Mud flaps on Nissan Note E11 is not just an accessory, but an important element of protecting the body from corrosion, chips and dirt. Owners of this compact hatchback are often faced with the problem of rapid wear of factory plastic parts, especially in Russian roads with reagents and gravel. But how to choose the right mud flaps so that they fit perfectly on the arches, do not cling to the wheels and last longer than the original ones?

In this article we will look at all the nuances: from the differences between front and rear mudguards to the intricacies of installation on Note E11 with engines HR15DE And HR16DE. You will learn which materials are better able to withstand temperatures down to -30°C, how to avoid mistakes when fastening, and why cheap analogues can be more expensive in the long run. And also - exclusive life hacks care instructions that will extend the life of your mudguards by 2 times.

Why are mud flaps needed on the Nissan Note E11: real benefit or marketing?

Many car owners treat mud flaps as a “cosmetic” element, but in practice they serve 4 key functions:

  • 🛡️ Paint protection from sandblasting and gravel. At speeds of 80+ km/h, even small stones hit the rapids with a force comparable to a hammer blow. Without mudguards, chips on arches Note E11 appear after 10–15 thousand km.
  • 💧 Reduced corrosion. Moisture and reagents falling on the metal from under the wheels accelerate rusting by 3–5 times. Welds on arches are especially vulnerable.
  • 🚗 Improved aerodynamics. Properly selected mud flaps reduce air turbulence under the bottom, which reduces fuel consumption by 0.3–0.5 l/100 km.
  • 🔧 Ease of repair. When replacing shock absorbers or wheel bearings, mud flaps protect the mechanic's hands from sharp metal edges.

On Nissan Note E11 Factory mud flaps are often made of brittle plastic that cracks at -20°C. For example, original parts with art. 62610-4M000 (front left) and 62611-4M000 (front right) cost ~2,500 rubles. per pair, but last no more than 2-3 seasons. At the same time, high-quality analogues from Febi or Hepu are cheaper and last longer.

⚠️ Attention: On restyled Note E11 (2010–2013) mudguard mounts differ from pre-restored models (2006–2009). Before purchasing, check the VIN code or consult the catalog by year of manufacture!

Original vs analogues: which is better for Nissan Note E11?

The choice between original mudguards and analogues depends on your budget and goals. Let's look at the pros and cons of each option:

Criterion Original mud flaps Analogs (Febi, Hepu, Sidem) Budget analogues (no-name)
Price per set (4 pcs.) 8,000–12,000 rub. RUB 3,500–6,000 1,200–2,500 rub.
Material Polypropylene (brittle in cold weather) Modified polyethylene or TPE Cheap plastic (cracks at -10°C)
Service life 2–3 seasons 4–6 seasons 1 season (maximum)
Fit accuracy Perfect (100% match with the body) 95–98% (may require adjustment) 70–80% (often gets caught on wheels)
Warranty 1 year (at official dealers) 1–2 years (for trusted brands) Missing

If you drive mainly around the city and do not park your car outside in winter, the original mud flaps will last quite a long time. But for operation in harsh conditions (gravel, reagents, frost), it is better to choose analogues from Febi (art. 26261) or Hepu (art. P935-01). They are made of elastic thermoplastic that does not harden in the cold and can withstand impacts from gravel.

📊 What kind of mud flaps are on your Nissan Note E11?
  • Original
  • Analogues (Febi, Hepu)
  • Budget (no-name)
  • Homemade
  • No mudguards

Professional advice: When purchasing analogues, pay attention to the availability reinforced fastenings. On Note E11 standard clips often break during dismantling, so it is better to immediately buy a set of spare ones (art. 01515-4M00A for the front arches).

How to choose mud flaps by size and material?

