Nissan Almera Classic is a legendary sedan that has gained popularity due to its reliability, ease of maintenance and optimal dimensions for urban use. This car, based on the platform Nissan B10 (analogue Renault Samsung SM3), has become a real bestseller on the secondary market, especially in the CIS countries. But before buying, it is important to understand its dimensions: body length, wheelbase, ground clearance and other parameters directly affect comfort, maneuverability and practicality.

In this article we will analyze in detail all the dimensional characteristics Almera Classic, compare them with competitors (for example, Hyundai Solaris or Kia Rio), and also give practical advice on choosing a modification. We will pay special attention A unique feature of this model is the extended wheelbase (2600 mm), which provides a spacious interior with a compact external length.

Official dimensions of Nissan Almera Classic (B10)

According to the manufacturer's technical documentation, Nissan Almera Classic (years of manufacture 2006–2018) has the following dimensions:

  • 📏 Body length: 4490 mm - optimal indicator for the class B+, allowing you to easily park in the city, but not lose space in the cabin.
  • 🚪 Width: 1690 mm (excluding mirrors). In mirrors the width reaches 1930 mm, which is important to consider when driving through bottlenecks.
  • ⛽ Height: 1500 mm - a standard indicator for sedans, providing good stability on the road.
  • 🔄 Wheelbase: 2600 mm - one of the key advantages of the model, guaranteeing legroom for rear passengers.
  • 🚗 Ground clearance (ground clearance): 160 mm — sufficient for urban conditions, but requires caution on dirt roads.

These options make Almera Classic a universal choice: the car is compact enough to maneuver in traffic jams, but at the same time is not inferior in interior space to larger competitors. For example, length Hyundai Solaris first generation is 4370 mm - on 120 mm less, which significantly affects the comfort of rear passengers.

📊 Which parameter is more important to you when choosing a car?
  • Body length
  • Wheelbase
  • Clearance
  • Trunk volume
  • Exterior design

Comparison with competitors: who is more spacious?

To objectively assess the dimensions Nissan Almera Classic, let's compare them with their main rivals in the budget sedan class:

Model Length, mm Wheelbase, mm Ground clearance, mm Trunk volume, l
Nissan Almera Classic (B10) 4490 2600 160 490
Hyundai Solaris (1st generation) 4370 2570 160 450
Kia Rio (3rd generation) 4370 2570 160 500
Volkswagen Polo Sedan 4384 2552 165 460
Skoda Rapid 4483 2602 163 550

As can be seen from the table, Almera Classic differs favorably in body length and wheelbase, which ensures:

  • 🪑 More legroom for rear passengers (on 30–50 mm more than competitors).
  • 🧳 Volume trunk (490 l), which can be increased to 1200 l with the rear seats folded down.
  • 🚗 More stable behavior on the track thanks to the long wheelbase.

However, there are also disadvantages: due to the larger length, the turning radius Almera Classic amounts to 5.3 m (against 5.1 m at Solaris), which can be critical when parking in tight yards.

💡

When choosing between Almera Classic And Hyundai Solaris Pay attention to the rear row: if you often have to carry passengers taller than 180 cm, the first model will be more comfortable thanks to the increased wheelbase.

Body length and maneuverability: pros and cons

Length 4490 mm This is both an advantage and a potential disadvantage. Let's look at both sides:

Pros:

  • 🛣️ Stability at high speeds. The long wheelbase reduces the risk of "yaw" on the highway.
  • 👨‍👩‍👧‍👦 Space for passengers. The back row is suitable even for three adults (provided the trip is not too long).
  • 💼 Large trunk. fits in 4–5 medium-sized suitcases or baby stroller + shopping.

Cons:

  • 🅿️ Difficulties with parking. In dense urban areas you will have to use reverse gear more often.
  • 🔄 Larger turning radius. On narrow streets, three turns may be required.
  • ⛽ Slightly higher fuel consumption. Due to greater weight and dimensions Almera Classic consumes on 0.3–0.5 l/100 km more than Kia Rio.

If you often drive around the city with parking in limited spaces, it is worth practicing assessing the dimensions of the car in advance. For example, when driving into a garage in reverse, remember that the rear overhang is about 1000 mm from the rear axle.

How to properly park Almera Classic in a cramped yard?

Use the 30-45 degree rule: when reversing, turn the steering wheel half a turn until the rear wheel is aligned with the corner of the adjacent car. This will help avoid scratches on the bumper.

Ground clearance (ground clearance): is it enough for Russian roads?

