Bumper for Nissan Cefiro A32: how to choose, replace and upgrade

Nissan Cefiro A32 (1994–2003) - a legendary business class sedan that is still in demand due to its reliability, comfort and stylish design. However, even such a time-tested car has weak points - and bumpers are among them. Over time, they lose their appearance, crack from impacts, or simply become obsolete. In this article we will look at everything you need to know about bumpers for Cefiro A32: from choosing between the original and analogues to step-by-step replacement and creative tuning.

The peculiarity of the bumpers of this model is their design: the front one often suffers from parking and minor accidents, and the rear one from corrosion and wear of the fasteners. At the same time, the market offers dozens of options: from used originals to replicas from Aliexpress. How not to make a mistake with your choice? When should you repair and when should you just replace? And how to transform the appearance of a car with the help of tuning? The answers are below.

Original bumpers vs analogues: what to choose for Cefiro A32?

The first question that arises among owners Nissan Cefiro A32: Buy an original bumper or save on an analogue? Original parts (front part numbers: 62010-4M000, rear: 62110-4M000) guarantee a perfect fit and durability, but their price starts from 15,000 rubles for a new one and 5,000–8,000 rubles for used in good condition. Analogues (for example, from DPA, Febi or Chinese manufacturers) will cost 3,000–6,000 rubles, but here it is important to check the quality of the plastic and the compatibility of the fasteners.

The main advantages of the originals:

• 🔹 Exact match with the body - no gaps or distortions.
• 🔹 Resistant to UV rays (does not fade, does not crack).
• 🔹 Durability - withstands impacts up to 10 km/h no damage.

The disadvantages of analogues often appear after a year or two: the plastic becomes brittle, the paint peels off, and the fasteners do not match the original holes. However, there are worthy exceptions - for example, bumpers from TYC or APA, which are close in quality to the original, but 30–40% cheaper. When choosing an analogue, be sure to check with catalog numbers and reviews on forums (for example, Drive2 or Cefiro-Club).

⚠️ Attention: Bumpers for the restyled version Cefiro A32 (1998–2003) are not compatible with pre-restyle (1994–1997)! The differences are in the shape of the air intakes and the foglight mounts.

Front vs rear bumper: features and typical problems

Front and rear bumpers Cefiro A32 differ not only in design, but also in “diseases”. The front one more often suffers from mechanical damage (scratches, cracks, chips), and the rear one more often suffers from corrosion of the fasteners and burnout of the plastic. Let's take a closer look:

Characteristics	Front bumper	Rear bumper
Major damage	Cracks from impacts, chipped paintwork, deformation of fasteners	Corrosion of metal elements, burnout of plastic, peeling of paint
Difficulty of replacement	Medium (requires removal of headlights and grille)	Simple (just unscrew 4–6 bolts)
Cost of a new original	15 000–18 000 ₽	12 000–15 000 ₽
Popular analogues	DPA, Febi, TYC	APA, Hans Pries, Chinese replicas

Particular attention should be paid fastenings: on the front bumper they often break during dismantling, and on the rear bumper they rust due to moisture. If you are buying a used part, check the condition of the metal brackets (items: 62020-4M000 for the front, 62120-4M000 for the rear). Replacing them will cost additional 1,500–2,500 rubles.

Important: On Cefiro A32 with engine VQ25DE the front bumper has additional air intakes for cooling - their absence on the analogue will lead to overheating of the engine!

Step-by-step instructions: how to remove and install the bumper on a Cefiro A32

Replacing a bumper is a task of average complexity that can be completed independently in 2–3 hours. The main thing is to follow the algorithm and take your time. Below are instructions for front bumper (the rear one is easier to change - without removing the optics).

Required tools:

• 🔧 Set of heads (10 mm, 12 mm).
• 🔧 Phillips and flat screwdriver.
• 🔧 Plastic clips (item no. 01515-4M00A, ~10 pcs.).
• 🔧 WD-40 (for stuck bolts).

