at high speed.
The rear wiper also has its own characteristics. It is attached to the lever through a special plastic adapter, which often breaks during rough removal. It is important to remember that standard frameless brushes from passenger sedans cannot be used for the rear axle without checking the compatibility of the adapter.
- 🚗 Driver's front wiper: 650 mm (26 inches)
- 🚙 Front passenger wiper: 480 mm (19 inches)
- 🚘 Rear wiper: 350 mm (14 inches)
⚠️ Warning: Do not attempt to use 24" long windshield wipers on the driver's side instead of the stock 26" ones. This will significantly reduce the cleaning area and create a “dead zone” on the right side of the windshield, which is critical when turning right.
- Frame
- Frameless
- Hybrid
- Original
Original spare parts versus analogues: what to choose?
When choosing windshield wipers for Nissan Murano owners have two main options: purchasing original branded parts Nissan or purchasing high-quality analogues from well-known global manufacturers. The original wipers (articles 28890-ZZ01A and 28890-4BA0A) provide a perfect fit, as they are manufactured at the partner factory, taking into account all tolerances. However, their service life often does not exceed one season, and the cost per set can be quite high.
Analogues from brands such as Bosch, Denso or Trico, often surpass the original in terms of rubber durability and stability in cold weather. For example, series Bosch Aerotwin offers a frameless design that fits better against curved glass Murano and does not freeze in winter. It is important to choose the right mounting adapters, since analogue manufacturers usually include several types of adapters in the kit.
Hybrid wipers are the golden mean. They combine the aerodynamics of frameless brushes and the reliability of a frame, which allows them to operate efficiently at high speeds without windage. For a crossover that is often used in a mixed cycle, hybrid models from Champion or Valeo could be a great solution.
| Brand | Type | Service life (months) | Features |
|---|---|---|---|
| Nissan (Original) | Frame | 6-8 | Ideal geometry, high price |
| Bosch Aerotwin | Frameless | 12-15 | Quiet, excellent cleaning, difficult replacement |
| Denso | Hybrid | 10-12 | Reliability, adaptation to frost |
| Trico | Frameless | 12-14 | Adapter included, good quality |
☑️ Choice of wipers
Instructions for removing and installing windshield wipers
The process of replacing wipers Nissan Murano Z51 has its own nuances that distinguish it from other cars. The main difficulty lies in the fragile plastic retainer on the lever and the need to properly fix the lever when removing it. Start by lifting the windshield wiper arm perpendicular to the glass. Turn on the “Service” mode (if it is provided in your configuration) or carefully hold the lever so that it does not hit the glass when turning it off.
To remove the brush, press the locking tab located on the base of the mount. This action requires a certain force, but it must be done sharply and clearly. Pull the brush down along the lever until it comes free. Be extremely careful: place a soft rag under the lever so that if it is accidentally released it does not break the windshield, since the spring of the lever is very powerful.
Installing a new brush is done in the reverse order. Direct the fastening groove onto the hook of the lever and press until it clicks. Make sure the latch is completely closed. After this, lower the brush onto the glass. If you use blades with adapters, make sure they are firmly secured inside the new rubber housing, otherwise they may fly off when you turn on the wipers.
What to do if the latch is stuck?
If the latch tab does not press, try slightly rocking the brush up and down while pressing the latch. Do not use excessive force to avoid breaking the plastic mechanism.
The rear wiper is removed in the same way, but requires care with the plastic cap that covers the nut securing the arm. If you are changing only the rubber and not the entire mechanism, follow the manufacturer's instructions, since disassembling the rear wiper arm is not recommended without special experience.
- 🛠️ Use a soft backing under the lever to protect the glass
- 🔧 Press the lock and pull the brush along the lever
- ✅ Check the fit of the new adapter before lowering
⚠️ Caution: Never lower the metal windshield wiper arm onto a dry windshield without the blade installed. This is guaranteed to lead to chips and cracks in the glass, the repair of which will be very expensive.
Correctly fixing the lever with a rag during removal is the key to ensuring there are no chips on the Nissan Murano Z51 windshield.
