Wipers for Nissan Almera G15: sizes, selection and replacement with your own hands

Windshield wipers may seem like a small thing, but driving safety directly depends on their condition. On Nissan Almera G15 (2012–2018) wipers work intensively, especially in rainy weather or in winter, when an ice crust forms on the windshield. Over time, the rubber wears out, streaks, squeaks and skips appear - all this impairs the view and distracts the driver.

In this article we will analyze exact dimensions of wipers for Almera G15, compare original parts with analogues, show how to replace them yourself (even without experience), and reveal the secret to extending the service life of brushes by 1.5–2 times. We’ll also answer frequently asked questions: why do new windshield wipers “jump” on the glass, is it possible to install frameless models, and how to avoid damage to the windshield during replacement.

Wiper wiper sizes for Nissan Almera G15: compatibility table

The first thing you need to know is brush length for Almera G15 depends on the year of manufacture and configuration. For example, machines with a system Rain Sensor (rain sensor) require brushes with a special mount. Below are the current sizes for all modifications:

Model/Year	Driver's side (cm)	Passenger side (cm)	Mounting type
Almera G15 2012–2015 (base)	60	40	Hook
Almera G15 2016–2018 (with rain sensor)	60	40	Hook + sensor adapter
Almera G15 restyling (2017–2018, Europa)	65	40	Hook or Side Pin

⚠️ Attention: If on your Almera G15 Wipers are installed with a length of 65 cm, but the table indicates 60 cm - do not rush to buy new ones. Perhaps the previous owner installed non-standard brushes. Check this by measuring them with a tape measure or comparing them with the original catalog numbers (see next section).

Also note windshield shape: y Almera G15 it has a significant bend at the edges. If you install brushes that are too long (for example, 65 cm instead of 60 cm), they will cling to plastic moldings or “ride up” at high speed.

Original wipers vs analogues: which is better for Almera G15?

Original brushes from Nissan (catalog numbers: 28560-BM40A for the driver's side and 28561-BM40A for passenger) are more expensive than analogues, but guarantee a perfect fit and long service life. However, many owners Almera G15 successfully use parts from other brands. Here's a comparison:

• 🔹 Original (Nissan): soft rubber, optimal fit, but price from 1,500 rubles. per set.
• 🔹 Bosch Aerotwin: frameless, quiet, but can “bounce” in the cold (solved by treating with silicone).
• 🔹 Denso Hybrid: Hybrid design, works well at −30°C, but requires an adapter to mount.
• 🔹 Champion EasyVision: budget option (from 600 rubles), but the rubber wears out after 6–8 months.

💡 Helpful tip: If you choose analogues, be sure to check fastening type. On Almera G15 most often used Hook 9x3 or Hook 9x4, but some brushes (for example, Valeo Silencio) are supplied with a universal adapter. When purchasing, check with the seller whether the model is suitable for your type of fastening.

Step-by-step instructions: how to replace wipers on Almera G15

Replacing brushes with Nissan Almera G15 takes no more than 10 minutes and requires no tools. The main thing is to act carefully so as not to damage the windshield or wiper mechanism. Follow the instructions:

1. Raise the wiper to the vertical position (perpendicular to the glass). On Almera G15 To do this, you need to turn on the ignition, press the wiper control lever and hold it in the “up” position until the brush is vertical. Then turn off the ignition.
2. Press the fastening latch (usually a plastic latch on the back of the brush) and slide it down to release it from the lever.
3. Remove the old brush and compare its mounting with the new one. If the adapters do not match, use the adapter included.
4. Install a new brushuntil you hear the latch click. Repeat for the second brush.

⚠️ Attention: Never use force when removing the brush! If it does not budge, check whether you pressed the latch correctly. On Almera G15 A common problem is when the fastener “sticks” - in this case, gently swing the brush left and right, do not pull it towards you.

Frequent problems with wipers on Almera G15 and how to solve them

Even after replacing the brushes, the owners Almera G15 face typical problems. Here are the most common ones and how to fix them:

• 🌧️ Wipers "jump" on the glass: the reason is glass contamination or rubber wear. Clean the glass isopropyl alcohol, and wash the brushes with warm water and soap. If that doesn't help, replace the brushes.
• ❄️ In winter, the brushes freeze to the glass: Before parking, raise them to a vertical position or treat them with silicone lubricant. Do not tear off frozen wipers by force - this can damage the mechanism!
• 🔊 Creak when working: Usually caused by sand getting between the brush and the glass. Wash the brushes and glass, polish the glass with paste if necessary. GOI.
• 🚫 Wipers do not return to their original position: This is a faulty gearbox or fuse. Check the fuse F30 (15A) in the block under the hood.