Procedure:

1. Disconnect the battery terminal (to avoid short circuit when working with headlights).
2. Remove the radiator grille (unscrew the 4 bolts from the bottom and 2 clips from the top).
3. Disconnect the wires from the fog lights (if equipped).
4. Unscrew the bolts securing the bumper to the wings (2 on each side) and 4 bolts from the bottom.
5. Carefully pull the bumper towards you, releasing it from the latches.
6. Install the new bumper in reverse order, first checking the condition of the seals.

⚠️ Attention: When installing the front bumper, do not tighten the mounting bolts to the fenders all the way - this may deform the plastic. Optimal force: 10–12 Nm.

What to do if the bumper doesn't fit in place?

If the new bumper does not fit into the body, check:

1) The condition of the fasteners on the body (they may be bent).

2) The presence of all clips (often lost during dismantling).

3) Correct installation of seals between the bumper and fenders.

If the problem remains, the bumper may be non-original or defective.

Bumper tuning: from painting to complete modification

Standard bumpers Cefiro A32 They look solid, but many owners want individuality. There are a lot of tuning options - from cosmetic to drastic. Let's look at the most popular:

1. Painting and airbrushing

• 🎨 Matte or glossy finish (for example, Plasti Dip for temporary effect).
• 🎨 Two-tone paint (classic - black bottom + body color).
• 🎨 Airbrush (from 5,000 rubles for a simple drawing).

2. Installation of body kits

• 🚗 Lip spoilers for the rear bumper (from 3,000 rubles).
• 🚗 Mesh grille or carbon inserts (item no. 62030-JM00A).
• 🚗 Wheel arch extensions (for an aggressive look).

3. Modernization of functionality

• 💡 Installation of LED fog lights (for example, Osram LEDriving).
• 💡 Parking sensors (set from ParkMaster will cost 4,000–6,000 rubles).
• 💡 Protective mesh for air intakes (prevents stones from entering).

For radical changes, you can consider bumpers from other models Nissan (for example, from Laurel C34 or Skyline R33), but this will require modification of the fastenings and painting. The cost of such tuning is from 20,000 rubles.

Bumper repair: when is it cheaper than replacement?

A crack or chip is not always a death sentence for a bumper. In some cases, repairs are cheaper than replacements, especially if we are talking about an original part. Let's look at typical damage and how to fix it:

1. Cracks and holes

• 🔧 Small cracks (up to 5 cm) can be welded with a soldering iron with plastic solder.
• 🔧 Major damage - only with fiberglass and epoxy resin.

2. Chips and scratches

• 🎨 Small chips - polishing with paste 3M Rubbing Compound.
• 🎨 Deep scratches - putty + paint (from 2,000 rubles in the service).

3. Deformation of fastenings

• 🔧 Metal brackets can be straightened with a hammer or replaced (cost: 500–1 000 ₽ per piece).
• 🔧 Plastic clips - replacement only (a set of 10 pieces costs ~300 rubles).

Repair is beneficial if:

• 💰 The cost of work does not exceed 30% of the price of a new bumper.
• 💰 The part is original or a high-quality analogue.
• 💰 The damage is not safety critical (for example, the crack is not near the fastening).

⚠️ Attention: If the bumper is cracked at the point of attachment to the body, repair is impractical - the next time it is hit, it will fall apart. In this case, only replacement!

Where to buy a bumper for Cefiro A32: verified sellers and prices

The choice of where to buy depends on your budget and quality requirements. Let's look at the main options:

1. Official dealers Nissan

• ✅ Originality guaranteed.
• ❌ Prices are 20–30% higher than those of unofficial suppliers.

2. Online spare parts stores

• 🌍 Exist.ru, Autodoc.ru - a wide range of analogues.
• 🌍 Emex.ru — often there are used originals in good condition.
• 🌍 AliExpress - budget replicas (but the risk of mismatched fastenings).