How to extend the life of your windshield wipers
Even the most expensive and high-quality brushes can quickly become unusable if you do not follow the operating instructions. The main reason for premature tire wear is working on dry glass. Before turning on the wipers, be sure to make sure there is enough washer fluid on the glass. In winter, when the glass is covered with ice or frost, turning on the wipers “dry” will lead to instant wear of the working edge.
Regular cleaning of the brushes themselves is also critical. Dirt, soot from exhaust gases and reagents accumulate on the rubber and act as an abrasive, scratching the glass. Wipe down the blade edges with a damp cloth every couple of weeks or after every major trail ride. This is a simple procedure that can increase the life of your wipers by 30-40%.
In winter, before driving, be sure to clear the glass of snow and ice with an ice scraper. If ice remains under the brushes, it can deform the rubber profile or even break the mechanism. Also, try not to turn on your windshield wipers until the glass is completely clear of ice, even if the ice appears to be thin.
Before the onset of winter, treat the working edge of the rubber with silicone grease or a specialized conditioner for wipers. This will prevent freezing and prolong the elasticity of the rubber.
Do not use summer washer fluid in winter. It will freeze in the tank and on the glass, turning into an icy mess that the wipers cannot move. Use only antifreeze fluid that is suitable for current temperatures and check the level regularly.
Problems with pressure and glass cleanliness
If the wipers leave streaks or stains even on new glass, the problem may not be in the blades themselves, but in the geometry of the lever pressure. On Murano Z51 Over time, the arm spring can weaken, causing the blade to not adhere to the curved surface of the glass at the top or bottom. In this case, you may need to slightly adjust the angle of the lever, but this must be done very carefully.
Another common cause of stains is glass contamination. Even if the glass appears clean, there may be a thin film of oil or silicone on it. Ordinary water cannot cope with such dirt. Use special car glass cleaners that remove grease film. Common household products may leave streaks or damage the hydrophobic coating.
It is also worth paying attention to the condition of the glass itself. Microscopic scratches and sand marks can prevent the rubber from sealing tightly. In such cases, glass polishing with professional pastes helps, but this is a procedure that requires equipment and skills.
Article table of popular brands for Murano Z51
To make it easier to find and buy the right parts, we have compiled a table with the most popular items. Please note that in some cases the article number may differ depending on the year of manufacture of the vehicle and the region of delivery. Always check the length and type of fastener before ordering.
| Brand | Driver (26") | Passenger (19") | Rear (14") |
|---|---|---|---|
| Nissan | 28890-ZZ01A | 28890-4BA0A | 28890-1AA0A |
| Bosch Aerotwin | 3397010748 | 3397010746 | 3397010767 |
| Denso | DU-065L | DU-048L | DU-035L |
| Valeo | 574295 | 574292 | 574290 |
⚠️ Attention: When ordering through online stores, always check the compatibility of a specific article with your VIN code, as in different batches Nissan Murano different types of fastenings could be used.
FAQ: Frequently asked questions about wipers for Nissan Murano Z51
Is it possible to install longer wipers than stock ones to clean more glass?
No, this is absolutely not recommended. Extended brushes will hit each other during operation, which will lead to their rapid failure, and can also catch on the body pillars or deform the arms.
How often do you need to change wipers on Murano Z51?
The recommended replacement interval is 6-12 months depending on operating conditions. If you see streaks, knocks or skips in operation, replacement is required immediately, regardless of the time of use.
Why did the rear wiper stop working after replacement?
Most often the problem is an incorrect connection or damage to the connector when removing the old wiper. It is also possible that the new adapter is not fully latched onto the lever and the mechanism is blocked.
What washer fluid is best for winter?
Use an antifreeze fluid with a freezing point 5-10 degrees lower than the current outside temperature. Avoid methanol-based mixtures, preferring ethylene glycol or isopropyl alcohol.
Is it possible to use frame wipers instead of frameless ones?
Yes, you can, if they have the appropriate type of fastening. However, frameless models usually provide a better fit to curved glass and quieter operation, so they are preferred for Murano.