Windshield wiper blades for Nissan Almera Classic: sizes, selection and replacement

Owners Nissan Almera Classic (also known as Nissan Sunny B10 or N16 depending on the market) are often faced with the problem of selecting wipers. Incorrectly selected blades not only clean the glass worse, but can also damage the windshield wiper mechanism or leave scratches on the windshield. In this article we will look at exact brush sizes for all modifications Almera Classic, including differences by year of manufacture, and will also give practical advice on selection and replacement.

A special feature of this model is the non-standard lengths of the wipers for the driver and passenger sides, which depend on the configuration and year of production. For example, on restyled versions after 2008, brushes of a different length were often installed than on pre-restyle ones. We have collected current data from official catalogs Nissan and proven analogues so that you can choose the best option without errors.

Official wiper blade sizes for Nissan Almera Classic

The manufacturer recommends the following wiper sizes for Almera Classic (including sedan and hatchback versions):

Modification	Year of manufacture	Driver's side (cm)	Passenger side (cm)	Rear wiper (cm)
Nissan Almera Classic B10 (dorestyle)	1995–2000	55	45	30 (for hatchback)
Nissan Almera Classic N16 (restyle)	2000–2006	60	45	30 (for hatchback)
Nissan Almera Classic (Russia, Ukraine)	2006–2012	60	40	35 (for station wagon)
Samsung SM3 (Korean clone)	1998–2003	55	45	—

Important! On some versions Almera Classic after 2008, brushes with a length of 60 cm (driver) and 42 cm (passenger) - this is due to a change in the shape of the windshield. Before purchasing, check the dimensions on the old wipers or in the vehicle documentation.

If your machine is equipped frameless brushes, their length may differ by 1–2 cm due to the fastening features. For example, original frameless wipers from Nissan for Almera N16 They measure 58/43 cm, but fit standard mounts.

How to determine the size of brushes without measurements?

If you do not have the opportunity to measure old wipers, use one of the proven methods:

• 🔍 Vehicle VIN code. Indicate it in spare parts catalogs (for example, Nissan EPC or Autodoc) to get the exact data for your modification.
• 📄 Operation manual. The "Specifications" section usually lists the brush sizes.
• 📱 Online selection services. On sites like Drive2 or Auto.ru There are databases of wiper sizes for specific models.
• 🚗 Visual inspection. On many brushes, the size is indicated on the plastic body (for example, "600" = 60 cm).

If you buy blades from an offline store, take your old wipers with you for comparison. Even a small discrepancy of 2-3 cm can cause the brush to touch the edge of the glass or to fit poorly.

⚠️ Attention: On some Almera Classic with air conditioning, extended wipers were installed (62 cm instead of 60 cm) due to the changed shape of the hood. Check it out before you buy!

Original vs analogues: what to choose for Almera Classic?

Original brushes Nissan (articles: 28520-4M000 for the driver's side, 28521-4M000 for passenger) guarantee a perfect fit, but their price is often too high. Alternative options may be no worse in quality, but 2-3 times cheaper.

Let's compare popular brands:

• 🏆 Bosch Aerotwin. Frameless brushes with an aerodynamic profile. Suitable for Almera N16 (dimensions 60/45 cm). Average service life is 1.5 years.
• 💰 Valeo Silencio X-TRM. Quiet and durable, but may not fit older models B10 due to a different fastening.
• ⚡ Champion EasyVision. A budget option with good cleaning, but they wear out faster in cold weather.
• 🔧 SWF Visioflex. Universal brushes with adapters for different mounts. Suitable for Samsung SM3 (Korean equivalent Almera).

When choosing analogues, pay attention to fastening type. On Almera Classic used:

• 🔗 Hook. Standard for most models.
• 🔳 Side Pin. Found on restyled versions.
• 🔄 Bayonet (bayonet). Rare, but can be caught early B10.

Step-by-step instructions for replacing windshield wiper blades

Replacing wipers with Nissan Almera Classic takes no more than 10 minutes. All you need are new brushes and a flathead screwdriver (for some types of fasteners).

Step 1. Preparation. Raise the wipers to the vertical position (do not operate the windshield wipers in this position!). If the brushes are stuck, carefully pry them off with a screwdriver.

Step 2. Removing old brushes.

• For hook fastening: Press the latch on the side and slide the brush down.
• For side pin: Pull the brush towards you while holding the metal bracket.
• For bayonet: Turn the brush counterclockwise and remove.

Step 3: Installing new brushes. Align the new blade mount with the wiper arm and lock until it clicks. Make sure the brush is not loose.

Step 4. Check. Lower the wipers and turn on the washer. If the brushes leave streaks or do not fit tightly, check that they are installed correctly.

