Nissan Almera Classic is one of the most popular foreign cars on the Russian secondary market, and the issue of selecting consumables for it is more relevant than ever. Windshield wipers (or windshield wiper blades) may seem like a small thing, but visibility in the rain, and therefore safety, depends on their quality. In this article we will analyze exact dimensions of wipers for Almera Classic (including restyled versions), nuances of choice and mistakes that 90% of owners make when purchasing.

Many people mistakenly believe that for all years of manufacture Almera Classic (2006–2018) the same brushes fit. In fact, dimensions may vary depending on body modification and configuration. We collected data from official catalogs Nissan, and also analyzed owner reviews to provide up-to-date information for 2026, taking into account available analogues.

Official wiper sizes for Almera Classic by year

Standard wiper blade sizes for Nissan Almera Classic (body B10 And N16) depend on the generation and body type (sedan or hatchback). Below is a table with official manufacturer data:

Generation/Years Body type Front wipers (driver/passenger) Rear wiper (if equipped)
Almera Classic B10
(2006–2012)		 Sedan 600 mm / 400 mm —
Almera Classic N16
(2012–2018, restyling)		 Sedan 650 mm / 400 mm —
Almera Classic (European version) Hatchback 600 mm / 400 mm 300 mm
Almera Classic (special configuration) Sedan with heated wiper area 650 mm / 420 mm* —

* - In some configurations with heated wiper rest zones, extended brushes were installed (420 mm instead of 400 mm). This is due to modification of the fastening. You can check the size visually or by VIN code through the service Nissan Parts.

⚠️ Attention: There are often counterfeits of original wipers on the market. Nissan with markings 28510-BM400 (driver) and 28511-BM400 (passenger). The original brushes have metal frame with plastic coating and the manufacturer's logo on the mount. Cheap analogues use only plastic, which leads to play and creaking during operation.

📊 What type of wipers do you prefer?
  • Frame
  • Frameless
  • Hybrid
  • I don't know what to choose

How to determine the size of wipers on your Almera Classic

If you are not sure about the size of the brushes on your car, there are several ways to find out:

  • 📏 Measure old wipers tape measure or ruler from edge to edge of the rubber part (without taking into account the fastening).
  • 🔍 View labeling on the back of the brush - often the size is indicated there in millimeters.
  • 📄 Check documentation to the car (section "Technical Specifications" or "Consumables").
  • 💻 Use online services selection by VIN (for example, Autodoc or Exist.ru).

⚠️ Attention: On Almera Classic wipers were installed from the assembly line hook type fastening. However, when replacing, many owners are faced with the fact that the new brushes do not fit the type of fastening. In this case you will need adapter (For example, Bosch A757H or HEYNER 850001).

If you buy wipers online, pay attention to mounting compatibility. Universal brushes (for example, Bosch Aerotwin) often come with a set of adapters, but for Almera Classic the optimal choice would be models with fixed mount "9x3" or "9x4".

💡

Before buying new wipers, take a photo of the attachment of the old blade - this will help the seller choose a compatible model without errors.

TOP 5 wiper manufacturers for Almera Classic: what to choose?

The market offers hundreds of windshield wiper blade options, but not all of them are equally effective. We analyzed owner reviews Almera Classic and tests by independent experts (including ADAC And Behind the Wheel) to rank the best manufacturers:

  1. Bosch Aerotwin (AR651S / AR401S) — frameless brushes with an asymmetrical profile ensuring a uniform fit. Suitable for Almera Classic N16 (650/400 mm). Average service life is 1.5–2 years.
  2. HEYNER Hybrid (4000 650/400) — hybrid brushes with a metal frame and rubber coating. Optimal for winter use (does not freeze at −20°C).
  3. Denso Wiper Blade (DF-0650 / DF-0400) - original brushes for Nissan, delivered to the conveyor. More expensive than analogues, but guaranteed to fit properly.
  4. Valeo Ultimate (600003 / 600002) — frameless brushes with graphite coating for quiet operation. Good for regions with frequent rain.
  5. Champion EasyVision (E650 / E400) - a budget option with acceptable quality. Suitable for temporary replacement.

🔹 Selection advice: If you drive mainly around the city, frameless brushes are optimal (Bosch or Valeo). For winter use, it is better to choose hybrid models (HEYNER) or original (Denso).

Check sizes for your year of manufacture|

Check fastening type (hook 9x3 or 9x4)|

Select material (rubber with graphite for winter, silicone for summer)|

Pay attention to the presence of adapters in the kit |

Compare reviews of a specific model on forums (for example, Drive2)-->

Step-by-step instructions for replacing wipers on Almera Classic

Replacing windshield wiper blades with Nissan Almera Classic takes no more than 10 minutes and does not require special tools. Follow the algorithm:

  1. Raise the wiper to a vertical position (perpendicular to the windshield). Be careful - do not use force to avoid damaging the mechanism.
  2. Press the fastening latch (usually this is a plastic latch on the back of the brush).
  3. Slide the brush downto remove it from the hook. If the fastener is stuck, use WD-40.
  4. Install a new brush, aligning the mount with the hook until it clicks. Make sure the latch snaps into place.
  5. Lower the wiper on the glass and check operation in different modes (intermittent, constant).

