Nissan Murano Z51 is a crossover that combines dynamic design and comfort, but even such a car requires the right approach to choosing wheels. Incorrect size, offset or PCD can lead to premature suspension wear, incorrect operation ESP and even emergency situations. In this article we will look at all the nuances: from factory parameters to tuning solutions, so that your Murano not only looked stylish, but also remained safe.

Many owners are faced with a dilemma: buy original wheels from Nissan or choose analogues from third-party brands? We analyzed technical manuals, owner reviews and service center recommendations to give clear answers. We will pay special attention sizes, materials And compatibility with tires - these parameters are critical to maintaining the warranty and reliability of the car.

Factory parameters of wheels for Nissan Murano Z51

The manufacturer clearly regulates the sizes of disks for Murano Z51 (2015–2022). Deviation from these parameters can lead to problems with steering, increased fuel consumption and even denial of warranty service. Key Features:

  • 📏 Diameter (D): 18", 20" (depending on configuration).
  • 🔄 PCD (bolt pattern): 5x114.3 mm - standard for most models Nissan And Infiniti.
  • 📐 Departure (ET): +35 to +45 mm. Deviation of more than ±5 mm is unacceptable.
  • ⚙️ Center Hole (DIA): 66.1 mm. When using spacers, precise adjustment is required.
  • 🔧 Rim Width (J): 7.5J–8.5J for 18" and 8.0J–9.0J for 20".

Important: discs with a diameter 17" installed only on basic versions with tires 235/65 R17, but such configurations were not officially supplied to Russia. If you see offers for 17" wheels for Murano Z51, check their compatibility with VIN code your car.

⚠️ Attention: Discs with PCD 5×112 (like Volkswagen or Audi) physically can be installed on the hub Murano, but this will lead to uneven tightening of the bolts and the risk of them loosening while driving.
Parameter 18" 20"
Rim Width (J) 7.5J–8.5J 8.0J–9.0J
Departure (ET) +35…+45 mm +40…+45 mm
Recommended tires 235/60 R18, 235/55 R18 235/50 R20, 255/45 R20
Permissible load (kg) up to 750 up to 800

Cast, forged or stamped: what to choose?

The disc material directly affects handling, comfort and safety. Let's look at the pros and cons of each option for Nissan Murano Z51:

  • 🔨 Stamped discs: Cheap, repairable (can be rolled if there are dents), but heavy (increase fuel consumption) and prone to corrosion. Suitable for winter use.
  • ⚡ Alloy wheels: Lightweight, improves dynamics and appearance, but fragile when impacted (cracks in potholes). The optimal choice for city driving.
  • 💎 Forged wheels: The most durable and lightest, but expensive. Ideal for aggressive driving or tuning. Recovering from damage is difficult.

Tip: if you often drive on bad roads, combine alloy wheels in summer And stamped in winter. This will save the repair budget and extend the life of the suspension. For Murano Z51 with engine VQ35DE (3.5 l) the extra weight of the discs is especially critical - it impairs acceleration and increases the load on the transmission.

📊 What wheels do you have on your Nissan Murano?
  • Cast
  • Forged
  • Stamped
  • Others

How to choose wheels based on a car's VIN code?

Even knowing the standard parameters, it is easy to make mistakes with compatibility. The most reliable way is to check by VIN code. It contains information about the year of manufacture, configuration and even factory options that affect the permissible disk sizes.

Where can I look up the VIN? Murano Z51:

  1. On the plate under the hood (driver's side).
  2. At the bottom of the windshield (visible from outside).
  3. In documents: STS or PTS.

Next, check the VIN through official services:

⚠️ Attention: If your Murano equipped with a system 4WD (all-wheel drive), the disks must withstand increased loads. In this case, the minimum rim width for 20" wheels is 8.5J, and the overhang should not exceed ET45.
💡

Before purchasing wheels, use the VIN to check whether there have been any changes to the suspension (for example, installing spacers or springs). This may require an offset adjustment (ET).

Tuning wheels: what is possible and what is not?

Many owners Murano Z51 want to stand out by installing wheels of non-standard sizes. However, it is important to maintain a balance between aesthetics and safety. Acceptable modifications:

  • 🆙 Increase in diameter to 22": Possible, but requires:
    • Low profile tires (eg 265/35 R22).
    • Check for the absence of friction on the arches (especially when fully loaded).
    • Adjustments to speedometer speed indicators (may overestimate by 5–10%).
  • 🔄 Change in departure (ET): Allowed within ±5mm of factory value. More radical changes will require boring the arches or installing spacers (which is unsafe).
  • 🎨 Color and design: Any, but avoid discs that are too heavy (maximum load on the hub is 850 kg).

Critical information: Wheels with a diameter of 22" and larger are not certified by the manufacturer for Murano Z51. Their installation automatically removes the car from warranty and can lead to denial of insurance coverage in the event of an accident.