⚠️ Attention: On Almera Classic With a heated windshield, you cannot install blades with metal elements - this can damage the heating filaments!

What to do if new brushes squeak?

Creaking usually occurs due to improper installation or poor quality rubber. Try cleaning the glass with alcohol and applying silicone grease to the brushes. If the problem persists, replace it with a model with a graphite coating.

Common mistakes when choosing and replacing wipers

Even experienced car owners sometimes make mistakes that lead to rapid wear of the brushes or damage to the glass. Here are the most common of them:

• ❌ Size mismatch. A brush that is 65 cm long instead of 60 cm will cling to the edge of the glass and leave streaks.
• ❌ Ignoring fastening type. For example, trying to install a brush with a mount Side Pin on the lever under Hook.
• ❌ Buying “universal” brushes. They rarely fit perfectly and often fall off at speed.
• ❌ Saving on quality. Cheap hard rubber brushes scratch glass and last a maximum of six months.
• ❌ Replacement of only one brush. Different lengths or wear result in uneven cleaning.

Another typical problem is Wrong position of wipers after replacement. If you do not return them to their original position (parallel to the hood), they may hit the edge of the glass when turned on and break.

On Almera Classic with automatic washer system (Rain Sensor) It is not recommended to install brushes with a thick frame - they can block the rain sensor.

How to extend the life of your windshield wiper blades?

The average service life of brushes is 6–12 months, but with proper care they can be used longer. Here are some proven methods:

• 💧 Regular cleaning. Wash brushes with soap and water once a month to remove sand and tar.
• ❄️ Ice protection. Before frost, treat the rubber with silicone grease or a special spray.
• 🚿 Proper washing. Do not turn on the wipers on dry glass - use washer first.
• ☀️ UV protection. Park in the shade or use a sun visor - rubber cracks from the sun.

If the brushes start to streak, try restoring them with sandpaper (2000 grit). Gently walk along the rubber edge to remove any burrs. This is a temporary solution, but can extend the life of your wipers by 2-3 months.

Where to buy brushes for Nissan Almera Classic?

Buy wipers for Almera Classic possible in the following places:

Source	Pros	Cons	Average price (pair)
Official dealer Nissan	Original quality guarantee	Expensive, limited range	2500–4000 ₽
Online stores (Autodoc, Exist, Kolesa.ru)	Wide selection, reviews, delivery	Risk of running into a fake	800–2500 ₽
Auto parts markets	Low prices, opportunity to touch the product	No guarantee, often fakes	500–1500 ₽
Gas station (for example, Lukoil, Gazpromneft)	Fast, convenient	Limited selection, high price	1200–3000 ₽

When purchasing online, pay attention to articles and reviews. For example, for Almera N16 brushes fit Bosch 3397004775 (60/45 cm) or Valeo 600158 (60/40 cm).

If you buy used brushes (for example, Avito), check:

• 🔹 Condition of the rubber (are there any cracks).
• 🔹 Fastening performance.
• 🔹 No frame deformation.

FAQ: Frequently asked questions about wiper blades for Almera Classic

Is it possible to install brushes from other Nissans (for example, from Note or Tiida) on Almera Classic?

Theoretically it is possible, but only if they match dimensions and mounting. For example, brushes from Nissan Tiida (60/45 cm) suitable for Almera N16, but may not be suitable for B10 due to another bend. It is better to check by article numbers or visually compare with old wipers.

Why do new brushes not clean glass well?

There are several reasons:

• 🔸 Incorrect installation (the mount is skewed).
• 🔸 Low quality rubber (especially with cheap analogues).
• 🔸 Dirty glass (a film of wax or resin).
• 🔸 Size mismatch (brush too long/short).

Try wiping the glass with alcohol and checking the tightness of the brushes.

How often do you need to change brushes on Almera Classic?

Recommended interval - once a year or every 15–20 thousand km. However, under conditions:

• 🌨️ Frequent snowfalls (rubber hardens faster).
• ☀️ Hot climate (UV rays destroy rubber).
• 🚗 Driving on dirt roads (sand wears away the edge).

— brushes can wear out within 6 months. Signs for replacement: streaks, squeaking, uneven cleaning.

Is it possible to restore old brushes?

Yes, but this is a temporary measure. Methods:

1. Process the edge sandpaper (2000 grit).
2. Apply silicone grease to restore elasticity.
3. Rinse in warm soapy solution (removes fat deposits).

If the rubber is cracked or peeling, restoration is useless - only replacement.

What brushes are best for winter?

For Almera Classic in winter it is recommended:

• 🏔️ Bosch Ice - with anti-icing protection.
• ❄️ Valeo Winter - with graphite coating.
• 🔥 SWF Thermoflex — remain flexible at -30°C.

Avoid frame brushes - they tend to collect snow and make the seal worse.