On Nissan Note E11 mud flaps differ not only along the axis (front/rear), but also along the side (left/right). An error in selection will lead to the part clinging to the wheel or not falling into place. Here are the key parameters for selection:

  • 📏 Dimensions:
    • Front: length ~50 cm, width ~20 cm (taking into account the bend under the arch).
    • Rear: length ~60 cm, width ~25 cm (take into account the shape of the bumper).
  • 🔧 Mounts: On the front arches there are 3 clips + 2 screws, on the rear arches there are 4 clips + 1 M6 bolt.
  • 🌡️ Material: Optimal choice - TPE (thermoplastic elastomer) or polyurethane. They do not crack at -30°C and restore their shape after impacts.

To check compatibility, use the directories:

How to check a mudguard for compatibility without purchasing?

Before ordering, ask the seller for a template (usually in PDF format) and attach it to the arch of the car. If the contours match 90%, the part will fit. Pay special attention to the mounting holes: on the Note E11 they are asymmetrical!

Critical mistake: 60% of Note E11 owners buy mud flaps from the Nissan Micra K13, considering them interchangeable. In fact, the fastenings and shape of the arches are different - parts from the Micra will not fit into place without modification!

Step-by-step instructions for installing mud flaps on Nissan Note E11

Installing mudguards does not require special skills, but there are nuances that save time. Here are detailed instructions taking into account the features Note E11:

Phillips screwdriver (PH2)

10mm socket (for rear bolts)

Plastic clips (set 62625-4M000)

Silicone grease (for sealing)

Hair dryer (to soften plastic at low temperatures) -->

Step 1. Dismantling old mudguards

  1. Jack up the car and remove the wheel (for convenience).
  2. Unscrew the fastening screws (2 pieces on the front arches, 1 M6 bolt on the rear arches).
  3. Carefully pry up the clips with a flathead screwdriver. Don't pull on the mudguard! - this is how the mounting ears break.

Step 2. Preparing new mudguards

  • If the temperature is below +10°C, heat the parts with a hair dryer (60–70°C mode) - this will make the plastic elastic.
  • Apply silicone grease to the edges adjacent to the body - this will prevent squeaks.

Step 3: Installation

  1. Start with the top clips, then secure with the screws/bolts.
  2. On the rear arches, first attach the mudguard to the bumper, then to the side member.
  3. Check the clearance to the wheel - it should be 10–15 mm with the steering wheel in a straight position.
⚠️ Attention: On Note E11 with engine HR16DE The front left mudguard may cling to the intercooler pipe. In this case, carefully trim the edge with a knife (no more than 5 mm!).
💡

If the clips do not hold, use 3M double sided tape for additional fixation. Apply it only to a dry and grease-free surface!

Subtleties of care: how to extend the life of mudguards?

Even the best quality mudguards will last longer if you follow simple care rules. This is especially true for Nissan Note E11, where the arches quickly become dirty due to the compact wheel arches.

  • 🧼 Washing: Use contactless shampoos (For example, Karcher RM 539) and a soft brush. Abrasive sponges scratch plastic, making it brittle.
  • 🧴 Protection: Apply once a season silicone spray (For example, WD-40 Specialist) - this prevents cracking.
  • ❄️ Winter care: After using reagents, rinse the splash guards with warm water. Salt corrodes plastic in 1-2 seasons.
  • 🔧 Checking the fasteners: Every 10 thousand km, inspect the clips - they tend to “pop out” when driving off-road.

What not to do:

  • 🚫 Wash mudguards Karcher under pressure >120 bar - this tears off the clips.
  • 🚫Apply wax polishes - they make the plastic brittle.
  • 🚫 Paint mudguards spray paint without primer - it peels off after a month.
💡

Regular cleaning of mudguards anti-gravel mastic (For example, Body 930) increases their service life by 40%. Apply it in a thin layer with a brush 2 times a year.

Common problems and how to avoid them

Even after proper installation, owners Nissan Note E11 face typical problems. Here's how to solve them:

Problem Reason Solution
The mudguard rubs against the wheel Wrong size or deformation Heat with a hairdryer and bend it into an arch shape
Creak when driving Lack of lubrication between the mudguard and the body Apply silicone spray to joints
The clips keep falling out Worn or unsuitable fasteners Replace with clips with a metal core (art. 62625-4M010)
Cracks after winter Using cheap plastic Install mud flaps made of TPE or polyurethane

If the mudguard begins to “pop” on bumps, check play in fastenings. Often the problem is solved by tightening the screws or replacing the rubber bushings (art. 01525-4M000).