⚠️ Attention: If, after replacement, the wipers leave streaks or “jump” on the glass, the reason may be:

  • 🔹 Wrong size (for example, 600 mm instead of 650 mm).
  • 🔹 Wear of the windshield wiper mechanism (replacement of trapezoid is required).
  • 🔹 Dirty windshield (needs to be cleaned silicone wipe).
How to check the operation of the wipers after replacement?

Turn on the washer and check whether the liquid is distributed evenly across the glass. If dry streaks remain, the brushes do not fit tightly. Also pay attention to the noise: creaking or knocking indicates improper installation or defective brush.

Common mistakes when choosing and replacing wipers

Even experienced car owners make mistakes that lead to rapid wear of the brushes or damage to the mechanism. Here are the most common:

  • 🚫 Buying “universal” brushes excluding fastening. For example, wipers for VW Golf may not approach Almera Classic, even if the size is the same.
  • 🚫 Ignoring the season. Summer brushes become tanned and scratch the glass in winter, while winter brushes wear out faster in summer.
  • 🚫 Installing wipers by eye. A difference of 50 mm (for example, 600 mm instead of 650 mm) results in incomplete cleaning of the glass.
  • 🚫 Using used brushes. Rubber loses its elasticity after 1–2 years of use, even if it looks normal in appearance.

🔹 How to avoid mistakes? Please check with spare parts catalog Nissan (for example, via Nissan EPC) or use VIN matching services. If in doubt, take your old brush with you to the store for comparison.

💡

On Almera Classic with heated wiper area, you cannot install blades with a metal frame - this will lead to overheating and melting of the plastic parts.

When to change wipers: signs of wear

Manufacturers recommend replacing windshield wiper blades every 6–12 months, but in practice the period depends on the intensity of use and operating conditions. The following signs indicate that it is time to replace the wipers:

  • 💧 Stains on glass after the wipers work (even with washer).
  • 🔊 Creaking or knocking when the brushes move.
  • 👓 Uneven tire wear (visible by the “teeth” on the edge).
  • ❄️ Brushes freezing in winter (unless they are designed for low temperatures).
  • 🚿 Poor fit to the glass (the brush “lags behind” at the edges).

🔹 Wear test: Run your finger along the edge of the brush. If you feel any unevenness or cracks, it’s time to change it. Also note rubber color: darkening or whitening of the coating indicates aging of the material.

On Almera Classic with a mileage of more than 100 thousand km, it is additionally recommended to check:

  • 🔧 Condition trapezoid wipers (play or jamming).
  • 💦 Performance washer nozzles (clogging leads to premature wear of the brushes).

Alternative solutions: what to do if the wipers don't work

If, even after replacing the blades, the quality of glass cleaning leaves much to be desired, the problem may not lie in the wipers. Let's consider alternative solutions:

  • 🧴 Glass processing anti-rain compounds (for example, Rain-X). They reduce the adhesion of water to glass, making it easier for wipers to work.
  • 🔧 Adjusting brush pressure. On Almera Classic this is done by springs in the mechanism (partial disassembly is required).
  • 🚿 Replacing washer fluid for winter (with anti-icing additives).
  • 🔄 System modernization: installation of heated wipers (for example, HEYNER ThermoPlus).

⚠️ Attention: On vehicles with automatic wiper activation system (rain sensor) It is not recommended to use anti-rain coatings - they may interfere with the operation of the sensor.

If you decide to install heated wipers, consider:

  • Will be required modification of electrical wiring (connection to fuse or relay).
  • Not all heated brushes are compatible with hook mount - check before purchasing.

FAQ: Frequently asked questions about wipers on Almera Classic

Is it possible to install larger wipers than indicated in the manual?

No, this will lead to increased load on the windshield wiper motor and premature wear. In addition, blades that are too long can catch on windshield pillars or body edges.

Which wiper brand is the most durable for Almera Classic?

According to test results, brushes last the longest Bosch Aerotwin (up to 2 years) and Denso (original). However, their service life depends on care: regular cleaning of dirt and the use of high-quality washer fluid.

What to do if new wipers squeak?

The squeak is usually caused by:

  1. Incorrect installation (check fastening).
  2. If the glass is dirty (clean alcohol solution).
  3. Poor quality rubber (replace with graphite-coated brushes).
Is it possible to restore old wipers?

Partially - yes. To do this:

  1. Wash the brushes in warm water and soap.
  2. Finish the edge silicone grease.
  3. Level the rubber with sandpaper (grit 1000).

However, this is a temporary measure - after 1-2 months the brushes will still have to be changed.

Where to buy original wipers for Almera Classic?

Original brushes Nissan (articles 28510-BM400 And 28511-BM400) can be ordered:

  • From official dealers Nissan (guaranteed authenticity).
  • On the sites Exist.ru, Autodoc (check seller reviews).
  • In parts stores marked "OEM" (for example, JapanParts).

The cost of the original is from 1,500 to 2,500 rubles per set.