Minivan Nissan Wingroad Y11 (1999–2005) remains a popular choice among owners of compact family cars due to its reliability, spacious interior and unpretentiousness. However, the front and rear bumpers of this generation often become “consumables”: they suffer from minor accidents, corrosion, or simply lose their presentable appearance over the years. In this article we will analyze all the nuances of choosing a bumper for Wingroad Y11 - from original parts to budget analogues, and we will also give step-by-step instructions for replacement and ideas for tuning.
Feature Wingroad 11th generation the fact that its bumpers are mounted on bolts and pistons, which simplifies dismantling, but requires care when installing new elements. We analyzed market offers, owner reviews and technical data to compile the most practical guide - without water and general phrases. If you're looking for specific part numbers, prices or painting tips, you'll find the answers here.
Original bumpers vs analogues: what to choose?
Original bumpers from Nissan for Wingroad Y11 guarantee a perfect fit and durability, but their cost often exceeds 20-30 thousand rubles for a front or rear part. Main articles:
- 🔹 Front bumper:
62610-4M000(without fog lights) or62610-4M001(with holes for PTF). - 🔹 Rear bumper:
62710-4M000(standard) or62710-4M002(with cutout for tow bar). - 🔹 Mounting kit:
62630-4M000(pistons, bolts, seals).
An alternative is bumpers from proven analogue manufacturers: Febi, Denso, Hella or Taiwanese brands like TYC. Their advantages are the price is 30–50% lower than the original, and the disadvantages are possible inconsistencies in fastenings (for example, you will have to modify the holes for parking sensors). Important: when purchasing an analogue check for a certificate of conformity and compare the geometry of the part with the original using the photo.
- Original Nissan
- High-quality analogue (Febi, Denso)
- Budget option (Taiwan/China)
- There was already a non-original one
How to spot a fake: 5 key signs
Spare parts market for Wingroad Y11 is flooded with counterfeits, especially in the bumper segment. Counterfeits are often made from low-quality plastic, which cracks in sub-zero temperatures or fades in the sun. Please note:
- 🔍 Marking: the original has an article number and logo stamped on it Nissan and country of origin (Japan or Thailand). Counterfeits often have blurry characters.
- 🔍 Plastic thickness: original - 3-4 mm, fake - 1.5-2 mm (you can check with a caliper).
- 🔍 Color: The original bumper has a uniform tint without yellowing. Counterfeits are often gray or streaky.
- 🔍 Fastenings: in fakes, the bolt holes can be shifted by 2–5 mm.
- 🔍 Packaging: The original comes in a branded box with a hologram, fakes are in polyethylene without identification marks.
⚠️ Attention: if the seller refuses to provide a photo of the bumper mounts or a certificate, this is a reason to doubt the authenticity of the part. Front bumpers with PTF are especially often counterfeited (article number 62610-4M001).
Critical point: fake bumpers for Wingroad Y11 may not withstand even a slight impact at a speed of 15–20 km/h, since their plastic is not reinforced with fiberglass, like the original. Before purchasing, be sure to check the part for bending - the original should not bend under light pressure.
Step-by-step instructions for replacing the front bumper
Replacing the front bumper with Wingroad Y11 takes 1.5–2 hours if you have the tools. You will need:
- 🔧 10 and 12 mm socket wrenches.
- 🔧 Screwdriver with a Phillips bit.
- 🔧 Plastic spatulas for removing clips.
- 🔧 New pistons (item no.
01515-4M00A).
Algorithm of actions:
- Removal:
- 🔹 Unscrew the bolts securing the bumper to the subframe (4 pcs. from below).
- 🔹 Disconnect the clips on the sides (under the headlights) and on top (under the hood).
- 🔹 Gently pull the bumper towards you, disconnecting the PTF connectors (if any).
- Installation:
- 🔹 Try on the new bumper, check the holes match.
- 🔹 Secure it to the pistons at the top, then tighten the bolts at the bottom.
- 🔹 Connect the PTF and check the operation of the light.
☑️ Preparation for replacing the Wingroad Y11 bumper
⚠️ Attention: When removing the bumper, do not pull it down sharply - this may damage the radiator grille. If the clips are broken, do not use self-tapping screws instead: this will disrupt the geometry of the fastening.
After installation, check the gaps between the bumper and fenders - they should be the same (2-3 mm). If the bumper is loose, tighten the bolts or add spacers.
Rear bumper: nuances of dismantling and installation
Rear bumper Wingroad Y11 It is easier to remove than the front one, but there are some pitfalls here. The main difficulty is access to the lower bolts, which often rust. Treat the thread before work WD-40 and prepare:
- 🔧 Extended head by 10 mm (for bolts under the bumper).
- 🔧 Pliers for removing trunk clips.
- 🔧 Sealant for processing joints (for example, ABRO).
Procedure:
- Unscrew the bolts securing the bumper to the side members (2 pcs. on each side).
- Remove the clips holding the bumper on the sides (under the rear lights).
- Disconnect the rear fog lamp connectors (if equipped).
- Carefully remove the bumper by pulling it back and up.