What happens if you install discs with the wrong PCD?

If the bolt pattern does not match (eg 5x112 instead of 5x114.3), the bolts will not be tightened evenly. This will lead to:

1. Steering wheel vibrations at speeds above 80 km/h.

2. Self-loosening of the bolts while driving (risk of losing the wheel).

3. Accelerated wear of wheel bearings (replacement will cost 15–20 thousand rubles).

Review of popular wheel brands for Murano Z51

There are hundreds of brands on the market, but not all are suitable for Nissan Murano. We have selected proven options taking into account the price/quality ratio:

Brand Type Popular models Average price (per 1 disc)
Enkei Cast PF05, Raijin 12 000–18 000 ₽
BBS Forged CH-R, CI-R 25 000–40 000 ₽
Kosei Cast K1-Racing, K8R 9 000–14 000 ₽
Replica (original) Cast/stamped Nissan OEM 20 000–35 000 ₽

When choosing, pay attention to:

  • 🔧 Certification: Discs must be marked ECE R124 or JWL (Japanese standard).
  • ⚖️ Weight: Optimally - up to 12 kg for 18" and up to 14 kg for 20".
  • 🛡️ Guarantee: Minimum 2 years for alloy wheels and 5 years for forged ones.
💡

Brand wheels Enkei And BBS often installed on Murano from the factory in top trim levels. Their geometry is ideal for hubs Nissan without modifications.

Checklist before purchasing discs

To avoid errors, follow this algorithm:

Check the year of manufacture and equipment of the Murano Z51 by VIN|Check the PCD (5×114.3) and DIA (66.1 mm)|Check the offset (ET) and rim width (J)|Make sure the certificate of conformity is available|Compare the weight of the rim with the factory one (no more than +10%)-->

Additionally:

  • 🔍 Ask the seller to show 3D disk model on the hub of your model (many stores provide this service).
  • 📦 Check the package: the box should contain bolts or nuts (if the discs are not original, adapter studs may be required).

Common mistakes when choosing disks and how to avoid them

Even experienced car owners sometimes make mistakes. Let's look at typical mistakes:

  1. Ignore departure (ET): Wheels with ET30 instead of ET40 visually look wider, but shift the center of gravity of the wheel. This leads to:
    • Accelerated wear of the hub bearings.
    • Deterioration of controllability at high speeds.
  • Saving on bolts: Using standard bolts instead of elongated ones (for wheels with a large offset) can cause them to break.
  • Ignoring rim width: Wheels that are too wide (for example, 9.5J instead of 8.5J) require rolling out the arches, which violates the tightness of the body.
    • ⚠️ Attention: If, after installing new disks, the indicator on the dashboard comes on ESP or ABS, check immediately:
    • Correct tightening of the bolts (torque - 110–120 Nm).
    • Compatibility of ABS sensors with new disks (sometimes the unit requires flashing).

    FAQ: Answers to frequently asked questions

    Is it possible to install wheels from an Infiniti QX60 on a Murano Z51?

    Yes, but with reservations. Infiniti QX60 (JX35) and Murano Z51 have the same PCD (5×114.3) and DIA (66.1 mm), but:

    • Departure (ET) QX60 may differ (eg ET40 instead of ET45).
    • Discs from Infiniti often heavier, which worsens the dynamics.
    • Exterior design may not be in harmony with the body Murano.

    Please check the catalog before purchasing Infiniti Parts by VIN.

    What is the maximum diameter of discs that can be installed without modifications?

    Without modifications to the suspension and arches, the maximum safe diameter is - 20". For 21" or more you will need:

    • Installing spacers (but this worsens handling).
    • Rolling or cutting arches (violates the integrity of the body).
    • Replacing shock absorbers with shortened ones (for example, from Nissan Rogue).

    Remember: any modifications must be approved by the traffic police for legal use.

    What should I do if vibration appears after replacing the disks?

    Causes of vibration and solutions:

    1. Wheel imbalance: Carry out balancing on a stand (cost: 500–800 rubles per wheel).
    2. Warped disc: Alloy wheels are checked for 3D stand (even an outwardly smooth disk can be crooked).
    3. Incorrect bolt tightening: Tighten the bolts crosswise with a torque of 110 Nm.
    4. Damaged wheel bearing: Diagnosed by a hum when turning. Replacement - from 5,000 ₽.
    Which wheels are better for winter: cast or stamped?

    For winter use stamped wheels preferable for reasons:

    • 🔨 Impact resistant (they don’t crack in holes like cast ones).
    • 💰 Cheap repairs (rolling costs 1,000–1,500 ₽).
    • ❄️ Less risk of corrosion when exposed to reagents (alloy wheels are often coated only with varnish).

    If you still want alloy wheels in winter, choose models with matte surface (less noticeable scratches) and treat them anti-corrosion composition (For example, Liqui Moly Unterbodenschutz).