For owners Note E11 with increased ground clearance (for example, after installing spacers), standard mud flaps may be too short. In this case, universal parts from Sidem (art. SM-1018), which can be cut to the desired size.

Where to buy mud flaps for Nissan Note E11: trusted sellers

Prices and selection vary greatly depending on the region. Here's where it's best to buy:

  • 🏆 Original:
    • Nissan Center - guarantee, but expensive (from 2,000 rubles per piece).
    • JP-CarParts - 30% cheaper, but delivery takes 2-3 weeks.
  • 💰 Premium analogues:
    • EXIST — wide choice Febi And Hepu.
    • Autodoc — frequent discounts up to 20%.
  • 🛒 Budget options:
    • AliExpress - cheap (from 300 rubles), but the quality is lottery.
    • Local disassembly - used originals for 500–800 rubles.

When purchasing on AliExpress Pay attention to the reviews with installation photos. Sellers often indicate compatibility with Note E11, but they send details from Micra or Juke. Before paying, please check the art. 62610-4M000/62611-4M000 for front and 62630-4M000/62631-4M000 for rear mudguards.

FAQ: answers to frequently asked questions

Is it possible to drive a Nissan Note E11 without mudguards?

Technically yes, but this will lead to:

  • Accelerated corrosion of sills and arches (after 2 years, through holes may appear).
  • Damage to paintwork from gravel (the cost of repainting an arch is from 8,000 rubles).
  • Deterioration of aerodynamics and increase in fuel consumption by 0.2–0.4 l/100 km.

If the mudguards have been temporarily removed (for example, for repairs), treat the arches anticorrosive (For example, Dinitrol 4941).

What mudguard material is the most durable for Russian roads?

According to the test results (conducted by Za Rulem magazine in 2022), the best materials are:

  1. TPE (thermoplastic elastomer) — withstands from -40°C to +100°C, does not crack, and restores its shape. Example: Febi 26261.
  2. Polyurethane - 2 times stronger than plastic, but more expensive. Example: Hepu P935-01.
  3. Modified polypropylene - a budget option, but lasts no more than 2 seasons.

Worst choice - ABS plastic (becomes brittle at -15°C).

What is the difference between mudguards for Note E11 pre-restyle and restyle?

Main differences:

Parameter Dorestyle (2006–2009) Restyle (2010–2013)
Front mudguard shape Straighter, without bending under the bumper Curved, with additional mount to the bumper
Rear mudguard mounts 2 clips + 1 bolt 3 clips + 1 bolt + self-tapping screw
Article numbers of original parts 62610-4M000 (front left) 62610-4M010 (front left)

Mud flaps are not interchangeable! Installing parts from pre-restayl onto restyle will cause them to dangle or break the fasteners.

Can mudguards be painted to match the body color?

Yes, but in compliance with technology:

  1. Degrease the surface antisilicon.
  2. Apply plastic primer (eg Motip Plastik Primer).
  3. Paint in 2-3 layers acrylic paint with an interval of 15 minutes.
  4. Cover matte varnish for protection against UV rays.

Important: Do not use spray paint without a primer - it will fall off after 2-3 washes. For Note E11 with metallic (KH3, B54) select the paint according to the code in the salon.

What to do if the mudguard breaks on the way?

Temporary measures:

  • Secure the part that has fallen off plastic ties (if the mounting lugs are preserved).
  • Use double sided tape (For example, 3M VHB) for fixing to the body.
  • In case of severe damage, remove the mudguard completely so that it does not scratch the wheel.

For permanent repairs:

  • Weld the cracks soldering iron with plastic attachment.
  • Strengthen the attachment point aluminum tape.