Official clearance Nissan Almera Classic — 160 mm. This indicator is average for the class, but requires comments:

  • 🏙️ Urban conditions: the clearance is enough to overcome speed bumps and small holes, but curbs are more than 15 cm better to go around.
  • 🌳 Dirt roads and country roads: at higher speeds 40 km/h the risk of damage to the engine protection increases. It is recommended to install additional crankcase protection.
  • ❄️ Winter operation: snowfall can reduce ground clearance to 130–140 mm, which is critical for high snowdrifts.

For comparison: Renault Logan first generation ground clearance 155 mm, and Lada Vesta — 178 mm. If you often drive on bad roads, consider installing spacers under the springs (increasing ground clearance by 20–30 mm), but this may impair handling.

💡

Ground clearance of 160 mm is a compromise option. It is enough for the city, but for off-road use it is better to choose a crossover or install engine protection.

The influence of dimensions on technical characteristics

The dimensions of a car are directly related to its dynamics, fuel consumption and load capacity. Let's look at the key aspects:

1. Weight and fuel consumption

Curb weight Almera Classic amounts to 1150–1250 kg (depending on the configuration). It's on 50–100 kg more than Hyundai Solaris, which affects consumption:

  • 🛢️ In the city: 8.5–10 l/100 km (against 7.8–9 l from competitors).
  • 🛣️ On the track: 5.5–6.5 l/100 km.

2. Load capacity

Maximum permissible weight - 1680 kg, which allows you to transport up to 400–450 kg cargo (including passengers). Exceeding this limit leads to:

  • ⚠️ Overheating brakes.
  • ⚠️ Deterioration of controllability (especially when turning).
  • ⚠️ Increased wear of the suspension.

☑️ Preparing Almera Classic for a long trip

Done: 0 / 4

How do dimensions affect the cost of ownership?

The size of the car indirectly affects maintenance costs. Here are the key points:

  1. Cost of insurance (MTPL/CASCO). Almera Classic belongs to the class B+, therefore the engine power factor (for example, for 1.6 l) is higher than that of low-power babies of the class A.
  2. Parking. In paid parking lots, tariffs often depend on dimensions: for 4.5 meter the sedan can be rented 10–20% more than for Kia Picanto.
  3. Body repair. Parts for a long hood or rear fender will cost more than for compact hatchbacks.
  4. Washing. At car washes they charge for a sedan 50–100 rubles more than for a hatchback.

On the other hand, a spacious interior and a large trunk allow you to save on taxis or renting a truck for transporting large items.

💡

When applying for CASCO insurance, check whether the insurance company takes into account the length of the car when calculating the rate. Some companies increase the cost for machines longer than 4.3 m.

FAQ: Frequently asked questions about the dimensions of the Nissan Almera Classic

❓ Is Almera Classic suitable for a 2.3 m wide garage?

Yes, but with reservations. Width of the car according to the mirrors - 1930 mm, therefore, with the doors open (door width ~800 mm), the total space will be ~2730 mm. To comfortably open the doors, the width of the garage must be at least 2.5 m. If the garage is narrower, you will have to leave one by one or leave the windows open.

❓ Is it possible to install wider wheels on Almera Classic without affecting the arches?

Standard wheel width - 185/65 R15 or 195/55 R16. Maximum permissible width without body modifications:

  • 🔧 205/50 R16 - you will need to roll out the arches (minus 5–10 mm to the fender liners).
  • 🔧 195/60 R15 — will stand up without any problems, but may hit when fully loaded.

Before replacing, check the clearances on the lift!

❓ How long are the covers needed to protect the seats?

Covers that are long are suitable for the front seats 50–55 cm (along the back), for the rear sofa - 120–130 cm. Please note that the back seat Almera Classic inseparable, so the cover must be solid.

❓ Will a bicycle and a stroller fit into the trunk of the Almera Classic at the same time?

Yes, but on condition:

  • 🚲 The bicycle is folded (for example, a folding model) or disassembled (the front wheel has been removed).
  • 👶 The stroller is compact (not a 3-in-1 transformer).

If the stroller is oversized (for example, Cybex Priam), the bike will have to be mounted on the trunk from the outside.

❓ Why does Almera Classic have such a large overhang at the front?

Long front overhang (900 mm from the axle to the bumper) is due to:

  • 🔧 Engine layout (transverse arrangement).
  • 🛡️ Protection of pedestrians (deformation zone).
  • 🚗 Increased space for radiator and air conditioner.

The downside is the risk of catching the bumper when driving off high curbs. We recommend installing protection on the bumper.