When installing a new bumper be sure to check:
- 🔹 Coincidence of holes for the tow bar (if you plan to install it).
- 🔹 Gaps between the bumper and rear fenders (must be symmetrical).
- 🔹 Operability of parking sensors (if installed).
If the rear bumper Wingroad Y11 after installation, it “sags” in the center, place rubber pads 3–5 mm thick under the fastenings. This will eliminate the sag without damaging the plastic.
Bumper tuning: from painting to body kits
Standard bumpers Wingroad Y11 They look modest, but they are easy to modify. Here are the popular tuning options:
| Type of tuning | Cost (₽) | Difficulty | Notes |
|---|---|---|---|
| Painting in body color | 5 000–12 000 | Average | Requires removal of bumper and primer |
| Splitter installation | 3 000–8 000 | Low | Attaches with self-tapping screws or double-sided tape |
| Body kit (lip kit) | 15 000–40 000 | High | Requires modification of fastenings |
| Chrome plating of the grille | 8 000–15 000 | Average | Combines with headlight tint |
| Installation of LED strip | 2 000–5 000 | Low | Mounted under the bumper or in the PTF |
To paint the bumper, use acrylic enamel with preliminary priming - this will ensure resistance to chipping. If you want to install a body kit, pay attention to the kits from TRD or Nismo, but be prepared to modify the fastenings: original body kits for Wingroad Y11 are not produced, so universal solutions are used.
How to paint the Wingroad Y11 bumper yourself?
1. Remove the bumper and clean it of dirt. 2. Putty on chips and uneven surfaces. 3. Apply 2 layers of primer and dry. 4. Paint in 3 layers of acrylic paint at 15-minute intervals. 5. Varnish and polish after 24 hours.
Common problems and their solutions
Owners Wingroad Y11 often encounter typical bumper problems:
- 🔧 Cracks in plastic: appear due to shock or temperature changes. The solution is to weld the plastic with a soldering iron or use epoxy glue 3M.
- 🔧 Peeling paint: occurs due to corrosion of the metal base (on the rear bumper). The solution is to remove the rust, treat it with a converter and repaint it.
- 🔧 Creaks when moving: The cause is usually worn out caps. The solution is to replace them with new ones (article no.
01515-4M00A). - 🔧 Gap mismatch: after replacing the bumper. The solution is to adjust the fasteners or add spacers.
If the bumper Wingroad Y11 after an accident it is deformed, but there are no cracks, it can be straightened with a hair dryer. Heat the plastic to 80-90°C and carefully shape it using a wooden block. Do not use metal tools - they can damage the surface.
When repairing cracks in the bumper Wingroad Y11 be sure to reinforce the seam on the reverse side with fiberglass - this will prevent repeated cracking.
Where to buy a bumper for Wingroad Y11: trusted suppliers
Bumper prices for Wingroad Y11 vary depending on type (front/rear), material and manufacturer. Here are the current proposals for 2026:
| Bumper type | Original (₽) | Analogue (₽) | Where to buy |
|---|---|---|---|
| Front (without PTF) | 22 000–28 000 | 8 000–15 000 | Exist.ru, Autodoc |
| Front (with PTF) | 25 000–32 000 | 12 000–18 000 | Nissan-original.ru |
| Rear (standard) | 18 000–24 000 | 7 000–12 000 | Avtoall.ru, Emex |
| Rear (with cutout for tow bar) | 20 000–26 000 | 9 000–14 000 | PartReview |
When purchasing through online stores always check:
- 📌 Compatible with your modification Wingroad Y11 (for example, bumpers for versions with
ABSand without it are different). - 📌 Availability of warranty (minimum period - 6 months).
- 📌 Possibility of return if the item does not fit.
The best prices are usually offered by stores that ship directly from Japan or Taiwan. Avoid shopping on Avito or Yule without checking reviews - they often sell used parts with hidden defects.
FAQ: answers to frequently asked questions
Is it possible to install a bumper from Nissan AD on Wingroad Y11?
No, bumpers Nissan AD not compatible with Wingroad Y11 due to different body geometry and fastenings. The exception is some universal body kits, but they will have to be modified.
What is the best adhesive for repairing cracks on a bumper?
The best option is two-component epoxy glue. 3M 05907 or Loctite Plastics Bonding System. They withstand vibrations and temperature changes. For reinforcement, use fiberglass mesh.
Do I need to paint the new bumper before installation?
Original bumpers Nissan supplied primed (color KH3 - “black gravel”) If you want the bumper to match the body color, you will have to paint it. Analogues are often already painted, but the quality of the coating may be poor.
How much does it cost to replace a bumper at a service center?
The cost of replacing the front bumper in a car service is 3,000–5,000 rubles, the rear bumper is 2,500–4,000 rubles. If painting is required, add another 5,000–10,000 RUR.
Is it possible to drive without a bumper?
Technically, yes, but this violates traffic rules (Article 12.5 of the Administrative Code, fine 500 ₽). In addition, the absence of a bumper increases the risk of damage to the radiator, headlights and body.