3. Showdowns and forums

• 🔧 Drive2, Cefiro-Club.ru - private sellers with photos of real condition.
• 🔧 Local showdowns (for example, in Moscow - Auto analysis on Dmitrovka).

Bumper type	Where to buy	Average price (₽)	Delivery time
Original new	Official dealer	15 000–18 000	3–7 days
Original used	Emex, disassembly	5 000–8 000	1–3 days
Analogue (DPA, Febi)	Exist, Autodoc	3 000–6 000	2–5 days
Replica (China)	AliExpress	2 000–4 000	20–40 days

When purchasing a used bumper, be sure to request a photo:

• 📸 Fastenings from the inside.
• 📸 Conditions of paintwork in bright lighting.
• 📸 Places of joints with the body (are there any deformations).

Common mistakes when choosing and replacing a bumper

Even experienced car owners sometimes make mistakes that lead to additional expenses. Here are the most common:

1. Buying a bumper without checking the article number

On Cefiro A32 there were several modifications to the bumpers (for example, for versions with VQ20DE And VQ25DE air intakes are different). Always check with VIN code or catalog numbers.

2. Saving on fastenings

Old clips and bolts often break during dismantling. Buy a set of new ones in advance (item no. 01515-4M00A for clips, 08915-14010 for bolts).

3. Ignoring preparation before painting

If you do not remove the old paint and treat the plastic with primer, the new paint will last a maximum of a year. Use adhesive primer (For example, APP Primer).

4. Incorrect installation of fog lights

If the fog lights do not work after replacing the bumper, check:

• 🔌 Connecting connectors (on Cefiro A32 they often oxidize).
• 🔌 Integrity of the wiring (especially if the bumper was removed with a sledgehammer).

5. Forget about adjustments after installation

After replacing the front bumper, check:

• 🔍 The gaps between the bumper and fenders (must be the same).
• 🔍 Operability of parking sensors (if installed).

💡

Before buying a bumper from disassembly, ask the seller to measure its dimensions. Original dimensions of the front bumper: 1800×400×200 mm (length×width×height).

FAQ: Answers to popular questions about Cefiro A32 bumpers

Is it possible to install a bumper from a Nissan Laurel C34 on a Cefiro A32?

Technically possible, but it will require modification of the fastenings and adjustment of the width (bumper Laurel already 5 cm). You will also need to repaint the part, as the body shades may not match. The cost of such tuning is from 25,000 rubles taking into account the work.

What glue is best to use to repair cracks?

For plastic bumpers Cefiro A32 (material - polypropylene) will suit:

• 🔧 3M Plastic Welding Epoxy (two-component, strength 240 kg/cm²).
• 🔧 Loctite Plastics Bonding System (suitable for vertical surfaces).

Before gluing, be sure to clean and degrease the surface!

How much does it cost to paint a bumper at a service center?

The price depends on the complexity of the work:

• 🎨 Local painting (1–2 elements) — 3 000–5 000 ₽.
• 🎨 Full painting with primer - 8 000–12 000 ₽.
• 🎨 Painting + airbrush - from 15 000 ₽.

Self-painting with a spray can will cost 1 500–2 500 ₽, but the quality will be worse.

How to protect the bumper from chips and cracks?

Effective ways:

• 🛡️ Coverage liquid glass (For example, Willson Silane Guard) - protection for 1–2 years.
• 🛡️ Installation transparent protective film (from 5 000 ₽).
• 🛡️ Regular processing wax or ceramic coating.

Avoid high pressure washing - it will destroy the paintwork over time.

Where can I find a wiring diagram for the fog lights for the bumper?

Connection diagram for fog lights on Cefiro A32 standard:

• 🔌 Plus - from the relay (pin 87) to the lamp.
• 🔌 Minus - on the body (weight).
• 🔌 Control - via a button on the panel (relay contact 85).

A detailed diagram can be found in electrical manual (section Lighting System).