What to do if the wiper is stuck in the up position?

If after replacement the brush does not return to the horizontal position, check:

1. Correct installation (perhaps the brush is blocking the mechanism).

2. The condition of the lever spring - it could have jumped off or weakened.

3. Electrical: disconnect the wiper motor connector (located under the plastic protection under the hood) and check the voltage with a tester.

.

If the problem is not in the brushes, but in drive mechanism, diagnostics will be required. On Almera G15 often fails wiper gear motor (catalog number 28500-BM400). Replacing it will cost 3,000–5,000 rubles. with work, but you can save money by buying a used part at a disassembly site (check it before installation!).

How to extend the life of wipers: 5 proven methods

Average brush life Almera G15 — 6–12 months, but with proper care they can be used 2 times longer. Here's what really works:

1. Regular cleaning: Once a month, wash your brushes with warm water and soap to remove resins, dust and salt. Do not use aggressive detergents!
2. Lubrication: treat your tires before winter silicone grease (For example, WD-40 Specialist Silicone). This will prevent freezing and cracking.
3. Parking in the shade: under direct sunlight, the rubber of the brushes becomes tanned. If you don't have a garage, use sun screen for windshield.
4. Correct position: In winter, raise the wipers vertically to prevent them from becoming deformed under the snow.
5. Using winter brushes: If your region has harsh winters, install specialized brushes with graphite coating (For example, Bosch Winter).

⚠️ Attention: Never turn on the wipers if there is ice or snow on the glass! This leads to overload of the gear motor and its premature failure. Always clean the glass with a scraper before driving.

Frameless wipers on Almera G15: pros and cons

Frameless brushes (for example, Bosch Aerotwin or Valeo Silencio X-TRM) have become popular due to their stylish design and lower wind resistance. But are they suitable for Almera G15? Let's look at the pros and cons:

Benefits	Disadvantages
✅ Better aerodynamics (less noise at speed)	❌ Can “bounce” off glass at −20°C and below
✅ They last longer (the rubber wears out evenly)	❌ More expensive than frame ones by 30–50%
✅ Curved glass is easier to clean (relevant for Almera G15)	❌ It is more difficult to find a suitable adapter for mounting

If you decide to install frameless wipers, choose models with winter covering (For example, Bosch Aerotwin AR601S for the driver's side). They tolerate frost better, but still require care: treat them before winter silicone spray.

FAQ: answers to frequently asked questions about wipers on Almera G15

Is it possible to install wipers with a length of 65 cm instead of 60 cm?

No, this will cause the brushes to cling to the plastic moldings along the edges of the glass. On Almera G15 the maximum permissible length is 60 cm for the driver's side and 40 cm for the passenger side. The exception is the restyled versions of 2017–2018, where brushes of 65/40 cm were sometimes installed, but this is a non-standard solution.

Why do new wipers leave streaks?

The reasons may be different:

• 🧴 Glass is contaminated with resins or grease deposits (needs cleaning isopropyl alcohol).
• 🧽 New brushes have not “got used” - let them work for 10-15 minutes.
• 🔄 Poor quality tires (especially cheap analogues).

Also check the angle of the brushes - if they are installed crookedly, there will be streaks even on clean glass.

How to remove the wiper if the latch is broken?

If the fastening latch is broken, carefully pry the brush off with a flat-head screwdriver (after wrapping it with electrical tape so as not to scratch the glass). Then replace the mount or buy a new brush. On Almera G15 original latches are sold separately (catalog number 28562-BM40A).

What to do if the wipers work jerkily?

This is a sign of wear and tear gear motor or oxidation of contacts. Check the fuse first F30 (15A) and the motor connector (located under the plastic cover near the windshield). If the problem remains, the gearbox will need to be replaced (cost of part: ~4,000 rubles).

Can wipers from other Nissan models be installed?

Yes, but only if they match size and fastening. For example, brushes from Nissan Note (2012–2016) or Nissan Micra suitable for Almera G15, since they have the same mount Hook 9x3. However, it is better to use parts designed specifically for your model.